diff --git a/Printed-Parts/scad/Heatbed-cable-clip_8mm.scad b/Printed-Parts/scad/Heatbed-cable-clip_8mm.scad
new file mode 100644
index 0000000..f97252a
--- /dev/null
+++ b/Printed-Parts/scad/Heatbed-cable-clip_8mm.scad
@@ -0,0 +1,83 @@
+// PRUSA iteration4
+// Heatbed cable clip
+// GNU GPL v3
+// Josef Průša <iam@josefprusa.cz> and contributors
+// http://www.reprap.org/wiki/Prusa_Mendel
+// http://prusamendel.org
+
+
+ module heatbed_cable_clip()
+{
+    
+difference()
+{    
+    
+    union()
+    {
+        difference()
+        {
+            union()
+            {
+                // body base
+                translate([75,99,28]) rotate([90,0,0]) cylinder( h = 15, r = 13, $fn=30); 
+                translate([75,101,28]) rotate([90,0,0]) cylinder( h = 2, r1=9,r2 = 13, $fn=30); 
+                
+            }
+
+             
+           
+            
+            // cut flat and shape
+            translate([60,82,14]) cube([30,20,14]);  
+            translate([60,72,20]) cube([30,20,30]); 
+        }
+         
+        
+        difference() {
+        translate([62.75,84,28]) cube([24.5,8,7]);
+        difference () {
+        translate([75,85,28]) rotate([90,0,0]) cube([30,20,10], center = true);    
+        translate([75,90,28]) rotate([90,0,0]) cylinder(h=6,r1=16.5,r2=11,$fn=30);   
+           
+        } 
+    }}
+    
+    // cable opening
+    translate([61,102,28]) rotate([35,90,0])
+    
+    difference (){
+   
+    cylinder(h=35,r=5,$fn=30);
+       
+    
+    //translate([0,0,3]) cylinder(h=5,r=5,$fn=30);
+    translate([0,0,12]) cylinder(h=1,r=5,$fn=30); 
+    translate([0,0,16]) cylinder(h=1,r=5,$fn=30); 
+    translate([0,0,20]) cylinder(h=1,r=5,$fn=30);
+   
+    }
+     translate([61,102,28]) rotate([35,90,0]) cylinder(h=35,r=4.3,$fn=30);
+    
+  
+    
+    // screw heads
+    translate([67,88.8,30.5]) rotate([0,0,0]) cylinder(h=10,r=3.2,$fn=30); 
+    translate([83,96,31]) rotate([0,0,0]) cylinder(h=10,r=3.2,$fn=30); 
+    
+    
+    // screws
+            translate([67,88.8,14]) rotate([0,0,0]) cylinder(h=35,r=1.6,$fn=50); 
+            translate([83,96,14]) rotate([0,0,0]) cylinder(h=35,r=1.6,$fn=50);
+    
+
+    
+    
+    
+}
+
+
+    
+
+} 
+
+translate([-70,-110,0]) heatbed_cable_clip();