diff --git a/Printed-Parts/scad/y-motor.scad b/Printed-Parts/scad/y-motor.scad
deleted file mode 100755
index 4e81fad..0000000
--- a/Printed-Parts/scad/y-motor.scad
+++ /dev/null
@@ -1,100 +0,0 @@
-// PRUSA iteration3
-// Y motor mount
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-//include <configuration.scad>
-
-module y_motor_base(){
-    
-    union()
-    {
-    // Motor holding part
-    translate(v = [29,-21+50,0]){
-        
-    difference()
-    {    
-     union()
-    {
-    translate(v = [-21+4.5,0,5]) cube(size = [9,31,10], center=true);
-    translate(v = [-15.5,-15.5,0]) cylinder(h = 10, r=5.5, $fn=50);
-    translate(v = [-15.5,+15.5,0]) cylinder(h = 10, r=5.5, $fn=50);
-    translate([-21,7,0]) rotate([0,0,45]) cube([2, 2, 10]);    
-
-    //end stop
-    translate(v = [-10.5,+15.5,0]) cylinder(h = 10, r=5.5, $fn=50);
-    translate([-12,0,0]) cube([7, 15, 10]);
-    translate([-16,16,0]) cube([6, 5, 10]);
-    translate([-21+6,8,0]) cube([12-2, 5, 28]);    
-    translate([-21,8-5,0]) cube([8, 10, 28]);      
-    translate([-21+9.5-2,7,0]) rotate([0,0,45]) cube([2, 2, 28]);    
-    // Joins motor holder and rod plate
-    translate(v = [-29,-21,0]) cube(size = [14,30,10]);
-    }    
-        //selective infill
-        translate([-14.5,5,0.3]) cube([0.1,5.5,27]);
-        translate([-16.5,5,0.3]) cube([0.1,5.5,27]);
-        translate([-18.5,5,0.3]) cube([0.1,5.5,25]);
-        translate([-10,9,1]) cube([0.1,3,26.3]);
-        translate([-8,9,6]) cube([0.1,3,21.3]);
-        
-    }
-}
-}
-     // Front holding part
-     translate(v = [0,10,0]) cylinder(h = 10, r=8, $fn=80);
-     translate(v = [0,20,5])cube(size = [16,20,10], center=true);	
-     translate(v = [0,30,0])cylinder(h = 10, r=8, $fn=80);
-}
-
-module y_motor_holes(){
-    translate(v = [29,-21+50,0]){
-    // Screw head holes
-    translate(v = [-15.5,-15.5,-1]) cylinder(h = 10, r=1.8, $fn=20);
-    translate(v = [-15.5,+15.5,-1]) cylinder(h = 10, r=1.8, $fn=20);
-    // Screw holes
-    translate(v = [-15.5,-15.5,7]) cylinder(h = 7, r=3.5, $fn=30);
-    translate(v = [-15.5,+15.5,7]) cylinder(h = 25, r=3.5, $fn=30);
- }
-    translate(v = [0,10,-1]) cylinder(h = 12, r=4.2, $fn=50);	
-    translate(v = [0,30,-1]) cylinder(h = 12, r=4.2, $fn=50);
- 
-    //endstop
-    translate([25,29,0])  cylinder(h = 29, r=8, $fn=20); 
-   
-    translate([18,45,15]) rotate([90,0,0]) cylinder(h = 10, r=0.8, $fn=20);
-    translate([18,42.2,15]) rotate([90,0,0]) cylinder(h = 2, r1=1.2, r2=0.8, $fn=20);
- 
-    translate([18,45,24.5]) rotate([90,0,0]) cylinder(h = 10, r=0.8, $fn=20);
-    translate([18,42.2,24.5]) rotate([90,0,0]) cylinder(h = 2, r1=1.2, r2=0.8, $fn=20);
-   
-    // endstop corner cutout
-    translate([-10,30,28]) rotate([0,45,0]) cube([15, 19, 15]);	
-    translate([-1,41,10])  cube([15, 5, 19]);	
-    translate([27,33,0]) rotate([0,0,45]) cube([5, 5, 28]);	
-    translate([7,28,10.01]) rotate([0,0,45]) cube([5, 5, 28]); 
-    
-    translate([19,32,0]) rotate([0,30,0]) cube([8, 20, 18]);	
-    translate([24.5-2,32,17]) rotate([0,45,0]) cube([2, 20, 2]);	
-    
-    translate([23-2,32,29]) rotate([0,45,0]) cube([5, 20, 5]);	
-}
-
-
-
-
-
-// Final part
-module y_motor(){
-    difference()
-    {
-        y_motor_base();
-        y_motor_holes();
-    }
-}
-
-
-y_motor();
-