From 0f9dc67c7981c477c8187d7562c6667614dc38b5 Mon Sep 17 00:00:00 2001
From: akukan <akukan@outlook.com>
Date: Tue, 12 Dec 2017 17:24:40 +0100
Subject: [PATCH] Delete bearing.scad

---
 Printed-Parts/scad/bearing.scad | 83 ---------------------------------
 1 file changed, 83 deletions(-)
 delete mode 100644 Printed-Parts/scad/bearing.scad

diff --git a/Printed-Parts/scad/bearing.scad b/Printed-Parts/scad/bearing.scad
deleted file mode 100644
index 089808f..0000000
--- a/Printed-Parts/scad/bearing.scad
+++ /dev/null
@@ -1,83 +0,0 @@
-// PRUSA iteration3
-// Bearing holders
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-use <polyholes.scad>
-
-bearing_diameter = 14.95;
-
-module horizontal_bearing_base(bearings=1){
- translate(v=[0,0,6]) cube(size = [24,8+bearings*25,12], center = true);	
-}
-
-module horizontal_bearing_holes(bearings=1){
- cutter_lenght = 10+bearings*25;
- one_holder_lenght = 8+25;
- holder_lenght = 8+bearings*25;
- 
- // Main bearing cut
- difference(){
-  translate(v=[0,0,12]) rotate(a=[90,0,0]) translate(v=[0,0,-cutter_lenght/2]) cylinder(h = cutter_lenght, r=(bearing_diameter/2)+0.2, $fn=50);
-  // Bearing retainers
-  translate(v=[0,1-holder_lenght/2,3]) cube(size = [24,6,8], center = true);
-  translate(v=[0,-1+holder_lenght/2,3]) cube(size = [24,6,8], center = true);
- }
- 
- // Ziptie cutouts
- ziptie_cut_ofset = 0;
- for ( i = [0 : bearings-1] ){
-  // For easier positioning I move them by half of one 
-  // bearing holder then add each bearign lenght and then center again
-  translate(v=[0,-holder_lenght/2,0]) translate(v=[0,one_holder_lenght/2+i*25,0]) difference(){
-   union(){
-    translate(v=[0,2-8.5,12]) rotate(a=[90,0,0]) translate(v=[0,0,0]) cylinder(h = 4, r=11.5, $fn=50);
-    translate(v=[0,2+8.5,12]) rotate(a=[90,0,0]) translate(v=[0,0,0]) cylinder(h = 4, r=11.5, $fn=50);
-   }
-   translate(v=[0,12,12]) rotate(a=[90,0,0]) translate(v=[0,0,0]) cylinder(h = 24, r=9, $fn=50);
-  }
- }
- 
-}
- 
-module horizontal_bearing_holes_nozip(bearings=1){
- cutter_lenght = 10+bearings*25;
- one_holder_lenght = 8+25;
- holder_lenght = 8+bearings*25;
- 
- // Main bearing cut
- difference(){
-  translate(v=[0,0,12]) rotate(a=[90,0,0]) translate(v=[0,0,-cutter_lenght/2]) cylinder(h = cutter_lenght, r=(bearing_diameter/2)+0.2, $fn=50);
-  // Bearing retainers
-  translate(v=[0,1-holder_lenght/2,3]) cube(size = [24,6,8], center = true);
-  translate(v=[0,-1+holder_lenght/2,3]) cube(size = [24,6,8], center = true);
- }
- 
-}
-
-
-thinwall = 3;
-bearing_size = bearing_diameter + 2 * thinwall;
-
-module vertical_bearing_base(){
- translate(v=[-2-bearing_size/4,0,29]) cube(size = [4+bearing_size/2,bearing_size,58], center = true);
- cylinder(h = 58, r=bearing_size/2, $fn = 90);
-}
-
-module vertical_bearing_holes(){
-  translate(v=[0,0,-1]) poly_cylinder(h = 62, r=(bearing_diameter/2));
-  translate(v=[0,0,-0.1]) cylinder(r1=(bearing_diameter/2)+0.7,r2=(bearing_diameter/2), h=0.5);
-  rotate(a=[0,0,-40]) translate(v=[bearing_diameter/2-2.9,-0.5,0.5]) cube(size = [thinwall*2,1,62]);
-
-}
-
-//difference(){
-//vertical_bearing_base();
-//vertical_bearing_holes();
-//}
-//horizontal_bearing_test();
-//horizontal_bearing_base(1);
-//horizontal_bearing_holes(1);
-horizontal_bearing_holes_nozip(1);
\ No newline at end of file