diff --git a/Printed-Parts/scad/cable-holder.scad b/Printed-Parts/scad/cable-holder.scad
deleted file mode 100644
index 4c12fab..0000000
--- a/Printed-Parts/scad/cable-holder.scad
+++ /dev/null
@@ -1,76 +0,0 @@
-// PRUSA iteration3
-// Cable holder
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-module cable_holder()
-{
-    
-    difference()
-    {
-    
-    union()
-    {
-        // body
-        translate([-21.1,3,35]) cube([2.5,13,13]);
-        difference()
-        {
-        translate([-21.1,3,35]) rotate([-15,0,0]) cube([2.5,7,35]);
-        rotate([-15,0,0]) translate([-21,0,38]) rotate([0,0,45]) cube([2.5,2.5,35]);
-        }
-        
-        //round reinforcement
-        difference()
-        {
-        translate([-21.1,16,50]) rotate([0,90,0])cylinder(r=4, h=2.5, $fn=50); 
-        translate([-22,16,50]) rotate([0,90,0])cylinder(r=1.7, h=4, $fn=50); 
-
-        translate([-21.6,16,45]) cube([4,10,10]);        
-        translate([-21.6,12,50]) cube([4,10,10]);        
-            
-        }
-    }
-    
-    // side angle cut
-    translate([-22,-1.5,38]) rotate([-11,0,0]) cube([5,7,45]);
-    
-    // side cut
-    translate([-22,-2,33]) cube([8,8,12]);
-
-    // angled side cut
-    rotate([-15,0,0]) translate([-18,-8,39]) rotate([0,0,45]) cube([3.5,2.5,35]);
-    
-    //zipties
-    translate([-25,15,42]) rotate([0,0,-45]) cube([3,10,3]);
-    translate([-20,2,42]) rotate([0,0,45]) cube([3,10,3]);
-    translate([-25,15,36]) rotate([0,0,-45]) cube([3,10,3]);
-    translate([-20,2,36]) rotate([0,0,45]) cube([3,10,3]);
-    
-    // M3 screw
-    translate([-18.5,11,19]) rotate([0,0,0])cylinder(r=1.52, h=23, $fn=50); 
-    translate([-18.5,11,42]) rotate([0,0,0])cylinder(r=3, h=3, $fn=50);     
-    
-    // bottom cut
-    translate([-21.6,-9,25]) cube([4,26,10]);
-    
-    
-    //selective infill
-    translate([-20.8,11.5,46]) rotate([-15,0,0]) cube([2,0.4,10]);
-    translate([-20.8,10,46]) rotate([-15,0,0]) cube([2,0.4,18]);
-    translate([-20.8,8.5,46]) rotate([-15,0,0]) cube([2,0.4,10]);
-    
-    }
-    
-    
-    
-    
-       
-}
-
- 
- 
-
-cable_holder();
-translate([0,40,0]) rotate([0,180,180]) mirror([0,0,1]) cable_holder();
\ No newline at end of file