diff --git a/Printed-Parts/scad/x-end-idler.scad b/Printed-Parts/scad/x-end-idler.scad
index ca420ef..2ec8726 100755
--- a/Printed-Parts/scad/x-end-idler.scad
+++ b/Printed-Parts/scad/x-end-idler.scad
@@ -1,72 +1,70 @@
-// PRUSA iteration3
-// X end idler
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-use <x-end.scad>
-
-
-
-module x_end_idler_holes(){
-    x_end_holes();
-    translate([0,3.5,0]){
-    translate(v=[0,-22,30.25]) rotate(a=[0,-90,0]) cylinder(h = 80, r=1.8, $fn=30);
-    translate(v=[1.5,-22,30.25]) rotate(a=[0,-90,0]) cylinder(h = 10, r=3.1, $fn=30);
-    translate(v=[-21.5,-22,30.25]) rotate(a=[0,-90,0]) rotate(a=[0,0,30]) cylinder(h = 80, r=3.2, $fn=6);
-        
- }
-}
-
-
-module waste_pocket(){
- // waste pocket
-    translate([-15,-1,6]) rotate([90,0,0]) cylinder( h=5, r=5, $fn=30);     
-    translate([-15,-1,51]) rotate([90,0,0]) cylinder( h=5, r=5, $fn=30);    
-
-    
-    //M3 thread
-    translate([-15,8.5,6]) rotate([90,0,0]) cylinder( h=12, r=1.4, $fn=30); 
-    translate([-15,8.5,51]) rotate([90,0,0]) cylinder( h=12, r=1.4, $fn=30); 
-
-    //M3 heads
-    translate([-15,11.5,6]) rotate([90,0,0]) cylinder( h=4, r=2.9, $fn=30); 
-    translate([-15,11.5,51]) rotate([90,0,0]) cylinder( h=4, r=2.9, $fn=30); 
-
-    //M3 nut traps
-    translate([-15,3.5,6]) rotate([90,90,0]) cylinder( h=3, r=3.3, $fn=6); 
-    translate([-15,3.5,51]) rotate([90,90,0]) cylinder( h=3, r=3.3, $fn=6);
-    translate([-17.9,0.5,52]) cube([5.8,3.1,20]);
-    translate([-17.9,0.5,-10]) cube([5.8,3.1,16]);
-}
-
-
-module x_end_idler_base(){
-    union(){
-        difference(){
-            x_end_base();
-            x_end_idler_holes();
-        }
-        translate([-15,8.5,6]) rotate([90,0,0]) cylinder( h=11, r=6, $fn=30);
-        translate([-15,8.5,51]) rotate([90,0,0]) cylinder( h=11, r=6, $fn=30);
-    }
-}
-
-
-module x_end_idler(){
-    mirror([0,1,0]) 
-    difference(){
-        x_end_idler_base();
-        waste_pocket();
-        
-    }
-    
-}
-
-//difference(){
-x_end_idler();
-//translate([-15,-50,0])   cube([100,100,100]);
-//}
-
-
+// PRUSA iteration3
+// X end idler
+// GNU GPL v3
+// Josef Průša <iam@josefprusa.cz> and contributors
+// http://www.reprap.org/wiki/Prusa_Mendel
+// http://prusamendel.org
+
+use <x-end.scad>
+
+
+
+module x_end_idler_holes(){
+    x_end_holes();
+    translate([0,3.5,0]){
+    translate(v=[0,-22,30.25]) rotate(a=[0,-90,0]) cylinder(h = 80, r=1.8, $fn=30);
+    translate(v=[1.5,-22,30.25]) rotate(a=[0,-90,0]) cylinder(h = 10, r=3.1, $fn=30);
+    translate(v=[-21.5,-22,30.25]) rotate(a=[0,-90,0]) rotate(a=[0,0,30]) cylinder(h = 80, r=3.2, $fn=6);
+        
+ }
+}
+
+
+module waste_pocket(){
+ // waste pocket
+    translate([-15,-1,6]) rotate([90,0,0]) cylinder( h=5, r=5, $fn=30);     
+    translate([-15,-1,51]) rotate([90,0,0]) cylinder( h=5, r=5, $fn=30);    
+
+    
+    //M3 thread
+    translate([-15,8.5,6]) rotate([90,0,0]) cylinder( h=12, r=1.4, $fn=30); 
+    translate([-15,8.5,51]) rotate([90,0,0]) cylinder( h=12, r=1.4, $fn=30); 
+
+    //M3 heads
+    translate([-15,11.5,6]) rotate([90,0,0]) cylinder( h=4, r=2.9, $fn=30); 
+    translate([-15,11.5,51]) rotate([90,0,0]) cylinder( h=4, r=2.9, $fn=30); 
+
+    //M3 nut traps
+    translate([-17.9,0.5,52-3-1.6]) cube([5.8,3.1,20]);
+    translate([-17.9,0.5,-10+1.5+1.6]) cube([5.8,3.1,16]);
+}
+
+
+module x_end_idler_base(){
+    union(){
+        difference(){
+            x_end_base();
+            x_end_idler_holes();
+        }
+        translate([-15,8.5,6]) rotate([90,0,0]) cylinder( h=11, r=6, $fn=30);
+        translate([-15,8.5,51]) rotate([90,0,0]) cylinder( h=11, r=6, $fn=30);
+    }
+}
+
+
+module x_end_idler(){
+    mirror([0,1,0]) 
+    difference(){
+        x_end_idler_base();
+        waste_pocket();
+        
+    }
+    
+}
+
+//difference(){
+x_end_idler();
+//translate([-15,-50,0])   cube([100,100,100]);
+//}
+
+
diff --git a/Printed-Parts/stl/x-end-idler.stl b/Printed-Parts/stl/x-end-idler.stl
index 334f31f..3152dab 100755
Binary files a/Printed-Parts/stl/x-end-idler.stl and b/Printed-Parts/stl/x-end-idler.stl differ