From 09925c1281165db684e517ed4b3a40e6e5e24f66 Mon Sep 17 00:00:00 2001
From: akukan <akukan@outlook.com>
Date: Wed, 29 Nov 2017 17:11:28 +0100
Subject: [PATCH] Delete extruder-body.scad

---
 Printed-Parts/scad/extruder-body.scad | 134 --------------------------
 1 file changed, 134 deletions(-)
 delete mode 100644 Printed-Parts/scad/extruder-body.scad

diff --git a/Printed-Parts/scad/extruder-body.scad b/Printed-Parts/scad/extruder-body.scad
deleted file mode 100644
index a81fac6..0000000
--- a/Printed-Parts/scad/extruder-body.scad
+++ /dev/null
@@ -1,134 +0,0 @@
-// PRUSA iteration3
-// Extruder-body
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-
-use <extruder-main.scad>
-
-
-module m3nut()
-{
-difference()
-{    
-cube([2,6,8]);
-translate([-0.5,3,3]) rotate([0,90,0]) cylinder(r=1.25, h=3, $fn=20);
-}
-}
-
-
-module ext_body(){
-    
-    difference(){
-       extruder_body();
-       extruder_mount_holes();
-        
-        // PINDA entry hole
-        translate([-5.5,37,6])rotate([90,0,0])cylinder(r=4.4, h=40, $fn=20); 
-    }
-    
-}
-
-    
-difference()
-{
-    ext_body();
-    
-    // remove old pinda
-    translate([-20,26,-2]) cube([20,30,30]);
-
-    // screw end larger hole
-    translate([-20,40,12])rotate([0,90,0])cylinder(r=1.5, h=24, $fn=20);    
-    translate([2,40,11.5])rotate([0,90,0])cylinder(r=1.5, h=3, $fn=20); 
-    translate([2,40,12])rotate([0,90,0])cylinder(r=1.5, h=3, $fn=20); 
-    translate([2,40,12.5])rotate([0,90,0])cylinder(r=1.5, h=3, $fn=20); 
-
-    // M3 nuts 
-    translate([0,46,9]) m3nut();
-    translate([0,37,9]) m3nut();
-    
-    translate([0,42,9]) m3nut();
-    translate([2,45,11.5])rotate([0,90,0])cylinder(r=1.6, h=3, $fn=20); 
-    translate([2,45,12])rotate([0,90,0])cylinder(r=1.6, h=3, $fn=20); 
-    translate([2,45,12.5])rotate([0,90,0])cylinder(r=1.6, h=3, $fn=20); 
-    translate([-20,45,12])rotate([0,90,0])cylinder(r=1.6, h=25, $fn=20);
-    
-}
-
-module ex_body()
-{ 
-    
-difference()
-{
-    
-    union()
-    {    
-        // body
-        // round body
-        translate([-5.5,35.5,6])rotate([-90,0,0])cylinder(r=8.5, h=20, $fn=20);
-        // body block
-        translate([-13,35.5,5]) cube([17,20,10]);
-        translate([-13,35.5,15]) cube([5,20,1]);
-        
-        // extruder body joint
-        translate([-0,33.5,0]) cube([3,2,15]);
-        translate([0,34,0]) cube([4,3,15]);
-        translate([0,35.5,0]) rotate([0,0,45]) cube([2,2,15]);
-        
-        // m3 nut lock
-     #translate([32.5,6.5,14])rotate([0,45,0]) cube([1,7,1], center=true);
-     #translate([26.5,6.5,14])rotate([0,45,0]) cube([1,7,1], center=true);
-
-    }   
-
-
-    // PINDA lower hole
-    translate([-5.5,50,6])rotate([-90,0,0])cylinder(r=4.1, h=40, $fn=20);
-
-    // M3 screws 
-    //#translate([-20,49,12])rotate([0,90,0])cylinder(r=1.6, h=24, $fn=20);    
-    translate([-20,45,12])rotate([0,90,0])cylinder(r=1.6, h=25, $fn=20);    
-    translate([-14,45,12])rotate([0,90,0])cylinder(r=3, h=5, $fn=20);   
-
-    // upper M3 screw end opening
-    translate([2,45,11.5])rotate([0,90,0])cylinder(r=1.6, h=3, $fn=20); 
-    translate([2,45,12])rotate([0,90,0])cylinder(r=1.6, h=3, $fn=20); 
-    translate([2,45,12.5])rotate([0,90,0])cylinder(r=1.6, h=3, $fn=20); 
-    
-    // M3 nuts opening
-    translate([0,42,9]) m3nut();
-
-    // flat bottom side
-    translate([-20,33,-10]) cube([30,35,10]);
-
-    // slot
-    translate([-6,33,8]) cube([1.3,25,10]);
-
-    // 45 / 30 deg edges 
-    translate([-15,32,12]) rotate([45,0,0]) cube([15,10,10]);
-    translate([-20,55,13]) rotate([45,0,0]) cube([25,3,5]);
-
-    translate([-2,45,-1]) rotate([0,30,0]) cube([15,15,15]);
-    translate([7,46,-1]) rotate([0,0,30]) cube([15,11,25]);
-
-    //PINDA mounting hole
-    translate([-5.5,60,6])rotate([90,0,0])cylinder(r=4.2, h=60, $fn=20); 
-    translate([-5.5,41,6])rotate([90,0,0])cylinder(r=4.4, h=5, $fn=20); 
-
-    // bottom cut
-    translate([-15,54.5,-1])  cube([20 , 8,20]); 
-
-    
-    for ( i = [0 : 14] )
-        {
-          translate([-5.5,39+i,6])rotate([90,0,0])cylinder(r1=4.5, r2=3, h=1, $fn=20); 
-          translate([-5.5,40+i,6])rotate([90,0,0])cylinder(r1=3, r2=4.5, h=1, $fn=20);
-        }
-
-}
-
-}
-
-ex_body();