diff --git a/Printed-Parts/scad/RAMBo-cover-doors.scad b/Printed-Parts/scad/RAMBo-cover-doors.scad
deleted file mode 100644
index cbfc887..0000000
--- a/Printed-Parts/scad/RAMBo-cover-doors.scad
+++ /dev/null
@@ -1,119 +0,0 @@
-// PRUSA iteration3
-// RAMBo doors
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-module body()
-{
-    // side panels
-    cube( [ 105.5 , 87.5 , 1 ] );  
-    cube( [ 105.5 , 2 , 20 ] );  
-    cube( [ 2 , 87.5 , 20 ] );   
-
-    // corner reinforcement
-    translate( [ 98 , 1 , 0 ] ) cube( [ 7.5 , 5 , 20 ] );   
-    translate( [ 0.5 , 0.5 , 0 ] ) cube( [ 5 , 6.5 , 20 ] );  
-    translate( [ 1 , 0 , 0 ] ) cube( [ 10 , 87.5 , 6 ] );   
-    translate( [ 99.5 , 0 , 0 ] ) cube( [ 6 , 87.5 , 7 ] ); 
-    translate( [ 10 , 0 , 0 ] ) cube( [ 6 , 5 , 6 ] );   
-
-    // screw thread body
-    translate( [ 54 , 2 , 0 ] ) cube( [ 9.5 , 6 , 20 ] ); 
-
-    // rounded side
-    translate( [ 0 , 87.5 , 4.5 ] ) rotate([0,90,0]) cylinder( h = 105.5, r = 4.5, $fn=30);
-
-    // upper hinge reinforcement
-    translate( [ 0.5 , 69 , -9 ] ) rotate([20,0,0]) cube( [ 26 , 20 , 10 ] ); 
-    
-    // door closing
-    translate( [ 4 , 3.5 , 16.8 ] ) rotate([0,0,0]) cylinder( h = 3.2, r1 = 1.8, r2= 3.5, $fn=30);  
-    translate( [ 102 , 3.5 , 16.8 ] ) rotate([0,0,0]) cylinder( h = 3.2, r1 = 1.8, r2= 3.5, $fn=30); 
-}
-
-module ventilation_holes()
-    {
-     for ( i = [0 : 9] ){
-      translate([46 + (i*5.5),10.5,-1]) cube([3.65,19+50,1.2]);
-      translate([46 + (i*5.5),10.5,-1]) cube([3.65,19,10]);
-      translate([46 + (i*5.5),10.5+25,-1]) cube([3.65,19,10]);
-      translate([46 + (i*5.5),10.5+50,-1]) cube([3.65,19,10]);
-    }
-    for ( i = [0 : -6] ){
-      translate([46 + (i*5.5),10.5,-1]) cube([3.65,19+50,1.2]);
-    }
-    for ( i = [-6 : -7] ){
-      translate([46 + (i*5.5),20.5,-1]) cube([3.65,19+40,1.2]);
-    }
-}
-
-module cutouts()
-{
-    // door closing screw
-    translate( [ 58.5 , 4 , 5 ] ) cylinder( h = 17, r = 1.8, $fn=30);  
-    translate( [ 58.5 , 4 , 18.5 ] ) cylinder( h = 2.6, r1 = 1.8, r2=2.2, $fn=30); 
-    translate( [ 58.5 , 4 ,15.5] ){
-    translate( [ 0 , 0 , 2.5 ] ) cube([5.7,3.8,1], center=true);
-    translate( [ 0 , 0 , 3 ] ) cube([3.8,3.8,1], center=true);}
-
-    ventilation_holes();
-    
-    // rounded side cutoff    
-    translate( [ 26.5 , 87.5 , 4.5 ] ) rotate([0,90,0]) cylinder( h = 73, r = 3.5, $fn=30);   
-    translate([ 26.5 ,80,5]) cube([73,19,10]); 
-    translate([ 26.5 ,82.5,1]) cube([73,5,10]); 
-    
-    // upper hinge cut
-    translate( [ 0 , 60 , -10 ] ) cube( [ 30 , 30 , 10 ] );  
-    translate( [ -1 , 87.5 , 0 ] ) cube( [ 22.5 , 10 , 10 ] ); 
-
-    // upper hinge 
-    translate( [2 , 80, 6] ) cube( [ 19.5, 10 , 10 ] );       
-    translate( [-2 , 89.7, 3] ) rotate([70,0,0]) cube( [ 19.5, 10 , 5 ] );     
-    translate( [ -5 , 87.5 , 4.5 ] ) rotate([0,90,0]) cylinder( h = 26.5, r = 2.5, $fn=30);  
-
-    // hinge hole
-    translate( [ -5 , 87.5 , 4.5 ] ) rotate([0,90,0]) cylinder( h = 120, r = 2.6, $fn=30);  
-
-    // door closing 
-    translate( [ 4 , 3.5 , 16.9 ] ) rotate([0,0,0]) cylinder( h = 3.2, r1 = 1.2, r2= 2.8, $fn=30);  
-    translate( [ 102 , 3.5 , 16.9 ] ) rotate([0,0,0]) cylinder( h = 3.2, r1 = 1.2, r2= 2.8, $fn=30);  
-
-    // M3 NUT
-    translate( [55.65 , 0.5, 16] ) cube( [ 5.7, 10 , 2.2 ] );  
-
-    // side panel lightning slot
-    translate( [2 , 10, 3] ) cube( [ 7, 65 , 5 ] );  
-    translate( [101 , 10, 3] ) cube( [ 3, 70 , 5 ] );  
-
-    // corners - cut
-    translate( [53 , 3, 1] ) rotate([0,0,70]) cube( [ 10, 10 , 50 ] );  
-    translate( [61 , 12, 1] ) rotate([0,0,-70]) cube( [ 10, 10 , 50 ] );  
-    translate( [16 , 2, 1] ) rotate([0,0,45]) cube( [ 5, 5 , 50 ] );  
-
-}
-
-module RAMBo_doors()
-{
-difference()
-{
-    body();
-    cutouts();
-    // large corner cut
-    translate( [0 , -20, -3] ) rotate([0,45,45]) cube( [ 30, 30 , 20 ] );  
-    }
-}
- 
-RAMBo_doors();
-    
-    
-    
-    
-    
-    
-    
-    
-    
-