diff --git a/Printed-Parts/scad/y-rod-holder.scad b/Printed-Parts/scad/y-rod-holder.scad
new file mode 100644
index 0000000..cace961
--- /dev/null
+++ b/Printed-Parts/scad/y-rod-holder.scad
@@ -0,0 +1,76 @@
+// PRUSA iteration4
+// Y holder front
+// GNU GPL v3
+// Josef Průša <iam@josefprusa.cz> and contributors
+// http://www.reprap.org/wiki/Prusa_Mendel
+// http://prusamendel.org
+
+module ziptie_round_edge()
+{
+    difference()
+    {
+        translate([0,0,0]) rotate([90,0,0]) cylinder( h=3.2, r=4, $fn=30 );  
+        translate([0,1,0]) rotate([90,0,0]) cylinder( h=5, r=2, $fn=30 );  
+        translate([-10,-4,0]) cube([20,5,5]);
+        translate([-20,-4,-13]) cube([20,5,20]);
+    }
+}
+
+
+module part()    
+{
+
+    difference()
+    {
+        union()
+        {
+            // body block
+            translate([-13,0,0]) cube([26,10,12]);
+            translate([-4,0,-1.5]) cube([8,10,2]);
+        }
+
+        // y-axis cut
+        translate([0,11,10.5]) rotate([90,0,0]) cylinder( h=14, r=4, $fn=30 );
+        translate([0,11,10.5]) rotate([90,0,0]) cylinder( h=2, r1=4.5, r2=4, $fn=30 );
+        translate([0,1,10.5]) rotate([90,0,0]) cylinder( h=2, r1=4, r2=4.5, $fn=30 );
+        translate([-7,-1,14.5]) rotate([0,45,0]) cube([10,20,10]);
+        translate([0,11,10.5]) rotate([90,0,0]) cylinder( h=1.4, r1=5, r2=4, $fn=30 );
+
+        // screw holes
+        translate([-5.5,9,3.5]) rotate([90,0,0]) cylinder( h=10, r=1.6, $fn=60 );
+        translate([5.5,9,3.5]) rotate([90,0,0]) cylinder( h=20, r=1.6, $fn=60 );
+        translate([-5.5,1,3.5]) rotate([90,0,0]) cylinder( h=2, r1=1.6, r2=2.6, $fn=60 );
+        translate([5.5,1,3.5]) rotate([90,0,0]) cylinder( h=2, r1=1.6, r2=2.6, $fn=60 );
+
+        // ziptie
+        translate([7.8,8.4,9]) ziptie_round_edge();
+        translate([-7.8,5.2,9]) rotate([0,0,180]) ziptie_round_edge();
+        translate([-8.1,5.2,5]) cube([16.2,3.2,2]);
+        translate([0.8,5.2,24.5]) rotate([0,60,0]) cube([20,3.2,2]);
+        translate([-1.8,5.2,26.5]) rotate([0,120,0]) cube([20,3.2,2]);
+
+        // nuts
+        translate([-8.2,1.5,-3.4]) cube([5.6,2.1,10]);
+        translate([2.8,1.5,-3.4]) cube([5.6,2.1,10]);
+        
+        // nut print supports
+        translate([-8.2,1.8,3.5-3.2/2]) cube([5.6,2.1,3.2]);
+        translate([2.8,1.8,3.5-3.2/2]) cube([5.6,2.1,3.2]);
+        translate([-7.1,2.1,3.5-3.2/2]) cube([3.2,2.1,3.2]);
+        translate([3.9,2.1,3.5-3.2/2]) cube([3.2,2.1,3.2]);
+
+
+        // upper corners
+        translate([4,-1,20]) rotate([0,60,0]) cube([20,30,20]);
+        translate([-21.2,-1,30]) rotate([0,120,0]) cube([20,30,20]);
+        translate([-5,-6.4,-2]) cube([10,10,2]);
+        translate([-15,10,-6.5]) rotate([45,0,0]) cube([30,5,5]);
+        translate([-15,3.6,-7.1]) rotate([45,0,0]) cube([30,5,5]);
+
+    }
+}
+
+
+rotate([90,0,0])part();
+
+