diff --git a/Printed-Parts/scad/extruder-idler.scad b/Printed-Parts/scad/extruder-idler.scad
deleted file mode 100755
index 9b3e8f4..0000000
--- a/Printed-Parts/scad/extruder-idler.scad
+++ /dev/null
@@ -1,78 +0,0 @@
-
-
-module part_body(){
-    
-    //bottom round edge
-    translate([ -7, 4, 6 ]) rotate([0,90,0]) cylinder(r=4, h=21.5, $fn=200 );
-    translate([ -7, 4, 4 ]) rotate([0,90,0]) cylinder(r=4, h=21.5, $fn=200 );
-
-    translate([ 11, 8, 4 ])  cube([3.5,4,6]);
-    
-    difference()
-    {
-        translate([ -7, 0, 4 ])  cube([21.5,5,6]);
-        translate([ -8, -1, 8 ])  rotate([45,0,0]) cube([25,5,6]);
-    }
-    
-    translate([ -7, 8, 4 ]) rotate([0,90,0]) cylinder(r=4, h=21.5, $fn=200 );
-
-    translate([ 11, 0, 4]) cube([3.5,12,2]);
-    
-    translate([ 11, 4, 8]) cube([3.5,4,2]);
-    translate([ 11, 4, 0]) cube([3.5,4,2]);
-    
-
-    // body
-    translate([ -7, 4, 0 ]) cube([18,10,10]);
-    translate([ -7, 0, 4 ]) cube([18,32,2]);
-    translate([ -5, 4, 3 ]) cube([10,48,7]);
-    translate([ -11, 11, 0 ]) cube([22,28,10]);
-    translate([ -9, 11, 0 ]) cube([18,30,10]);
-
-    // upper round edges    
-    translate([ 9, 39, 0 ]) cylinder(r=2, h=10, $fn=25);
-    translate([ -9, 39, 0 ]) cylinder(r=2, h=10, $fn=25);
-        
-    // upper round piece
-    translate([ 0, 52, 6.5 ]) rotate([0,0,0]) cylinder(r=5, h=7, $fn=200, center=true);
-    }    
-
-module cut_away(){
-
-    // axis
-    translate([ 0, 4, 6 ]) rotate([0,90,0]) cylinder(r=1.7, h=30, $fn=200, center=true); 
-
-    // bolt holes
-    translate([ 7.5, 35.8, -1 ]) cylinder(r=1.75, h=12, $fn=20);
-    translate([ 7.5, 36.5, -1 ]) cylinder(r=1.75, h=12, $fn=20);
-    translate([ 7.5, 37.2, -1 ]) cylinder(r=1.75, h=12, $fn=20);
-
-    translate([ -7.5, 35.8, -1 ])cylinder(r=1.75, h=12, $fn=20);
-    translate([ -7.5, 36.5, -1 ])cylinder(r=1.75, h=12, $fn=20);
-    translate([ -7.5, 37.2, -1 ])cylinder(r=1.75, h=12, $fn=20);
-    
-    translate([0,52,0]) sphere(r=5, $fn=20);
-    
-    //bearing hole
-    translate([ 0, 20, 3 ]){
-        rotate([0,90,0]){
-            cylinder(r=8.5, h=7.5, $fn=200, center=true);
-            %cylinder(r=8, h=7.5, $fn=200, center=true);
-            cylinder(r=2.5, h=17, $fn=200, center=true);
-            }
-        translate([0,0,-5]) cube([17,5,10], center=true);
-        translate([0,0,-5]) cube([7.5,17,10], center=true);
-    }
-}
-
-module idler(){
-    
-    // final part
-    translate([0,0,10]) mirror([0,0,1])
-    difference(){
-        part_body();
-        cut_away();
-    }    
-}
-    
-idler();
\ No newline at end of file