diff --git a/Printed-Parts/scad/cable-holder.scad b/Printed-Parts/scad/cable-holder.scad
deleted file mode 100644
index 6040600..0000000
--- a/Printed-Parts/scad/cable-holder.scad
+++ /dev/null
@@ -1,85 +0,0 @@
-// PRUSA iteration4
-// cable holder
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-
-module zip_main()
-{
-    // ziptie cut for upper cables
-    
-    translate([-10,-30.5,24]) cube([20,2,3]);
-    translate([-6,-30.5,24]) cube([2,20,3]);
-    translate([5,-30.5,24]) cube([2,20,3]);
-    
-    difference()
-    {
-        translate([0.5,-26,24]) rotate([0,0,90]) cylinder( h=3, r=6, $fn=30 );
-        translate([0.5,-26,23]) rotate([0,0,90]) cylinder( h=5, r=4.6, $fn=30 );
-        translate([-10,-35.5,23]) cube([20,5,5]);        
-        translate([-10,-27,23]) cube([20,10,5]);        
-    }
-}
-    
-    
-module zip_ext_cables()    
-{
-    // ziptie cut for lower cables
-    
-    translate([-10,-25.5,24]) cube([20,2,3]);
-    translate([-4.5,-45.5,24]) cube([2,20,3]);
-    translate([3.5,-45.5,24]) cube([2,20,3]);
-}
-
-
-module cable_holder()
-{    
-    difference()
-    {
-        union()
-        {
-            // base block
-            translate([0.5,-26,24]) rotate([0,0,90]) cylinder( h=39.5, r=5, $fn=30 );
-            translate([-4.5,-26,24]) cube([10,9,39.5]);
-            translate([-3,-35,24]) cube([7,10,39.5]);
-        }
-        
-        // screw 
-        translate([0.5,-27,19.5]) rotate([0,0,90]) cylinder( h=42, r=1.75, $fn=30 );
-        translate([0.5,-27,19.5+41]) rotate([0,0,90]) cylinder( h=5, r=3.15, $fn=30 );
-
-        // upper cables cut
-        translate([0.5,-18,23]) rotate([0,5,90]) cylinder( h=41, r=5, $fn=30 );
-        translate([-10,-20,23]) rotate([-5,0,0]) cube([20,9,45]);
-        
-        // lower angled cut
-        translate([-10,-44,23]) rotate([-4,0,0]) cube([20,9,45]);
-        
-        // wires
-        translate([-0.8,-35,23]) rotate([0,4,90]) cylinder( h=41, r=1.25, $fn=30 );
-        translate([1.8,-35,23]) rotate([0,4,90]) cylinder( h=41, r=1.25, $fn=30 );
-
-
-        // ziptie openings
-        translate([0,0,5]) zip_main();
-        translate([0,0,18]) zip_main();
-        translate([0,0,32]) zip_main();
-        translate([0,0,11]) zip_ext_cables();
-        translate([0,0,25]) zip_ext_cables();
-
-        // round edge cut
-        translate([0,1.8,-1.5])
-        difference()
-        {
-            translate([-10,-32,63]) rotate([0,90,0]) cylinder( h=41, r=4, $fn=30 );
-            translate([-10,-32,63]) rotate([0,90,0]) cylinder( h=41, r=2, $fn=30 );
-            translate([-10,-36,53]) rotate([0,0,0]) cube([20,9,10]);
-            translate([-10,-32,58]) rotate([0,0,0]) cube([20,9,10]);
-        }
-
-    }
-}
-
-cable_holder();
\ No newline at end of file