From 4ecca74ce7ecc243068081a0aed11faab2c9c6a9 Mon Sep 17 00:00:00 2001 From: Alexandr Kukan Date: Tue, 12 Feb 2019 15:04:55 +0100 Subject: [PATCH] Delete x-carriage.scad --- Printed-Parts/scad/x-carriage.scad | 381 ----------------------------- 1 file changed, 381 deletions(-) delete mode 100644 Printed-Parts/scad/x-carriage.scad diff --git a/Printed-Parts/scad/x-carriage.scad b/Printed-Parts/scad/x-carriage.scad deleted file mode 100644 index 5b63234..0000000 --- a/Printed-Parts/scad/x-carriage.scad +++ /dev/null @@ -1,381 +0,0 @@ -// PRUSA iteration4 -// X carriage -// GNU GPL v3 -// Josef Průša and contributors -// http://www.reprap.org/wiki/Prusa_Mendel -// http://prusamendel.org - -use - -module belt_cut() -{ - rotate([0,0,180]) - { - translate([-20,0,0]) cube([39,0.75,15]); - translate([-20,0,5]) rotate([-7,0,0]) cube([39,0.75,10]); - translate([-20,0,5]) rotate([10,0,0]) cube([39,0.75,10]); - for (_step =[-20:2:18]) - { - translate([_step,0.5,0]) cube([1,1.0,10]); - } - for (_step =[-20:2:18]) - { - translate([_step,0.5,5]) rotate([-7,0,0]) cube([1,1,10]); - } - } -} - - -module x_carriage_base() -{ - - // Small bearing holder - translate([-33/2,0,0]) rotate([0,0,90]) horizontal_bearing_base(1); - - // Long bearing holder - translate([-33/2,45,0]) rotate([0,0,90]) horizontal_bearing_base(2); - - // Base plate - translate([-34,-14,0]) cube([34.5,70.5,7]); - translate([-33,-15,0]) cube([33,7,15]); - translate([-42.5,53.0,0]) cube([52,6.5,15]); - - difference() - { - union() - { - translate([-12,30,1]) rotate([0,0,45]) cube([6,6,14]); - translate([-20,30,1]) rotate([0,0,45]) cube([6,6,14]); - } - translate([-25,38,11]) rotate([43,0,0]) cube([20,8,8]); - } - - // upper motor screw block - translate([-23,56.8,0]) rotate([0,0,0]) cube([32.5,18.2,8]); - - // Belt holder base - translate([-42.5,20,0]) cube([52,16,7]); - - // new belt holder base block - translate([-42.5,18,7]) cube([52,16.3,8]); - -} - - - -module x_carriage_holes() -{ - // Small bearing holder holes cutter - translate([-33/2,0,0]) rotate([0,0,90]) horizontal_bearing_holes_nozip(1); - - // Long bearing holder holes cutter - translate([-33/2,45,0]) rotate([0,0,90]) horizontal_bearing_holes_nozip(2); - - // upper ziptie right - translate([2,0,0]) - difference() - { - translate([0.75,45,12]) rotate([0,90,0]) cylinder(r=10.8, h=3.5, $fn=25); - translate([0,45,12]) rotate([0,90,0]) cylinder(r=9, h=6, $fn=25); - } - - // upper ziptie left - translate([-38,0,0]) - difference() - { - translate([0.75,45,12]) rotate([0,90,0]) cylinder(r=10.8,h=3.5,$fn=25); - translate([0,45,12]) rotate([0,90,0]) cylinder(r=9, h=6, $fn=25); - } - - // upper ziptie head - translate([0,52.5,12]) cube([10,10,5]); - translate([-45,52.5,12]) cube([13.5,10,5]); - - // Extruder mounting holes - translate([-17.5+12,24.5,-1])cylinder(r=1.65, h=20, $fn=25); - translate([-17.5+12,24.5,-0.1])cylinder(r1=2.1,r2=1.65, h=0.5, $fn=25); - translate([-17.5+12,24.5,12])cylinder(r=5.8/2, h=20, $fn=25); - - translate([-16.5-12,24.5,-1])cylinder(r=1.65, h=20, $fn=25); - translate([-16.5-12,24.5,-0.1])cylinder(r1=2.1,r2=1.65, h=0.5, $fn=25); - translate([-16.5-12,24.5,12])cylinder(r=5.8/2, h=20, $fn=25); - - // Carriage slimer - translate([-55.5+3,19,-1])cube([10,40,30]); - translate([+12.5-3,19,-1])cube([10,40,30]); - translate([+12.5-3.5-2,30.8,-1])rotate([0,90-65,0])cube([10,55,30]); - translate([-55.5+6.7+2,19,-10])rotate([0,-90+65,0])cube([10,40,30]); - -} - -module x_carriage_fancy() -{ - // Top right corner - translate([11.5,8,0]) translate([0,45+11.5,-1]) rotate([0,0,45]) translate([0,-15,0]) cube([30,30,20]); - - // Top left corner - translate([-33-13.5,-5,0]) translate([0,45+11.5,-1]) rotate([0,0,135]) translate([0,-15,0]) cube([30,30,20]); - - translate([-27,74.5,9]) rotate([0,45,0]) translate([0,-15,0]) cube([5,25,5]); - translate([-23,86,16]) rotate([45,0,0]) translate([0,-15,0]) cube([45,5,5]); - - // bottom side edges - translate([-40,-15,-5]) rotate([30,0,0]) cube([45,6,15]); - translate([-35,-19.2,0]) rotate([0,0,45]) cube([6,6,16]); - translate([2,-19.2,0]) rotate([0,0,45]) cube([6,6,16]); - translate([2,55.9,12]) rotate([0,0,45]) cube([6,6,16]); - translate([-33.5,55.9,12]) rotate([0,0,45]) cube([6,6,16]); - -} - -module cable_tray() -{ - - // center screw block - translate([-21,23,0]) cube([9,12,15]); - - difference() - { - union() - { - translate([-20.8,24.8,0]) rotate([0,0,20]) cube([3,10,15]); - translate([-15.5,25.8,0]) rotate([0,0,-20]) cube([3,10,15]); - } - translate([-25,34.2,0]) cube([20,10,15]); - } - - translate([6.5,32,10]) cube([3,5,5]); - translate([-42.5,32,10]) cube([4,5,5]); - - //Left cable tray - translate([-39.9,11,0]) cube([9,2,15]); - translate([-39.9,5.5,0]) cube([9,2,15]); - - //Right cable tray - translate([-2,5.5,0]) cube([11.45,2,15]); - translate([-2,11,7]) cube([11.45,2,8]); - - translate([-31,11.5,7]) cube([30,1.5,8]); - - difference(){ - translate([0,11,0]) cube([9.50,12,7]); - translate([0,6,1])rotate([-30,0,0]) cube([7.5,12,7]); - translate([0,3.5,6])rotate([-60,0,0]) cube([7.5,12,7]); - translate([0,10+3,-1])cube([7.5,11,6]); - } - - -} - - -module final_cutout() -{ - // cable guide edges - translate([-44,0,16]) rotate([0,45,0]) cube([5,15,5]); - translate([6,0,16]) rotate([0,45,0]) cube([5,15,5]); - - // motor cable opening - translate([0.5,10+3,-1])cube([7,9.2,6]); - - // filament hole - - - difference () { - - union() { - translate([-14.199,9.05,0]) rotate([-5,0,22.5]) cylinder(r=1.62, h=40, $fn=8); - translate([-14.5,9.7,8]) rotate([-5,0,22.5]) cylinder(r=1.62,r2=3, h=8, $fn=8); - } - //translate([-18,6.7,12]) cube([7,7,5]); - - } - - // bottom back mounting screws - translate([-6.5,-11,4]) cylinder(r=1.65, h=20, $fn=50); - translate([-26.5,-11,4]) cylinder(r=1.65, h=20, $fn=50); - - difference() { - union(){ - translate([-29.3,-14,10]) cube([5.6,7,2.1]); - translate([-09.3,-14,10]) cube([5.6,7,2.1]); - } - translate([-36,-8.1,10]) cube([40,1,0.5]); - } - // better printing bridges - translate([-29.3,-12.65,10.35]) cube([5.6,3.3,2.1]); - translate([-09.3,-12.65,10.35]) cube([5.6,3.3,2.1]); - translate([-28.15,-12.65,10.7]) cube([3.3,3.3,2.1]); - translate([-8.15,-12.65,10.7]) cube([3.3,3.3,2.1]); - - - - // x-carriage-back mounting screws - translate([-4,56,0]) cylinder(r=1.7, h=40, $fn=50); - translate([-27.5,56,0]) cylinder(r=1.7, h=40, $fn=50); - translate([-30.3,53,8]) cube([5.6,8,2]); - translate([-6.8,53,8]) cube([5.6,8,2]); - - // better printing bridges - translate([-6.8,54.35,8.35]) cube([5.6,3.3,2]); - translate([-5.65,54.35,8.7]) cube([3.3,3.3,2]); - translate([-30.3,54.35,8.35]) cube([5.6,3.3,2]); - translate([-29.15,54.35,8.7]) cube([3.3,3.3,2]); - - - - // center mounting screw - translate([-16,29,0]) cylinder(r=1.65, h=40, $fn=50); - translate([-18.8,26,10.5]) cube([5.6,12,2.1]); - translate([-21,33,11]) cube([10,8,6]); - - // better printing bridges - translate([-18.8,27.35,10.9]) cube([5.6,3.3,2.1]); - translate([-17.65,27.35,11.25]) cube([3.3,3.3,2.1]); - - // opening for power cables to hotend & termistor cable - translate([-16.5,-18,-5]) rotate([-5,0,0]) cylinder(r=6, h=40, $fn=30); - -} - - -module x_carriage_block() -{ - difference() - { - union() - { - difference() - { - x_carriage_base(); - x_carriage_holes(); - x_carriage_fancy(); - } - cable_tray(); - } - final_cutout(); - } -} - -module x_carriage() -{ - difference() - { - x_carriage_block(); - - // upper motor screw - translate([2.5,67.5,-50]) cylinder(r=1.8, h=100, $fn=30); - translate([2.5,67.5,-0.1]) cylinder(r1=2.1,r2=1.8, h=0.5, $fn=25); - translate([2.5,67.5,5]) cylinder(r=3.2, h=8, $fn=30); - translate([0.5,22.5,0]) rotate([0,90,0]) cylinder(r=5.2, h=7.0, $fn=25); - - // cable management cleanup - difference() - { - translate([2.5,21.5,0]) rotate([0,90,0]) cylinder(r=5.2, h=5.0, $fn=25); - translate([2,16,-10]) cube([10,6,20]); - } - - // selective infill - - translate([5,-15.4,-1]) rotate([0,45,0]) cube([0.3,4.6,8]); - translate([8.45,11.5,1]) cube([0.5,1.8,4]); - - translate([5,-16.4,-1]) rotate([0,45,0]) cube([0.3,0.5,8]); - translate([5,-10.3,-1]) rotate([0,45,0]) cube([0.3,0.5,8]); - translate([6,-16.5,-1]) cube([1,0.5,5]); - translate([3,-16.5,-1]) cube([2,0.5,5]); - translate([6,-10.2,-1]) cube([1,0.5,5]); - translate([3,-10.2,-1]) cube([2,0.5,5]); - translate([6,7.5,-1]) cube([1,0.5,5]); - translate([6,10.5,-1]) cube([1,0.5,5]); - - translate([-19,24,1.5]) cube([6,0.5,12.0]); - - //cable openings in guides - translate([-40.8,7.5,0]) rotate([0,20,0]) cube([5,3.5,20]); - translate([-2.9,7.5,18]) rotate([0,80,0]) cube([20,3.55,5]); - - // filament sensor connector - translate([-12.5,64,-3]) cube([4,11.2,14]); - translate([-12.5,65.75,-3]) cube([5,2.5,14]); - translate([-12.5,71.75,-3]) cube([5,2.5,14]); - translate([-14.5,67,-3]) cube([4,6,14]); - translate([-14.5,65,4.7]) cube([4,10.2,5]); - translate([-12.5,54.5,8]) cube([3.5,10.2,14]); - translate([-12.5,57.5,9.5]) rotate([35,0,0]) cube([3.5,10.2,14]); - translate([-12.5,58,8]) rotate([0,0,45]) cube([3,3,14]); - translate([-10,58,8]) rotate([0,0,45]) cube([3,3,14]); - - translate([0,-0.5,0]) left_belt_cut(); - translate([0,0.5,0]) right_belt_cut(); - - //version - translate([-2,-8,0.5]) rotate([0,180,0]) linear_extrude(height = 0.6) - { text("R3",font = "helvetica:style=Bold", size=5, center=true); } - - } -} - - -module left_belt_cut() -{ - - translate([-22.5,30.2,7]) cylinder(r=1.5, h=100, $fn=30); - translate([-23.0,20,7]) cube([2,10,30]); - translate([-56.5,28.5,7]) belt_cut(); - translate([13.5,20.5,0]) rotate([0,0,25]) - { - difference() - { - translate([-56.5,28.5,7]) belt_cut(); - translate([-80,25,7]) cube([37.5,10,30]); - } - } - translate([13.2,2.38,0]) rotate([0,0,0]) - { - difference() - { - translate([-56.5,28.5,7]) belt_cut(); - translate([-82.42,25,7]) cube([37.5,10,30]); - } - } - translate([-45,17.6,4]) rotate([0,0,-15]) cube([10,3,30]); - translate([-31.5,30.4,10]) rotate([-10,0,15]) cylinder(r=0.2, h=100, $fn=30); - translate([-31.6,30.75,7]) rotate([0,0,0]) cylinder(r=0.2, h=100, $fn=30); - } - - -module right_belt_cut() -{ - // right belt cut - translate([-9.6,29.7,7]) cylinder(r=1.5, h=100, $fn=30); - translate([-11.1,19.8,7]) cube([2,10,30]); - translate([22.5,25.5,7]) belt_cut(); - translate([66.65,1.95,0]) rotate([0,0,0]) - { - difference() - { - translate([-56.5,28.5,7]) belt_cut(); - translate([-71.55,25,7]) cube([37.5,10,30]); - } - } - translate([43.2,-30.25,0]) rotate([0,0,-30]) - { - difference() - { - translate([-56.5,28.5,7]) belt_cut(); - translate([-82.1,25,7]) cube([10,10,30]); - translate([-61.5,25,7]) cube([20.5,10,30]); - } - } - translate([2,14.6,7]) rotate([0,0,15]) cube([10,3,30]); - translate([-5.1,30,10]) rotate([-10,0,-15]) cylinder(r=0.2, h=100, $fn=30); - translate([-5,30.3,7]) rotate([0,0,0]) cylinder(r=0.2, h=100, $fn=30); - } - -x_carriage(); - - - - -