diff --git a/Printed-Parts/scad/heatbed-cable-cover.scad b/Printed-Parts/scad/heatbed-cable-cover.scad
index 796b7c0..89594b4 100644
--- a/Printed-Parts/scad/heatbed-cable-cover.scad
+++ b/Printed-Parts/scad/heatbed-cable-cover.scad
@@ -1,54 +1,78 @@
 // PRUSA iteration4
-// Heatbed cover
+// Heatbed cover MK2.5
 // GNU GPL v3
 // Josef Průša <iam@josefprusa.cz> and contributors
 // http://www.reprap.org/wiki/Prusa_Mendel
 // http://prusamendel.org
 
-
-
 module cover()
 {
+    
+    
     difference()
     {
+        
+        
+
         // base block
-        translate([-18,0,0]) cube([36,32,8.6]);
+        translate([-18,0,0]) cube([36,36,9]);
         
         // inner cut
-        translate([-15,-0.5,-3]) cube([30,16.5,9]);
-        translate([-0,33,3]) rotate([90,0,0]) cylinder(h = 15, r=4, $fn=60);    
-        translate([-15,15,-6]) cube([30,19,9]);
+        translate([-15,-0.5,-3]) cube([30,16,9]);
+        translate([-0,37,3]) rotate([90,0,0]) cylinder(h = 15, r=4, $fn=60);    
+        translate([-15,15,-6]) cube([30,22,9]);
 
         // inner edges
-        translate([-4,4.5,0]) rotate([0,0,45])  cube([15,15,6]);
-        translate([4.0,4.51,0]) rotate([0,0,45])  cube([15,15,6]);
+        translate([3.5,2,0]) rotate([0,0,0])  cube([10.5,15,6]);
+        translate([-14,2,0]) rotate([0,0,0])  cube([10.5,15,6]);
+        
+        translate([2.5,15,0]) rotate([0,0,0])  cube([8,8,6]);
+        translate([-10.5,15,0]) rotate([0,0,0])  cube([8,8,6]);
+        
+        translate([6.96,19.45,0]) rotate([0,0,45])  cube([5,10,6]);
+        translate([-6.96,19.45,0]) rotate([0,0,45])  cube([10,5,6]);
+        
+        translate([3.96,18.45,0]) rotate([0,0,20])  cube([5,6,6]);
+        translate([-3.96,18.45,0]) rotate([0,0,70])  cube([6,5,6]);
+        
+        
+        translate([-0,36,3]) rotate([90,0,0]) cylinder(h = 21, r=4, $fn=60);
+        
+        translate([2,14,-1]) rotate([0,0,10])  cube([8,13,6]);
+        translate([-9.88,15.21,-1]) rotate([0,0,-10])  cube([8,13,6]);
         
         // outer edges
-        translate([-18.0,25,-1]) rotate([0,0,45])  cube([11,11,10]);
-        translate([18,25,-1]) rotate([0,0,45])  cube([11,11,10]);
+        translate([-18.0,32,-1]) rotate([0,0,25])  cube([11,11,11]);
+        translate([18,32,-1]) rotate([0,0,65])  cube([11,11,11]);
 
         // screw holes for clip
-        translate([-10,25,0]) cylinder(h = 10, r=1.6, $fn=50);    
-        translate([10,25,0]) cylinder(h = 10, r=1.6, $fn=50);    
+        translate([-11,30,0]) cylinder(h = 10, r=1.6, $fn=50);    
+        translate([11,30,0]) cylinder(h = 10, r=1.6, $fn=50);    
 
 
         // clip nuts entry
-        translate([-10,25,8]) cylinder(h = 4, r1=3.15, r2=5, $fn=6);    
-        translate([10,25,8]) cylinder(h = 4, r1=3.15, r2=5, $fn=6);    
+        translate([-11,30,8]) rotate([0,0,30]) cylinder(h = 4, r1=3.15, r2=5, $fn=6);    
+        translate([11,30,8]) rotate([0,0,-30]) cylinder(h = 4, r1=3.15, r2=5, $fn=6); 
+     
+        // heatbed terminal screw pockets
+    
+        translate([8.5,7.5,0]) cylinder(h = 8.6, r=3.25, $fn=50);    
+        translate([-8.5,7.5,0]) cylinder(h = 8.6, r=3.25, $fn=50); 
+
 
         // clip nuts with print supports
         difference()
         {
         union()
             {
-                translate([-10,25,5.4]) cylinder(h = 4, r=3.15, $fn=6);    
-                translate([10,25,5.4]) cylinder(h = 4, r=3.15, $fn=6);    
+                translate([-11,30,5.4]) rotate([0,0,30]) cylinder(h = 4, r=3.15, $fn=6);    
+                translate([11,30,5.4])  rotate([0,0,-30]) cylinder(h = 4, r=3.15, $fn=6);    
             }
-            translate([-8.4,0,0]) cube([16.8,40,5.7]);
-            translate([-16.6,0,0]) cube([5,40,5.7]);
-            translate([11.6,0,0]) cube([5,40,5.7]);
-            translate([-20,13.4,0]) cube([70,10,6]);
-            translate([-20,26.6,0]) cube([70,10,6]);
+            translate([-9.4,4,0]) cube([18.8,40,5.7]);
+            translate([-17.6,4,0]) cube([5,40,5.7]);
+            translate([12.6,4,0]) cube([5,40,5.7]);
+            translate([-22,18.4,0]) cube([70,10,6]);
+            translate([-20,31.6,0]) cube([70,10,6]);
         
         }
           
@@ -56,7 +80,7 @@ module cover()
         {
         union()
             {
-                translate([0,7.5,5.7]) cylinder(h = 4, r=3.15, $fn=6);    
+                translate([0,7.5,5.7]) cylinder(h = 4, r=3.15, $fn=60);    
             }
             translate([-11.6,0,0.9]) cube([10,40,5.7]);
             translate([1.6,0,0.9]) cube([10,40,5.7]);
@@ -65,7 +89,7 @@ module cover()
         }
 
     // heatbed screw    
-    translate([0,7.5,8]) cylinder(h = 4, r1=3.15, r2=5, $fn=6);    
+    translate([0,7.5,8]) cylinder(h = 4, r1=2.75, r2=5, $fn=50);    
     translate([0,7.5,3]) cylinder(h = 4, r=1.6, $fn=50);    
 
     // LED window
@@ -75,10 +99,9 @@ module cover()
 
     // edges
     translate([-20,-0,6.5]) rotate([45,0,0]) cube([40,5,5]);
-    translate([-23,-1,8.5]) rotate([0,45,0]) cube([5,45,6]);
-    translate([15.8,-1,8.7]) rotate([0,45,0]) cube([6,45,5]);
-    translate([30,12,8.7]) rotate([0,45,45]) cube([6,45,5]);
-    translate([-40.6,12,9.7]) rotate([0,45,-45]) cube([6,45,5]);
+    translate([-23.3,-1,9.7]) rotate([0,45,0]) cube([6,45,6]);
+    translate([14.8,-1,9.7]) rotate([0,45,0]) cube([6,45,5]);
+    
 }
 
     // heatbed pcb support
@@ -91,76 +114,76 @@ module cover()
     // heatbed screw body
     difference()
     {
-        translate([0,7.5,4]) cylinder(h = 4, r=5, $fn=6);    
-        translate([0,7.5,6.3]) cylinder(h = 4, r=3.15, $fn=6);    
+        
+       
+        translate([0,7.5,4]) rotate(90, v = [0,0,1]) cylinder(h = 4, r=2.75, $fn=50);   
+        translate([0,7.5,6.3]) cylinder(h = 4, r=2.76, $fn=50);    
         translate([0,7.5,3]) cylinder(h = 4, r=1.6, $fn=50);    
     }
 
-    // filament holder
-    difference()
-    {
-        translate([-3.5,15,2]) cube([7,7,6]);    
-        translate([-0,28,4.5]) rotate([90,0,0]) cylinder(h = 15, r=1.5, $fn=60);    
-        translate([-10.2,11,2]) rotate([0,45,0]) cube([7,12,6]);    
-        translate([1.95,11,2]) rotate([0,45,0]) cube([7,12,6]);    
-    }
+
 }
 
-
-
-
-
 module clip()
 {
     
     difference()
     {
         // base body
-        translate([-15,15.5,-3]) cube([30,16.5,6]);    
+        translate([-15,15.5,-3]) cube([30,20.5,6]); 
+        
+        // inner angled cut
+        translate([3.5,2,0]) rotate([0,0,0])  cube([10.5,15,6]);
+        translate([-14,2,0]) rotate([0,0,0])  cube([10.5,15,6]);
+        
+        translate([3.5,15,0]) rotate([0,0,0])  cube([7,8,6]);
+        translate([-10.5,15,0]) rotate([0,0,0])  cube([7,8,6]);
+       
+        translate([6.96,19.45,1]) rotate([0,0,45])  cube([5,10,6]);
+        translate([-6.96,19.45,1]) rotate([0,0,45])  cube([10,5,6]); 
+        
+        translate([-0,37,3]) rotate([90,0,0]) cylinder(h = 17, r=3.5, $fn=60);
+            
+        translate([-7,15,0]) rotate([0,0,0])  cube([14,11,6]);
+       
+        translate([3,14,1]) rotate([0,0,10])  cube([7,13,6]);
+        translate([-9.88,15.21,1]) rotate([0,0,-10])  cube([7,13,6]); 
         
         // cables cut
-        translate([-0,33,3]) rotate([90,0,0]) cylinder(h = 15, r=4, $fn=60); 
+        translate([-0,36,3]) rotate([90,0,0]) cylinder(h = 187, r=4, $fn=60); 
     
         // screws
-        translate([-10,25,-3]) cylinder(h = 10, r=1.6, $fn=50);    
-        translate([10,25,-3]) cylinder(h = 10, r=1.6, $fn=50);
-        translate([-10,25,-5.5]) cylinder(h = 3, r2=3.1, r1=5, $fn=50);    
-        translate([10,25,-5.5]) cylinder(h = 3, r2=3.1, r1=5,$fn=50);
+        translate([-11,30,-3]) cylinder(h = 10, r=1.6, $fn=50);    
+        translate([11,30,-3]) cylinder(h = 10, r=1.6, $fn=50);
+        translate([-11,30,-5.5]) cylinder(h = 3, r2=3.1, r1=5, $fn=50);    
+        translate([11,30,-5.5]) cylinder(h = 3, r2=3.1, r1=5,$fn=50);
        
     // print support for nut heads    
     difference()
     {
         union()
         {
-            translate([-10,25,-3.5]) cylinder(h = 3, r=3.1, $fn=50);    
-            translate([10,25,-3.5]) cylinder(h = 3, r=3.1, $fn=50);
+            translate([-11,30,-3.5]) cylinder(h = 3, r=3.1, $fn=50);    
+            translate([11,30,-3.5]) cylinder(h = 3, r=3.1, $fn=50);
         }
-        translate([-30,13.4,-0.8]) cube([60,10,2]);
-        translate([-30,26.6,-0.8]) cube([60,10,2]);
-        translate([-8.4,20,-1.1]) cube([16.8,10,2]);
-        translate([-21.6,20,-1.1]) cube([10,10,2]);
-        translate([11.6,20,-1.1]) cube([10,10,2]);
+        translate([-30,18.4,-0.8]) cube([60,10,2]);
+        translate([-30,31.6,-0.8]) cube([60,10,2]);
+        translate([-9.4,25,-1.1]) cube([18.8,10,2]);
+        translate([-22.6,25,-1.1]) cube([10,10,2]);
+        translate([12.6,25,-1.1]) cube([10,10,2]);
     }    
     
     // thermistor cable entry
     translate([-0,22,4]) rotate([115,0,0]) cylinder(h = 15, r=3, $fn=60);     
     
     
-    // edges    
-    translate([-18.0,25,-5]) rotate([0,0,45])  cube([11,11,15]);
-    translate([18,25,-5]) rotate([0,0,45])  cube([11,11,15]);
+    // edges  
+  
+        translate([-18.0,32,-5]) rotate([0,0,25])  cube([11,11,15]);
+        translate([18,32,-5]) rotate([0,0,65])  cube([11,11,15]);
 
-    // inner angled cut
-        difference()
-        {
-            translate([-15,15,0]) cube([30,11,4]);
-            translate([-14.5,14.5,-1]) rotate([0,0,45])  cube([17,17,6]);
-            translate([14.5,14.5,-1]) rotate([0,0,45])  cube([17,17,6]);
-                
-            translate([-13,11,-1]) rotate([-45,0,45])  cube([20,20,6]);
-            translate([13,11,-1]) rotate([0,45,45])  cube([20,20,6]);
-            translate([-10,16,-10]) rotate([30,0,0])  cube([20,20,6]);
-        }
+
+    
         
     }
     
@@ -169,23 +192,32 @@ module clip()
     {
         difference()
         {
-            translate([-0,32,3]) rotate([90,0,0]) cylinder(h = 7, r=4.5, $fn=60); 
-            translate([-0,34,3]) rotate([90,0,0]) cylinder(h = 17, r=3.5, $fn=60); 
+            translate([-0,36,3]) rotate([90,0,0]) cylinder(h = 10, r=4.5, $fn=60); 
+            translate([-0,37,3]) rotate([90,0,0]) cylinder(h = 17, r=3.5, $fn=60);
+            
         }
-        translate([-15,17,3]) cube([30,20,6]);    
-        translate([-15,26,-5]) cube([30,2,16]);    
-        translate([-15,29,-5]) cube([30,2,16]);    
+        translate([-15,18,3]) cube([30,20,6]);    
+        translate([-15,27,-5]) cube([30,2,16]);    
+        translate([-15,30,-5]) cube([30,2,16]);    
+        translate([-15,33,-5]) cube([30,2,16]); 
+        translate([6.96,19.45,1]) rotate([0,0,45])  cube([5,10,6]);
+        translate([-6.96,19.45,1]) rotate([0,0,45])  cube([10,5,6]); 
+        translate([-4,20,0]) rotate([0,0,0])  cube([8,11,6]); 
+        
         
         
     }
+       
 }
 
- 
-translate([0,0,8.6]) rotate([0,180,0])
-{
-translate([0,20,5.6]) rotate([0,180,0]) clip();
+
+  
+
+translate([0,40,3]) 
+clip();
+
+translate([0,40,9]) rotate([180,0,0]) 
 cover();
-}