diff --git a/Printed-Parts/scad/Heatbed-cable-clip_8mm.scad b/Printed-Parts/scad/Heatbed-cable-clip_8mm.scad
deleted file mode 100644
index f97252a..0000000
--- a/Printed-Parts/scad/Heatbed-cable-clip_8mm.scad
+++ /dev/null
@@ -1,83 +0,0 @@
-// PRUSA iteration4
-// Heatbed cable clip
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-
- module heatbed_cable_clip()
-{
-    
-difference()
-{    
-    
-    union()
-    {
-        difference()
-        {
-            union()
-            {
-                // body base
-                translate([75,99,28]) rotate([90,0,0]) cylinder( h = 15, r = 13, $fn=30); 
-                translate([75,101,28]) rotate([90,0,0]) cylinder( h = 2, r1=9,r2 = 13, $fn=30); 
-                
-            }
-
-             
-           
-            
-            // cut flat and shape
-            translate([60,82,14]) cube([30,20,14]);  
-            translate([60,72,20]) cube([30,20,30]); 
-        }
-         
-        
-        difference() {
-        translate([62.75,84,28]) cube([24.5,8,7]);
-        difference () {
-        translate([75,85,28]) rotate([90,0,0]) cube([30,20,10], center = true);    
-        translate([75,90,28]) rotate([90,0,0]) cylinder(h=6,r1=16.5,r2=11,$fn=30);   
-           
-        } 
-    }}
-    
-    // cable opening
-    translate([61,102,28]) rotate([35,90,0])
-    
-    difference (){
-   
-    cylinder(h=35,r=5,$fn=30);
-       
-    
-    //translate([0,0,3]) cylinder(h=5,r=5,$fn=30);
-    translate([0,0,12]) cylinder(h=1,r=5,$fn=30); 
-    translate([0,0,16]) cylinder(h=1,r=5,$fn=30); 
-    translate([0,0,20]) cylinder(h=1,r=5,$fn=30);
-   
-    }
-     translate([61,102,28]) rotate([35,90,0]) cylinder(h=35,r=4.3,$fn=30);
-    
-  
-    
-    // screw heads
-    translate([67,88.8,30.5]) rotate([0,0,0]) cylinder(h=10,r=3.2,$fn=30); 
-    translate([83,96,31]) rotate([0,0,0]) cylinder(h=10,r=3.2,$fn=30); 
-    
-    
-    // screws
-            translate([67,88.8,14]) rotate([0,0,0]) cylinder(h=35,r=1.6,$fn=50); 
-            translate([83,96,14]) rotate([0,0,0]) cylinder(h=35,r=1.6,$fn=50);
-    
-
-    
-    
-    
-}
-
-
-    
-
-} 
-
-translate([-70,-110,0]) heatbed_cable_clip();