diff --git a/Printed-Parts/scad/Extruder-cable-clip.scad b/Printed-Parts/scad/Extruder-cable-clip.scad
deleted file mode 100644
index 520108e..0000000
--- a/Printed-Parts/scad/Extruder-cable-clip.scad
+++ /dev/null
@@ -1,58 +0,0 @@
-// PRUSA iteration4
-// Extruder cable clip
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-module extruder_cable_clip()
-{
-        
-    difference(){
-    difference()
-    {
-        union()
-        {
-            // body shape
-            translate([-6,28,28]) rotate([0,90,0]) cylinder(h=6,r=13.5,$fn=30);  
-            translate([-10,28,28]) rotate([0,90,0]) cylinder(h=4,r1=8.5,r2=13.5, $fn=30);  
-            translate([0,16.6,28]) cube([2.9,22.8,7]); 
-        }
-        
-        // bottom cut and shape
-        translate([-15,7,13]) cube([30,40,15]); 
-        translate([-20,28,28]) rotate([0,90,0]) cylinder(h=40,r=6, $fn=30);
-        
-        // screws
-        translate([-2.7,19.5,25]) rotate([0,0,90]) cylinder(h= 10, r = 1.6, $fn=50); 
-        translate([-2.7,36.5,25]) rotate([0,0,90]) cylinder( h = 10, r = 1.6, $fn=50); 
-        translate([-2.7,36.5,32]) rotate([0,0,90]) cylinder( h = 13, r = 3.1, $fn=30);
-        translate([-2.7,19.5,32]) rotate([0,0,90]) cylinder( h = 13, r = 3.1, $fn=30); 
-        
-        // screw heads opening
-        translate([-2.7,16.4,35]) cube([10,6.2,15]); 
-        translate([-2.7,33.4,35]) cube([10,6.2,15]); 
-        
-        
-    }
-    
-    difference()
-    {
-        // cable grip
-        translate([-8,28,28]) rotate([0,90,0]) cylinder( h = 10, r = 6, $fn=30);
-        translate([-20,28,28]) rotate([0,90,0]) cylinder( h = 40, r = 5.5, $fn=30);
-        translate([-15,7,13]) cube([30,40,15]); 
-        translate([-6,7,13]) cube([2,40,25]); 
-        translate([-2,7,13]) cube([2,40,25]); 
-        
-    }
-    
-    
-    //nylon hole
-        
-        translate([-3,28,28]) rotate([35,90,0]) cylinder( h = 24,r = 1.8,$fn=30);}}
-
-
-//translate([0,0,0]) extruder_cable_clip();
-
-translate([6,-28,-28]) extruder_cable_clip();
\ No newline at end of file