diff --git a/Printed-Parts/scad/y-motor.scad b/Printed-Parts/scad/y-motor.scad
index d9cd4d8..f91982f 100755
--- a/Printed-Parts/scad/y-motor.scad
+++ b/Printed-Parts/scad/y-motor.scad
@@ -1,77 +1,80 @@
-// PRUSA iteration3
-// Y motor mount
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-//include <configuration.scad>
-
-module y_motor_base(){
- // Motor holding part
-    translate(v = [29,-21+50,0]){
-    translate(v = [-21+4.5,0,5]) cube(size = [9,31,10], center=true);
-    translate(v = [-15.5,-15.5,0]) cylinder(h = 10, r=5.5, $fn=50);
-    translate(v = [-15.5,+15.5,0]) cylinder(h = 10, r=5.5, $fn=50);
-
-    //end stop
-    translate(v = [-10.5,+15.5,0]) cylinder(h = 10, r=5.5, $fn=50);
-    translate([-12,0,0]) cube([7, 15, 10]);
-    translate([-16,16,0]) cube([6, 5, 10]);
-    translate([-21,8,0]) cube([18, 5, 28]);	
-        
-  // Joins motor holder and rod plate
-  translate(v = [-29,-21,0]) cube(size = [14,30,10]);
- }
- // Front holding part
- translate(v = [0,10,0]) cylinder(h = 10, r=8, $fn=80);
- translate(v = [0,20,5])cube(size = [16,20,10], center=true);	
- translate(v = [0,30,0])cylinder(h = 10, r=8, $fn=80);
-}
-
-module y_motor_holes(){
- translate(v = [29,-21+50,0]){
-  // Screw head holes
-  translate(v = [-15.5,-15.5,-1]) cylinder(h = 10, r=1.8, $fn=20);
-  translate(v = [-15.5,+15.5,-1]) cylinder(h = 10, r=1.8, $fn=20);
-  // Screw holes
-  translate(v = [-15.5,-15.5,7]) cylinder(h = 7, r=3.5, $fn=30);
-  translate(v = [-15.5,+15.5,7]) cylinder(h = 25, r=3.5, $fn=30);
- }
- translate(v = [0,10,-1]) cylinder(h = 12, r=4.1, $fn=50);	
- translate(v = [0,30,-1]) cylinder(h = 12, r=4.1, $fn=50);
- 
- //endstop
-    translate([25,29,0])  cylinder(h = 20, r=8, $fn=20); 
-   
-    translate([20,45,15]) rotate([90,0,0]) cylinder(h = 10, r=0.8, $fn=20);
-    translate([20,42.2,15]) rotate([90,0,0]) cylinder(h = 2, r1=1.2, r2=0.8, $fn=20);
- 
-    translate([20,45,24]) rotate([90,0,0]) cylinder(h = 10, r=0.8, $fn=20);
-    translate([20,42.2,24]) rotate([90,0,0]) cylinder(h = 2, r1=1.2, r2=0.8, $fn=20);
-   
-    // endstop corner cutout
-    translate([-5,35,28]) rotate([0,45,0]) cube([15, 10, 15]);	
-    translate([-1,41,10])  cube([15, 5, 15]);	
-    translate([27,33,0]) rotate([0,0,45]) cube([5, 5, 28]);	
-    
-    translate([19,32,0]) rotate([0,30,0]) cube([8, 20, 18]);	
-    translate([24.5,32,17]) rotate([0,45,0]) cube([2, 20, 2]);	
-    
-    translate([23,32,29]) rotate([0,45,0]) cube([5, 20, 5]);	
-}
-
-
-
-
-//#translate([18,40,10]) cube([8, 5, 5]);	
-
-// Final part
-module y_motor(){
- difference(){
-  y_motor_base();
-  y_motor_holes();
- }
-}
-
-y_motor();
+// PRUSA iteration3
+// Y motor mount
+// GNU GPL v3
+// Josef Průša <iam@josefprusa.cz> and contributors
+// http://www.reprap.org/wiki/Prusa_Mendel
+// http://prusamendel.org
+
+//include <configuration.scad>
+
+module y_motor_base(){
+ // Motor holding part
+    translate(v = [29,-21+50,0]){
+    translate(v = [-21+4.5,0,5]) cube(size = [9,31,10], center=true);
+    translate(v = [-15.5,-15.5,0]) cylinder(h = 10, r=5.5, $fn=50);
+    translate(v = [-15.5,+15.5,0]) cylinder(h = 10, r=5.5, $fn=50);
+    translate([-21,7,0]) rotate([0,0,45]) cube([2, 2, 10]);    
+
+    //end stop
+    translate(v = [-10.5,+15.5,0]) cylinder(h = 10, r=5.5, $fn=50);
+    translate([-12,0,0]) cube([7, 15, 10]);
+    translate([-16,16,0]) cube([6, 5, 10]);
+    translate([-21+6,8,0]) cube([12, 5, 28]);
+    translate([-21+6,8-5,0]) cube([4, 10, 28]);
+    translate([-21+9.5,7,0]) rotate([0,0,45]) cube([2, 2, 28]);    
+  // Joins motor holder and rod plate
+  translate(v = [-29,-21,0]) cube(size = [14,30,10]);
+ }
+ // Front holding part
+ translate(v = [0,10,0]) cylinder(h = 10, r=8, $fn=80);
+ translate(v = [0,20,5])cube(size = [16,20,10], center=true);	
+ translate(v = [0,30,0])cylinder(h = 10, r=8, $fn=80);
+}
+
+module y_motor_holes(){
+ translate(v = [29,-21+50,0]){
+  // Screw head holes
+  translate(v = [-15.5,-15.5,-1]) cylinder(h = 10, r=1.8, $fn=20);
+  translate(v = [-15.5,+15.5,-1]) cylinder(h = 10, r=1.8, $fn=20);
+  // Screw holes
+  translate(v = [-15.5,-15.5,7]) cylinder(h = 7, r=3.5, $fn=30);
+  translate(v = [-15.5,+15.5,7]) cylinder(h = 25, r=3.5, $fn=30);
+ }
+ translate(v = [0,10,-1]) cylinder(h = 12, r=4.1, $fn=50);	
+ translate(v = [0,30,-1]) cylinder(h = 12, r=4.1, $fn=50);
+ 
+ //endstop
+    translate([25,29,0])  cylinder(h = 29, r=8, $fn=20); 
+   
+    translate([20,45,15]) rotate([90,0,0]) cylinder(h = 10, r=0.8, $fn=20);
+    translate([20,42.2,15]) rotate([90,0,0]) cylinder(h = 2, r1=1.2, r2=0.8, $fn=20);
+ 
+    translate([20,45,24]) rotate([90,0,0]) cylinder(h = 10, r=0.8, $fn=20);
+    translate([20,42.2,24]) rotate([90,0,0]) cylinder(h = 2, r1=1.2, r2=0.8, $fn=20);
+   
+    // endstop corner cutout
+    translate([-5,30,28]) rotate([0,45,0]) cube([15, 19, 15]);	
+    translate([-1,41,10])  cube([15, 5, 15]);	
+    translate([27,33,0]) rotate([0,0,45]) cube([5, 5, 28]);	
+    translate([12,28,10.01]) rotate([0,0,45]) cube([5, 5, 28]);
+    
+    translate([19,32,0]) rotate([0,30,0]) cube([8, 20, 18]);	
+    translate([24.5,32,17]) rotate([0,45,0]) cube([2, 20, 2]);	
+    
+    translate([23,32,29]) rotate([0,45,0]) cube([5, 20, 5]);	
+}
+
+
+
+
+//#translate([18,40,10]) cube([8, 5, 5]);	
+
+// Final part
+module y_motor(){
+ difference(){
+  y_motor_base();
+  y_motor_holes();
+ }
+}
+
+y_motor();
diff --git a/Printed-Parts/stl/y-motor.stl b/Printed-Parts/stl/y-motor.stl
index afe63eb..8560ba7 100755
Binary files a/Printed-Parts/stl/y-motor.stl and b/Printed-Parts/stl/y-motor.stl differ