diff --git a/Original_Prusa_i3_MK2S_to_MK3_upgrade_Parts_list.txt b/Original_Prusa_i3_MK2S_to_MK3_upgrade_Parts_list.txt
deleted file mode 100644
index c4a7496..0000000
--- a/Original_Prusa_i3_MK2S_to_MK3_upgrade_Parts_list.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-Original Prusa i3 MK2S to Original Prusa i3 MK3 upgrade
-
-ATTENTION: Before printing the parts, check the version of the heatbed you have in your package. There are two versions with different cable cover.
-Soldered power cable - old design, use "MK3_Black_parts_PETG...soldered.gcode" or respective parts labeled "old".
-Not soldered power cable - new design, use "MK3_Black_parts_PETG...notsoldered.gcode" or respective part labeled "new".
-G-codes can be downloaded here: https://www.prusa3d.com/downloads/others/mk3_upgrade_gcodes.zip
-
-Recommended print settings:
-0.2 mm layer height, infill 20% GRID, no supports and material PETG, only exception is nozzle-fan, which must be from ABS!
-
-Orange parts bundle (parts can be also printed in black):
-X-end-motor (1x)	https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/x-end-motor.stl
-X-end-idler (1x)	https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/x-end-idler.stl
-Y-rod-holder (4x)	https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/y-rod-holder.stl
-Y-motor-holder (1x)	https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/y-motor-holder.stl
-Y-belt-holder (1x)	https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/y-belt-holder.stl
-Y-belt-idler (1x)	https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/y-belt-idler.stl
-Z-axis-top (1x) 	https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/z-axis-top.stl
-Z-axis-bottom (1x) 	https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/z-axis-bottom.stl
-LCD-supports (1x)	https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/lcd-supports.stl
-nozzle-fan-45deg (1x)	https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/nozzle-fan-45deg.stl
-nozzle-fan-45deg-support (1x) 	https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/nozzle-fan-45deg-support.stl
-
-
-Black parts bundle (Extruder parts MUST BE printed in BLACK):
-X-carriage* (1x)		https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/x-carriage.stl
-X-carriage-back* (1x)		https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/x-carriage-back.stl     
-Cable-holder* (1x)		https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/cable-holder.stl
-Extruder-body* (1x)		https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/extruder-body.stl
-Extruder-cover* (1x)		https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/extruder-cover.stl
-Extruder-idler-plug* (1x)	https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/extruder-idler-plug.stl
-Extruder-idler* (1x)		https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/extruder-idler.stl
-Filament-sensor-cover* (1x)	https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/filament-sensor-cover.stl
-Heatbed-cable-cover-new** (1x)	https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/heatbed-cable-cover.stl
-Heatbed-cable-cover-old*** (1x)	https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/heatbed-cable-cover-no-screw.stl
-Einsy-base (1x)			https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/Einsy-base.stl
-Extruder-cable-clip.stl (1x)	https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/Extruder-cable-clip.stl
-Heatbed-cable-clip.stl (1x)	https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/Heatbed-cable-clip.stl
-Einsy-doors (1x)		https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/Einsy-doors.stl
-Einsy-hinges (1x) 		https://raw.githubusercontent.com/prusa3d/Original-Prusa-i3/MK3/Printed-Parts/stl/Einsy-hinges.stl
-
-License GNU GPL v3
-https://www.prusa3d.com/prusa-i3-printable-parts/
-
-* Extruder parts MUST BE printed in BLACK.
-** Use this part for heatbed WITHOUT soldered power cable.
-*** Use these parts for heatbed WITH soldered power cable.