diff --git a/Printed-Parts/scad/x-end-motor.scad b/Printed-Parts/scad/x-end-motor.scad
deleted file mode 100644
index 43308a5..0000000
--- a/Printed-Parts/scad/x-end-motor.scad
+++ /dev/null
@@ -1,152 +0,0 @@
-// PRUSA iteration4
-// X end motor
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-use <x-end.scad>
-
-module x_end_motor_base()
-{
-    x_end_base();
-    translate(v=[-15,31,26.5]) cube(size = [17,44,53], center = true);
-}
-
-module x_end_motor_holes()
-{
-    x_end_holes();
-    
-    // Position to place
-    translate(v=[-1,32,30.25])
-    {
-        // Belt hole
-        translate(v=[-14,1,0]) cube(size = [10,46,22], center = true);
-        
-        // Motor mounting holes
-        translate(v=[20,-15.5,-15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h=70, r=1.8, $fn=30);
-        translate(v=[1,-15.5,-15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h=10, r=3.1, $fn=30);
-        translate(v=[20,-15.5,15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h=70, r=1.8, $fn=30);
-        translate(v=[1,-15.5,15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h=10, r=3.1, $fn=30);
-        translate(v=[20,15.5,-15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h=70, r=1.8, $fn=30);
-        translate(v=[1,15.5,-15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h=10, r=3.1, $fn=30);
-        translate(v=[20,15.5,15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h=70, r=1.8, $fn=30);
-        translate(v=[1,15.5,15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h=10, r=3.1, $fn=30);
-
-        // Material saving cutout 
-        translate(v=[-10,12,10]) cube(size = [60,42,42], center = true);
-
-        // Material saving cutout
-        translate(v=[-10,40,-30]) rotate(a=[45,0,0])  cube(size = [60,42,42], center = true);
-    }
-}
-
-// Motor shaft cutout
-module x_end_motor_shaft_cutout()
-{
-    union()
-        {
-        difference()
-            {
-            translate(v=[0,32,30]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 70, r=17, $fn=6);
-            translate(v=[-10,-17+32,30]) cube(size = [60,2,10], center = true);
-            translate(v=[-10,-8+32,-15.5+30]) rotate(a=[60,0,0]) cube(size = [60,2,10], center = true); 
-            translate(v=[-10,8+32,-15.5+30]) rotate(a=[-60,0,0]) cube(size = [60,2,10], center = true);
-            }
-            translate(v=[-30,25.2,-11.8 +30]) rotate(a=[0,90,0]) cylinder(h = 30, r=3, $fn=30);
-            translate(v=[-30,19.05,30]) rotate(a=[0,90,0]) cylinder(h = 30, r=3.5, $fn=100);
-        }
-}
-
-
-
-module selective_infill()mirror([0,1,0]) translate([-50, -33, 0.6])
-{ 
-   difference()
-    {
-        union()
-        {
-            difference()
-            {
-                translate([50,50,0.6]) rotate([0,0,90]) cylinder( h=6, r=11.7, $fn=30);//0, 17, 0.6
-                translate([50,50,-1]) rotate([0,0,90]) cylinder( h=10, r=11.5, $fn=30);
-            }
-            difference()
-            {
-                translate([50,50,0.6]) rotate([0,0,90]) cylinder( h=6, r=10.7, $fn=30); //0, 17, 0.6
-                translate([50,50,-1]) rotate([0,0,90]) cylinder( h=10, r=10.5, $fn=30);
-            } 
-            difference()
-            {
-                translate([50,50,0.6]) rotate([0,0,90]) cylinder( h=6, r=9.9, $fn=30); //0, 17, 0.6
-                translate([50,50,-1]) rotate([0,0,90]) cylinder( h=10, r=9.7, $fn=30);
-            } 
-            difference()
-            {
-                translate([50,50,0.6]) rotate([0,0,90]) cylinder( h=6, r=9, $fn=30); //0, 17, 0.6
-                translate([50,50,-1]) rotate([0,0,90]) cylinder( h=10, r=8.8, $fn=30);
-            } 
-        }
-        translate([57.5,50.5,-1]) rotate([0,0,45]) cube([8,10,9]); // front
-        translate([52,30.5,-1]) rotate([0,0,45]) cube([10,20,20]);  // front angled
-        translate([32,35.5,-1]) cube([8,30,9]); // inner horizontal
-    }
-} 
-   
- module reinforcement_selective_infill()
-{
-    rotate([90,0,-15,]) translate ([-1.5,8,26])linear_extrude(height = 0.2) polygon( points=[[-2,0],[0,12],[8,0]] ); //bearings
-    rotate([90,0,-50,]) translate ([8.5,8,1.4])linear_extrude(height = 0.2) polygon( points=[[0,0],[0,12],[8,0]] ); //body
-}
-    
-   
-// Final part
-module x_end_motor()
-{
-    difference()
-        {
-            x_end_motor_base();
-            x_end_motor_shaft_cutout();
-            x_end_motor_holes();
-            selective_infill();
-            reinforcement_selective_infill();
-            
-            // waste pocket
-            translate([-15,7,6]) rotate([90,0,0]) cylinder(h=3.5, r=5, $fn=30);   
-            translate([-15,7,51]) rotate([90,0,0]) cylinder(h=3.5, r=5, $fn=30);   
-            translate([-15,3.5,6]) rotate([90,0,0]) cylinder(h=3, r1=5, r2=4, $fn=30);   
-            translate([-15,3.5,51]) rotate([90,0,0]) cylinder(h=3, r1=5, r2=4, $fn=30); 
-          
-            // rod contact window
-            translate([-17,3,55]) cube([4,4,10]);
-            translate([-30,-30,58]) cube([30,30,10]);
-            
-            // version
-            translate([-23.2,-20,2]) rotate([90,0,270]) linear_extrude(height = 0.6) 
-            { text("R1",font = "helvetica:style=Bold", size=3, center=true); }   
-        }
-
-    translate([-15,10,6]) rotate([90,0,0]) cylinder(h=3, r=5, $fn=30);   
-    translate([-15,10,51]) rotate([90,0,0]) cylinder(h=3, r=5, $fn=30);
- 
-    // bearing stop
-    difference()
-        {
-            translate([0,0,57]) rotate([0,0,90]) cylinder( h=1, r=8, $fn=30);
-            translate([0,0,56.9]) rotate([0,0,90]) cylinder( h=0.5, r1=8, r2=7,$fn=30);    
-            translate([0,0,56.5]) rotate([0,0,90]) cylinder( h=2, r=7, $fn=30);
-            translate([-0.18,-0.5,50]) rotate([0,0,-40]) cube([12,1,10]);
-        }   
-      
-}
-
-x_end_motor();
-
-
-
-
-
-
-
-
-