diff --git a/Printed-Parts/scad/x-end.scad b/Printed-Parts/scad/x-end.scad
deleted file mode 100644
index 26607db..0000000
--- a/Printed-Parts/scad/x-end.scad
+++ /dev/null
@@ -1,150 +0,0 @@
-// PRUSA iteration4
-// X end prototype
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-use <bearing.scad>
-use <polyholes.scad>
-rod_distance = 45;
-
-module x_end_base()
-{
-    
-    
-    
-    // Main block
-    height = 58;
-    translate(v=[-15,-9,height/2]) cube(size = [17,39,height], center = true);
-    translate([-8,-28.5,0]) cube(size = [5,1,13.5]);
-    
-    // Bearing holder
-    vertical_bearing_base();	
-    
-    //Nut trap
-    // Cylinder
-    translate(v=[0,-17,0]) cylinder(h = 13.5, r=12.5, $fn=100);
-    difference()
-    {
-        translate(v=[0,-17,13]) poly_cylinder(h = 3, r=12.5, $fn=25);
-        translate(v=[8,-17,12]) rotate([0,0,0]) cube(size = [15,50,10], center = true);
-        translate(v=[8,-24,12]) rotate([0,0,0]) cube(size = [50,15,10], center = true);
-        translate(v=[0,-17, -1]) cylinder(h = 20, r = 6.7, $fn = 60);
-    }
-    
-    
-
-    
-    
-    
-    
-}
-module reinforcement_selective_infill()
-{
-    rotate([90,0,-15,]) translate ([-1.5, 8, 26])linear_extrude(height = 0.2) polygon( points=[[-2,0],[0,5],[8,0]] ); 
-    rotate([90,0,-50,]) translate ([8.5, 8, 1.4])linear_extrude(height = 0.2) polygon( points=[[0,0],[0,5],[12,0]] ); 
-}
-    
-   
-    
-module x_end_holes()
-{
-    vertical_bearing_holes();
-    // Belt hole
-    translate(v=[-1,0,0])
-    {
-        // Stress relief
-        translate(v=[-5.5-10+1.5,-10-1,30]) cube(size = [18,1,28], center = true);
-        difference()
-        {
-        
-        translate(v=[-5.5-10+1.5,-10,30]) cube(size = [10,46,28], center = true);
-
-        // Nice edges
-        translate(v=[-5.5-10+1.5-5,-10,30+23]) rotate([0,20,0]) cube(size = [10,46,28], center = true);
-        translate(v=[-5.5-10+1.5+5,-10,30+23]) rotate([0,-20,0]) cube(size = [10,46,28], center = true);
-        translate(v=[-5.5-10+1.5,-10,30-23]) rotate([0,45,0]) cube(size = [10,46,28], center = true);
-        translate(v=[-5.5-10+1.5,-10,30-23]) rotate([0,-45,0]) cube(size = [10,46,28], center = true);
-
-        }
-    }
-
-
-// Bottom pushfit rod
-    translate(v=[-15,-41,6]) rotate(a=[-90,0,0]) pushfit_rod(7.8,50);
-
-// Top pushfit rod
-    translate(v=[-15,-41.5,rod_distance+6]) rotate(a=[-90,0,0]) pushfit_rod(7.8,50);
-
-// TR Nut trap
-   // Hole for the nut
-    //#translate(v=[0,-17, -1]) poly_cylinder(h = 9.01, r = 6.7, $fn = 60);
-    translate(v=[0,-17, -1]) cylinder(h = 14.51, r = 6.7, $fn = 60);
-    translate(v=[0,-17, -0.1]) cylinder(h = 1, r1 = 7.2,r2 = 6.7, $fn = 60);
-
-// Screw holes for TR nut
-   
-   
-    translate(v=[0,-17, 0]) rotate([0, 0, -135]) translate([0, 9.5, -4]) cylinder(h = 19, r = 1.65, $fn=50);
-    
-    translate(v=[0,-17, 0]) rotate([0, 0, -135]) translate([0, -9.5, -4]) cylinder(h = 19, r = 1.65, $fn=50);
-        
-    
-  
-    translate(v=[0,-17,0]) rotate([0,0,-135]) translate([0,9.5,-1]) cylinder(h=2, r1=2.2,r2=1.65, $fn=50);
-    translate(v=[0,-17,0]) rotate([0,0,-135]) translate([0,-9.5,-1]) cylinder(h=2, r1=2.2,r2=1.65,, $fn=50);
-
-
-// Nut traps for TR nut screws
-    translate(v=[0,-17, 0]) rotate([0, 0, -135]) translate([0, 9.5, 11]) rotate([0, 0, 0])cylinder(h = 6, r = 3.1, $fn=6);
-
-    translate(v=[0,-17, 0]) rotate([0,0,-135]) translate([0,-9.5,10]) rotate([0,0,30])cylinder(h = 4, r = 3.2, $fn=6);
-    translate([-5.5,-17.2,10]) rotate([0,0,32]) cube([5,5.9,3.5]);
-    translate([-0,-17.2,10]) rotate([0,0,58]) cube([5,10,3.5]);
-    
-   
-    
-   
-    
-}
-
-
-// Final prototype
-module x_end_plain()
-{
-    difference()
-    {
-    union()
-    {
-        difference()
-        {
-            x_end_base();
-            x_end_holes();
-        }
-       
-    }
-
-    }
-    
-   
-    
-
-}
-
-
-
-module pushfit_rod(diameter,length)
-{
-    poly_cylinder(h = length, r=diameter/2);
-    difference()
-    {
-        translate(v=[0,-diameter/2.85,length/2]) rotate([0,0,45]) cube(size = [diameter/2,diameter/2,length], center = true);
-        translate(v=[0,-diameter/4-diameter/2-0.4,length/2]) rotate([0,0,0]) cube(size = [diameter,diameter/2,length], center = true);
-    }
-}
-difference () {
-x_end_plain();
-  //translate([-50,-50,-1]) rotate([0,0,0]) cube([100,100,5]);  
-}
-//    
\ No newline at end of file