diff --git a/Printed-Parts/scad/y-belt-holder.scad b/Printed-Parts/scad/y-belt-holder.scad
deleted file mode 100755
index 375ae4f..0000000
--- a/Printed-Parts/scad/y-belt-holder.scad
+++ /dev/null
@@ -1,86 +0,0 @@
-// PRUSA iteration3
-// Y belt holder
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-module main_body()
-{
-translate([-1, -1, -1 ]) cube([ 30, 27, 15 ]);
-translate([-10, 16, -1 ]) cube([ 50.5, 10, 15 ]);
-translate([-10, 23, -1 ]) cube([ 52, 3, 15 ]);
-}
-
-module belt_holders()
-{
-    
-   translate([ 16, 18, 0 ]) cylinder( h=11, r=3.5, $fn=30 );  // upper belt holder
-    translate([ 16, 18, 11 ]) cylinder( h=3, r1=3.5, r2=2.5, $fn=30 );  // upper belt holder cone
-    
-    translate([ 12, 5, 0 ]) cylinder( h=11, r=3.5, $fn=30 );  // lower belt holder
-    translate([ 12, 5, 11 ]) cylinder( h=3 , r1=3.5, r2=2.5, $fn=30 );  // lower belt holder cone
-}
-
-module screws()
-{
-    translate( [ -2.5 , 28 , 7.5 ] ) rotate([90,0,0]) cylinder( h = 10, r = 1.6, $fn=30);  //screw hole
-    translate( [ -5.5 , 28 , 7.5 ] ) rotate([90,0,0]) cylinder( h = 10, r = 1.6, $fn=30);  //screw hole
-    translate( [ -2.5, 22 , 7.5 ] ) rotate([90,0,0]) cylinder( h = 7, r = 3, $fn=30);  //screw hole - head
-    translate( [ -5.5 , 22 , 7.5 ] ) rotate([90,0,0]) cylinder( h = 10, r = 3, $fn=30);  //screw hole - head
-    
-    translate( [ 35.5 , 28 , 7.5 ] ) rotate([90,0,0]) cylinder( h = 10, r = 1.6, $fn=30);  //screw hole
-    translate( [ 38.5 , 28 , 7.5 ] ) rotate([90,0,0]) cylinder( h = 10, r = 1.6, $fn=30);  //screw hole
-    translate( [ 35.5 , 22 , 7.5 ] ) rotate([90,0,0]) cylinder( h = 10, r = 3, $fn=30);  //screw hole - head
-    translate( [ 38.5 , 22 , 7.5 ] ) rotate([90,0,0]) cylinder( h = 10, r = 3, $fn=30);  //screw hole - head
-    
-    translate([-5.5, 21, 5.9 ]) cube([ 3, 6, 3.2 ]);
-    translate([35.5, 21, 5.9 ]) cube([ 3, 6, 3.2 ]);
-    
-    translate([-5.5, 15, 4.5 ]) cube([ 3, 7, 6 ]);
-    translate([35.5, 15, 4.5 ]) cube([ 6, 7, 6 ]);
-}
-
-belt_holders();
-
-difference()
-{
-main_body();
-    
-translate([ 16, 18, 2 ]) cylinder( h = 16, r = 7.2, $fn=30 );  // upper belt space cutaway
-translate([ 12, 5, 2 ]) cylinder( h = 16, r = 7.2, $fn=30 );  // lower belt space cutaway
-
-translate([-20, 9, 2]) cube([ 28, 2.1, 16 ]); 
-rotate([0,0,40]) translate([11, 1, 2 ]) cube([ 10, 4, 16 ]);     
-    
-translate([10, 7, 2 ]) cube([ 32, 2.1, 16 ]); 
-    
-translate([16, 8, 11 ]) rotate([45,0,0]) cube([ 15, 5, 5 ]);     
-translate([-2, 10, 11 ]) rotate([45,0,0]) cube([ 10, 5, 5 ]);     
-
-screws();
-    
-
-
-    // print part reinforcement
-    translate([1,0.5,-0.5]) cube([0.1,5,13]);     
-    translate([3,0.5,-0.5]) cube([0.1,5,13]);     
-    translate([21.2,0.5,-0.5]) cube([0.1,4,12]);
-    translate([23.5,0.5,-0.5]) cube([0.1,4,12]);
-    translate([25.5,0.5,-0.5]) cube([0.1,4,12]);
-    translate([11.5,3,-0.5]) cube([1,0.3,12]);
-    translate([10,5,-0.5]) cube([4,0.3,12]);
-    translate([11.5,6.5,-0.5]) cube([1,0.3,12]);
-    translate([15.5,16,-0.5]) cube([1,0.3,12]);
-    translate([14,18,-0.5]) cube([4,0.3,12]);
-    translate([15.5,20,-0.5]) cube([1,0.3,12]);    
- 
- 
-    // corner cutoff
-    translate([30,-13,-2]) rotate([0,0,45]) cube([10,10,20]);    
-    translate([-2,-13,-2]) rotate([0,0,45]) cube([10,10,20]);    
-    
-    
-}
-
-