From 2246cdfa6f3016e5aa794d61a85294480c01e043 Mon Sep 17 00:00:00 2001
From: Alexandr Kukan <akukan@outlook.com>
Date: Tue, 12 Feb 2019 15:05:47 +0100
Subject: [PATCH] Delete y-rod-holder.scad

---
 Printed-Parts/scad/y-rod-holder.scad | 94 ----------------------------
 1 file changed, 94 deletions(-)
 delete mode 100644 Printed-Parts/scad/y-rod-holder.scad

diff --git a/Printed-Parts/scad/y-rod-holder.scad b/Printed-Parts/scad/y-rod-holder.scad
deleted file mode 100644
index 26b7c33..0000000
--- a/Printed-Parts/scad/y-rod-holder.scad
+++ /dev/null
@@ -1,94 +0,0 @@
-// PRUSA iteration4
-// Y holder front
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-module ziptie_round_edge()
-{
-    difference()
-    {
-        translate([0,0,0]) rotate([90,0,0]) cylinder( h=3.2, r=4, $fn=50 );  
-        translate([0,1,0]) rotate([90,0,0]) cylinder( h=5, r=2, $fn=50 );  
-        translate([-10,-4,0]) cube([20,5,5]);
-        translate([-20,-4,-13]) cube([20,5,20]);
-    }
-}
-
-
-module part()    
-{
-
-    difference()
-    {
-        union()
-        {
-            // body block
-            difference() {
-                translate([-13,-3,0]) cube([26,10,12]);
-                
-                // upper corners
-                translate([4,-3.5,20]) rotate([0,60,0]) cube([20,30,20]);
-                translate([-21.2,-3.5,30]) rotate([0,120,0]) cube([20,30,20]);
-                translate([-15,-3.3,-6]) rotate([45,0,0]) cube([30,5,5]);
-                translate([15,7.3,-6]) rotate([45,0,180]) cube([30,5,5]);
-            }
-            difference() {
-            translate([-4,2,-2]) cube([8,5,3]);
-                
-             // upper corners   
-            translate([-15,2,-7.07]) rotate([45,0,0]) cube([30,5,5]); 
-            translate([15,9.5,-6]) rotate([45,0,180]) cube([30,5,5]);  
-            }
-        }
-
-        // y-axis cut
-        translate([0,11,10.5]) rotate([90,0,0]) cylinder( h=14, r=4, $fn=50 );
-       translate([0,8,10.5]) rotate([90,0,0]) cylinder( h=2, r1=4.5, r2=4, $fn=50 );
-        translate([0,-2,10.5]) rotate([90,0,0]) cylinder( h=2, r1=4, r2=4.5, $fn=50 );
-        translate([-7,-4,14.5]) rotate([0,45,0]) cube([10,20,10]);
-        translate([0,8,10.5]) rotate([90,0,0]) cylinder( h=1.4, r1=5, r2=4, $fn=50 );
-
-        // screw holes
-        translate([-5.5,4,3.5]) rotate([90,0,0]) cylinder( h=20, r=1.55, $fn=60 );
-        translate([5.5,4,3.5]) rotate([90,0,0]) cylinder( h=20, r=1.55, $fn=60 );
-        translate([-5.5,-2.4,3.5]) rotate([90,0,0]) cylinder( h=2, r1=1.5, r2=2.6, $fn=60 );
-        translate([5.5,-2.4,3.5]) rotate([90,0,0]) cylinder( h=2, r1=1.5, r2=2.6, $fn=60 );
-
-        
-        // ziptie
-        translate([7.8,5.75,9]) ziptie_round_edge();
-        translate([-7.8,2.55,9]) rotate([0,0,180]) ziptie_round_edge();
-        translate([-8.1,2.55,5]) cube([16.2,3.2,2]);
-        translate([0.8,2.55,25]) rotate([0,60,0]) cube([20,3.2,2]);
-        translate([-1.8,2.55,27]) rotate([0,120,0]) cube([20,3.2,2]);
-
-
-        // nuts
-        difference () {
-         union(){
-        translate([-8.2,-0.45,-3.4]) cube([5.6,2.1,10]);
-        translate([2.8,-0.45,-3.4]) cube([5.6,2.1,10]);}
-        
-        // nut holding '
-        translate([-14,-0.45,-0.02]) cube([24,0.5,0.5]);
-        
-        }
-        // nut print supports
-        translate([-8.2,-0.25,3.5-3.2/2]) cube([5.6,2.1,3.2]);
-        translate([2.8,-0.25,3.5-3.2/2]) cube([5.6,2.1,3.2]);
-        translate([-7.1,0,3.5-3.2/2]) cube([3.2,2.1,3.2]);
-        translate([3.9,0,3.5-3.2/2]) cube([3.2,2.1,3.2]);
-
-
-        // upper corners
-        
-
-    }
-}
-
-
-rotate([90,0,0])part();
-
-