diff --git a/Printed-Parts/SCAD/heatbed-cable-cover-clip.scad b/Printed-Parts/SCAD/heatbed-cable-cover-clip.scad
index d59134e..5fa0521 100644
--- a/Printed-Parts/SCAD/heatbed-cable-cover-clip.scad
+++ b/Printed-Parts/SCAD/heatbed-cable-cover-clip.scad
@@ -1,120 +1,120 @@
-// PRUSA iteration4
-// Heatbed cable cover clip MK3S
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-
-module m3_nut()
-{
-    difference()
-    {
-        union()
-        {
-            cylinder( h = 4, r = 3.15, $fn=6);  
-            translate([0,0,2.5]) cylinder( h = 4, r1 = 3.15, r2=4,$fn=6);  
-            translate([0,0,-9])  cylinder( h = 12, r = 1.7, $fn=30);  
-            translate([0,0,-0.49]) cylinder( h = 0.5, r1 = 1.7, r2=1.95,$fn=30);  
-        }
-        translate([1.7,-5,-1]) cube([5,10,2]); 
-        translate([-6.7,-5,-1]) cube([5,10,2]); 
-        
-        translate([-5,1.7,-1.5]) cube([10,5,2]); 
-        translate([-5,-6.7,-1.5]) cube([10,5,2]); 
-        
-    }
-}
-
-/**
-* These protusions prevent cable breakage in the event of the build platform colliding
-* with an object behind the printer. Hours of wasted life will be saved :)
-*
-* square collision ends allow a solid easily detected hit and will not cause the 
-* machine to jump up or down. 
-**/
-module cable_break_preventer() 
-{
-    z_offset = -3;
-    center_offset = 4.4;
-    block_length = 12;
-    block_width = 5;
-    block_height = 6;
-    
-    translate([center_offset, 20.5 + 15.5, z_offset])
-    cube([block_width, block_length, block_height]);
-
-    translate([-block_width - center_offset, 20.5 + 15.5, z_offset])
-    cube([block_width, block_length, block_height]);
-    
-}
-
-module clip()
-{
-    difference()
-    {
-        // base body
-        translate([-15,15.5,-3]) cube([30,20.5,6]); 
-        
-        // inner angled cut
-        translate([3.5,2,0]) rotate([0,0,0])  cube([10.5,15,6]);
-        translate([-14,2,0]) rotate([0,0,0])  cube([10.5,15,6]);
-        
-        translate([3.5,15,0]) rotate([0,0,0])  cube([7,8,6]);
-        translate([-10.5,15,0]) rotate([0,0,0])  cube([7,8,6]);
-       
-        translate([6.96,19.45,1]) rotate([0,0,45])  cube([5,10,6]);
-        translate([-6.96,19.45,1]) rotate([0,0,45])  cube([10,5,6]); 
-        
-        translate([-0,37,3]) rotate([90,0,0]) cylinder(h = 17, r=3.5, $fn=60);
-            
-        translate([-7,15,0]) rotate([0,0,0])  cube([14,11,6]);
-       
-        translate([3,14,1]) rotate([0,0,10])  cube([7,13,6]);
-        translate([-9.88,15.21,1]) rotate([0,0,-10])  cube([7,13,6]); 
-        
-        // cables cut
-        translate([-0,36,3]) rotate([90,0,0]) cylinder(h = 187, r=4, $fn=60); 
-       
-        translate([-11,30,0]) rotate([0,180,30]) m3_nut();
-        translate([11,30,0]) rotate([0,180,30]) m3_nut();
-       
-        // thermistor cable entry
-        translate([-0,22,4]) rotate([115,0,0]) cylinder(h = 15, r=3, $fn=60);     
-    
-    
-        // edges  
-        translate([-18.0,32,-5]) rotate([0,0,25])  cube([11,11,15]);
-        translate([18,32,-5]) rotate([0,0,65])  cube([11,11,15]);
-     
-    }
-    
-    // cable rims
-    difference()
-    {
-        difference()
-        {
-            translate([-0,36,3]) rotate([90,0,0]) cylinder(h = 10, r=4.5, $fn=60); 
-            translate([-0,37,3]) rotate([90,0,0]) cylinder(h = 17, r=3, $fn=60);
-            
-        }
-        translate([-15,18,3]) cube([30,20,6]);    
-        translate([-15,27,-5]) cube([30,2,16]);    
-        translate([-15,30,-5]) cube([30,2,16]);    
-        translate([-15,33,-5]) cube([30,2,16]); 
-        translate([6.96,19.45,1]) rotate([0,0,45])  cube([5,10,6]);
-        translate([-6.96,19.45,1]) rotate([0,0,45])  cube([10,5,6]); 
-        translate([-4,20,0]) rotate([0,0,0])  cube([8,11,6]); 
-        
-    }
-       
-}
-
-clip();
-cable_break_preventer();
-
-
-
-
-
-
+// PRUSA iteration4
+// Heatbed cable cover clip MK3S
+// GNU GPL v3
+// Josef Průša <iam@josefprusa.cz> and contributors
+// http://www.reprap.org/wiki/Prusa_Mendel
+// http://prusamendel.org
+
+
+module m3_nut()
+{
+    difference()
+    {
+        union()
+        {
+            cylinder( h = 4, r = 3.15, $fn=6);  
+            translate([0,0,2.5]) cylinder( h = 4, r1 = 3.15, r2=4,$fn=6);  
+            translate([0,0,-9])  cylinder( h = 12, r = 1.7, $fn=30);  
+            translate([0,0,-0.49]) cylinder( h = 0.5, r1 = 1.7, r2=1.95,$fn=30);  
+        }
+        translate([1.7,-5,-1]) cube([5,10,2]); 
+        translate([-6.7,-5,-1]) cube([5,10,2]); 
+        
+        translate([-5,1.7,-1.5]) cube([10,5,2]); 
+        translate([-5,-6.7,-1.5]) cube([10,5,2]); 
+        
+    }
+}
+
+/**
+* These protusions prevent cable breakage in the event of the build platform colliding
+* with an object behind the printer. Hours of wasted life will be saved :)
+*
+* square collision ends allow a solid easily detected hit and will not cause the 
+* machine to jump up or down. 
+**/
+module cable_break_preventer() 
+{
+    z_offset = -3;
+    center_offset = 4.4;
+    block_length = 12;
+    block_width = 5;
+    block_height = 6;
+    
+    translate([center_offset, 20.5 + 15.5, z_offset])
+    cube([block_width, block_length, block_height]);
+
+    translate([-block_width - center_offset, 20.5 + 15.5, z_offset])
+    cube([block_width, block_length, block_height]);
+    
+}
+
+module clip()
+{
+    difference()
+    {
+        // base body
+        translate([-15,15.5,-3]) cube([30,20.5,6]); 
+        
+        // inner angled cut
+        translate([3.5,2,0]) rotate([0,0,0])  cube([10.5,15,6]);
+        translate([-14,2,0]) rotate([0,0,0])  cube([10.5,15,6]);
+        
+        translate([3.5,15,0]) rotate([0,0,0])  cube([7,8,6]);
+        translate([-10.5,15,0]) rotate([0,0,0])  cube([7,8,6]);
+       
+        translate([6.96,19.45,1]) rotate([0,0,45])  cube([5,10,6]);
+        translate([-6.96,19.45,1]) rotate([0,0,45])  cube([10,5,6]); 
+        
+        translate([-0,37,3]) rotate([90,0,0]) cylinder(h = 17, r=3.5, $fn=60);
+            
+        translate([-7,15,0]) rotate([0,0,0])  cube([14,11,6]);
+       
+        translate([3,14,1]) rotate([0,0,10])  cube([7,13,6]);
+        translate([-9.88,15.21,1]) rotate([0,0,-10])  cube([7,13,6]); 
+        
+        // cables cut
+        translate([-0,36,3]) rotate([90,0,0]) cylinder(h = 187, r=4, $fn=60); 
+       
+        translate([-11,30,0]) rotate([0,180,30]) m3_nut();
+        translate([11,30,0]) rotate([0,180,30]) m3_nut();
+       
+        // thermistor cable entry
+        translate([-0,22,4]) rotate([115,0,0]) cylinder(h = 15, r=3, $fn=60);     
+    
+    
+        // edges  
+        translate([-18.0,32,-5]) rotate([0,0,25])  cube([11,11,15]);
+        translate([18,32,-5]) rotate([0,0,65])  cube([11,11,15]);
+     
+    }
+    
+    // cable rims
+    difference()
+    {
+        difference()
+        {
+            translate([-0,36,3]) rotate([90,0,0]) cylinder(h = 10, r=4.5, $fn=60); 
+            translate([-0,37,3]) rotate([90,0,0]) cylinder(h = 17, r=3, $fn=60);
+            
+        }
+        translate([-15,18,3]) cube([30,20,6]);    
+        translate([-15,27,-5]) cube([30,2,16]);    
+        translate([-15,30,-5]) cube([30,2,16]);    
+        translate([-15,33,-5]) cube([30,2,16]); 
+        translate([6.96,19.45,1]) rotate([0,0,45])  cube([5,10,6]);
+        translate([-6.96,19.45,1]) rotate([0,0,45])  cube([10,5,6]); 
+        translate([-4,20,0]) rotate([0,0,0])  cube([8,11,6]); 
+        
+    }
+       
+}
+
+clip();
+cable_break_preventer();
+
+
+
+
+
+