Cleanup

Printed-Parts/scad/coupling.scad

@@ -1,8 +0,0 @@
-center=6;
-line=0.65;
-dia = (center+6*line)/2;
-difference(){
-cylinder(r=dia, h=30, $fn=65);
-translate([0,0,-1])cylinder(r=center/2, h=32, $fn=65);
-translate([0.5,0.5,-1])cube([10,10,40]);
-}

Printed-Parts/scad/rambo-mini-cover-back.scad

@@ -1,14 +0,0 @@
-difference(){
-union(){
-cube([106,55,1]);
-translate([0,5.5,0])cube([10,55-9,9]);
-translate([96,5.5,0])cube([10,55-9,9]);
-}
-
-translate([76,0,-1])cube([30,5.5,10]);
-translate([0,15,2])cube([110,28,10]);
-translate([5,96,6.5]) rotate([90,0,0]) cylinder(r=1.4, h=100,$fn=10);
-translate([6,96,6.5]) rotate([90,0,0]) cylinder(r=1.4, h=100,$fn=10);
-translate([106-4,96,6.5]) rotate([90,0,0]) cylinder(r=1.4, h=100,$fn=10);
-translate([106-5,96,6.5]) rotate([90,0,0]) cylinder(r=1.4, h=100,$fn=10);
-}

Printed-Parts/scad/rambo-mini-cover-left.scad

@@ -1,59 +0,0 @@
-difference(){
-union(){
-cube([106,72+14,1.5]);
-translate([0,0,0])cube([10,72+14,4]);
-translate([96,0,0])cube([10,72+14,4]);
-}
-
-
-// Vzdalenos der 61mm a 95mm
-	translate([5.5,5.5,-1]){
-	translate([0,61+14,0])cylinder(r=2, h=6);
-	translate([95,61+14,0])cylinder(r=2, h=6);
-	}
-	
-	translate([-8+34,0,0])cube([8,9,6]);
-	translate([-8+114-5.5,0,0])cube([8,10,6]);
-	translate([-8+114+2,2,0])rotate([0,0,45])cube([8,10,6]);
-	
-	translate([80,40,0])cube([10,18,6]);
-	
-	translate([92,40,0])cube([4,3,6]);
-	translate([92,55,0])cube([4,3,6]);
-
-
-	translate([10,60,0])cube([18,10,6]);
-	translate([10,72,0])cube([3,4,6]);
-	translate([25,72,0])cube([3,4,6]);
-}
-
-difference(){
-union(){
-translate([0,-4,0])cube([106,4,4]);
-translate([-8+34,-4,0])cube([8,4,6]);
-translate([-8+114-5.5,-4,0])cube([8,4,6]);
-}
-
-translate([-4,0,0]){
-translate([0+34,0,3]) rotate([90,0,0]) cylinder(r=1.6, h=6, $fn=20);
-translate([0+34-0.7,0,3]) rotate([90,0,0]) cylinder(r=1.6, h=6, $fn=20);
-translate([114-5.5,0,3]) rotate([90,0,0]) cylinder(r=1.6, h=6, $fn=20);
-translate([114-5.5+0.7,0,3]) rotate([90,0,0]) cylinder(r=1.6, h=6, $fn=20);
-}
-translate([-8,-4,-5]) rotate([45,0,0]) cube([122,4,4]);
-}
-
-module rambo_mini(){
-difference(){
-// Velikost pcb 106 a 72
-cube([106,72,1]);
-
-	// Vzdalenos der 61mm a 95mm
-	translate([5.5,5.5,-1]){
-	translate([0,0,0])cylinder(r=1.4, h=3);
-	translate([0,61,0])cylinder(r=1.4, h=3);
-	translate([95,0,0])cylinder(r=1.4, h=3);
-	translate([95,61,0])cylinder(r=1.4, h=3);
-	}
-}
-}

Printed-Parts/scad/rambo-mini-cover-right.scad

@@ -1,48 +0,0 @@
-difference(){
-union(){
-cube([106,72,1]);
-translate([0,0,0])cube([10,10,4]);
-translate([0,62,0])cube([10,10,4]);
-translate([96,0,0])cube([10,10,4]);
-translate([96,62,0])cube([10,10,4]);
-}
-
-
-// Vzdalenos der 61mm a 95mm
-	translate([5.5,5.5,-1]){
-	translate([0,0,0])cylinder(r=2, h=6);
-	translate([0,61,0])cylinder(r=2, h=6);
-	translate([95,0,0])cylinder(r=2, h=6);
-	translate([95,61,0])cylinder(r=2, h=6);
-	}
-}
-
-difference(){
-union(){
-translate([-8,-4,0])cube([122,4,4]);
-translate([-8,-4,0])cube([8,4,6]);
-translate([-8+114,-4,0])cube([8,4,6]);
-}
-
-translate([-4,0,0]){
-translate([0,0,3]) rotate([90,0,0]) cylinder(r=1.4, h=6);
-translate([114,0,3]) rotate([90,0,0]) cylinder(r=1.4, h=6);
-}
-translate([35,-4,-1]) cube([30,4,7]);
-translate([-8,-4,-5]) rotate([45,0,0]) cube([122,4,4]);
-}
-
-module rambo_mini(){
-difference(){
-// Velikost pcb 106 a 72
-cube([106,72,1]);
-
-	// Vzdalenos der 61mm a 95mm
-	translate([5.5,5.5,-1]){
-	translate([0,0,0])cylinder(r=1.4, h=3);
-	translate([0,61,0])cylinder(r=1.4, h=3);
-	translate([95,0,0])cylinder(r=1.4, h=3);
-	translate([95,61,0])cylinder(r=1.4, h=3);
-	}
-}
-}

Printed-Parts/scad/z-adjuster.scad

@@ -1,15 +0,0 @@
-difference(){
-union(){
-	cylinder(r1=9.7, r2=10, h=1, $fn=100);
-	translate([0,0,1]) cylinder(r1=10, r2=10, h=2.5, $fn=100);
-	translate([0,0,3.5])cylinder(r1=10, r2=9, h=1, $fn=100);
-}
-
-translate([0,0,0.5]) cylinder(r=3.3, h=5, $fn=6);
-translate([0,0,-0.5]) cylinder(r=1.8, h=5, $fn=20);
-
-for (i = [0:1:12]) {
-	rotate([0,0,i*30]) translate([0,11.7,0]) rotate([0,0,45]) cylinder(r=2, h=5, $fn=30);
-}
-
-}

Printed-Parts/scad/z-endstop-holder.scad

@@ -1,15 +0,0 @@
-height = 42;
-
-difference(){
-union(){
-cylinder(r=10.5, h=height, $fn=100);
-translate([-10.5,0,0])cube([21,10.5,height]);
-translate([-10.5,0,0])cube([21,11,height-8]);
-}
-translate([0,-0.5,0.5])cube([20,1,45]);
-rotate([0,0,-90]) translate([0,-0.5,0.5])cube([8,1,45]);
-rotate([0,0,-180]) translate([0,-0.5,0.5])cube([8,1,45]);
-translate([0,0,-1])cylinder(r=4, h=height+2, $fn=100);
-translate([4.75,2,height-6]) rotate([-90,0,0])cylinder(r=1, h=100,$fn=20);
-translate([-4.75,2,height-6]) rotate([-90,0,0])cylinder(r=1, h=100,$fn=20);
-}