diff --git a/Printed-Parts/scad/y-corners.scad b/Printed-Parts/scad/y-corners.scad
index 8c9c336..e920e43 100755
--- a/Printed-Parts/scad/y-corners.scad
+++ b/Printed-Parts/scad/y-corners.scad
@@ -1,65 +1,65 @@
-// PRUSA iteration3
-// Y frame corners
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-
-module corner_base(){	
- translate([-9,-11,0])cube([18,22,49]);
-}
-
-module corner_holes(){
- translate([-11,-11,0]){
-  // Bottom hole
-  translate([0,11,10]) rotate([0,90,0]) translate([0,0,-5]) cylinder(h = 270, r=4.4, $fn=30);
-  // Top hole
-  translate([0,11,30]) rotate([0,90,0]) translate([0,0,-5]) cylinder(h = 270, r=4.4, $fn=30);
-  // Middle hole
-  translate([11,0,20]) rotate([0,0,90]) rotate([0,90,0]) translate([0,0,-5]) cylinder(h = 270, r=5.4, $fn=30);
-
-  // Washer hole
-  translate([11,-3,20]) rotate([0,0,90]) rotate([0,90,0]) translate([0,0,-5]) cylinder(h = 10, r=11, $fn=30);
-
-  // Top smooth rod insert
-  // Smooth rod place
-  translate([11,1.5,47]) rotate([0,90,90]) cylinder(h = 12.5, r=4.2, $fn=30); 
-  // Ziptie
-  translate([-5,9,41])  cube([30,3.5,2]);
-  
-  // LM8UU keepout
-  difference(){
-    translate([11,14,46]) rotate([0,90,90]) cylinder(h = 270, r=8, $fn=30);
-    translate([21,14,62]) rotate([0,90,90]) cube([20,20,30]);
-  } 
-   translate([21,14,62-0.2]) rotate([0,90,90]) cube([20,20,0.2]);
-   translate([21,14,42]) rotate([0,90,90]) cube([0.2,20,20]);
-     
- }
-}
-
-module corner_fancy(){
- // Side corner cutouts
-  translate([-8,-9,0]) rotate([0,0,-45-180]) translate([-15,0,-1]) cube([30,30,51]);
-  translate([8,-9,0]) rotate([0,0,45-180]) translate([-15,0,-1]) cube([30,30,51]);
- // Top corner cutouts
-  translate([7,0,49]) rotate([0,45,0]) translate([-15,-15,0]) cube([30,30,30]);
-  translate([-7,0,49]) rotate([0,-45,0]) translate([-15,-15,0]) cube([30,30,30]);
-  rotate([0,0,90]){
-   translate([-9.5,0,49]) rotate([0,-45,0]) translate([-15,-15,0]) cube([30,30,30]);
-  }
-}
-
-
-// Final part
-module corner(){
- // Rotate the part for better printing
- translate([0,0,11]) rotate([-90,0,0]) difference(){
-  corner_base();
-  corner_holes();
-  corner_fancy();
- }
-}
-
-rotate([90,0,0]) corner();
+// PRUSA iteration3
+// Y frame corners
+// GNU GPL v3
+// Josef Průša <iam@josefprusa.cz> and contributors
+// http://www.reprap.org/wiki/Prusa_Mendel
+// http://prusamendel.org
+
+
+module corner_base(){	
+ translate([-9,-11,0])cube([18,22,49]);
+}
+
+module corner_holes(){
+ translate([-11,-11,0]){
+  // Bottom hole
+  translate([0,11,10]) rotate([0,90,0]) translate([0,0,-5]) cylinder(h = 270, r=4.4, $fn=30);
+  // Top hole
+  translate([0,11,30]) rotate([0,90,0]) translate([0,0,-5]) cylinder(h = 270, r=4.4, $fn=30);
+  // Middle hole
+  translate([11,0,20]) rotate([0,0,90]) rotate([0,90,0]) translate([0,0,-5]) cylinder(h = 270, r=5.4, $fn=30);
+
+  // Washer hole
+  translate([11,-3,20]) rotate([0,0,90]) rotate([0,90,0]) translate([0,0,-5]) cylinder(h = 10, r=11, $fn=30);
+
+  // Top smooth rod insert
+  // Smooth rod place
+  translate([11,2.75,47]) rotate([0,90,90]) cylinder(h = 11.25, r=4.2, $fn=30); 
+  // Ziptie
+  translate([-5,9,41])  cube([30,3.5,2]);
+  
+  // LM8UU keepout
+  difference(){
+    translate([11,14,46]) rotate([0,90,90]) cylinder(h = 270, r=8, $fn=30);
+    translate([21,14,62]) rotate([0,90,90]) cube([20,20,30]);
+  } 
+   translate([21,14,62-0.2]) rotate([0,90,90]) cube([20,20,0.2]);
+   translate([21,14,42]) rotate([0,90,90]) cube([0.2,20,20]);
+     
+ }
+}
+
+module corner_fancy(){
+ // Side corner cutouts
+  translate([-8,-9,0]) rotate([0,0,-45-180]) translate([-15,0,-1]) cube([30,30,51]);
+  translate([8,-9,0]) rotate([0,0,45-180]) translate([-15,0,-1]) cube([30,30,51]);
+ // Top corner cutouts
+  translate([7,0,49]) rotate([0,45,0]) translate([-15,-15,0]) cube([30,30,30]);
+  translate([-7,0,49]) rotate([0,-45,0]) translate([-15,-15,0]) cube([30,30,30]);
+  rotate([0,0,90]){
+   translate([-9.5,0,49]) rotate([0,-45,0]) translate([-15,-15,0]) cube([30,30,30]);
+  }
+}
+
+
+// Final part
+module corner(){
+ // Rotate the part for better printing
+ translate([0,0,11]) rotate([-90,0,0]) difference(){
+  corner_base();
+  corner_holes();
+  corner_fancy();
+ }
+}
+
+rotate([90,0,0]) corner();
diff --git a/Printed-Parts/stl/y-corners.stl b/Printed-Parts/stl/y-corners.stl
index d46e017..84c230b 100755
Binary files a/Printed-Parts/stl/y-corners.stl and b/Printed-Parts/stl/y-corners.stl differ