From da78c264a0809afd3056e6d4e8646ae7060ffb4d Mon Sep 17 00:00:00 2001
From: akukan <akukan@outlook.com>
Date: Thu, 14 Dec 2017 15:18:27 +0100
Subject: [PATCH] Delete Rambo-Hinges.scad

---
 Printed-Parts/stl/Rambo-Hinges.scad | 50 -----------------------------
 1 file changed, 50 deletions(-)
 delete mode 100644 Printed-Parts/stl/Rambo-Hinges.scad

diff --git a/Printed-Parts/stl/Rambo-Hinges.scad b/Printed-Parts/stl/Rambo-Hinges.scad
deleted file mode 100644
index 39e2bad..0000000
--- a/Printed-Parts/stl/Rambo-Hinges.scad
+++ /dev/null
@@ -1,50 +0,0 @@
-// PRUSA iteration4
-// RAMBo cover hinges
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-module upper_hinge()
-{
-difference()    
-    {
-        union()
-        {
-             // body
-             cylinder( h = 26, r = 2.4, $fn=30); 
-             cylinder( h = 21, r = 4.5, $fn=30); 
-             translate([0,0,26]) cylinder( h = 2, r1 = 2.4, r2 = 1.8, $fn=30); 
-             translate( [ -5 , -11 , 0 ] ) cube( [ 7 , 14 , 21 ] );  
-        }
-        // M3 screw hole
-        translate( [ -12.5 , -0 , 17 ] ) rotate( [0,90,0] ) cylinder( h = 20, r = 1.75, $fn=30);  
-        translate( [ -1.5 , -0 , 17 ] ) rotate( [0,90,0] ) cylinder( h = 9, r = 3, $fn=30); 
-        // angle cut
-        translate([-3.9,-20,-1]) rotate([0,0,50]) cube([25,5,26]);   
-    }
-}
-
-module lower_hinge()
-{
-difference()
-    {   
-        union()
-        { 
-            // body   
-            translate( [ 0 , 6 , 0 ] ) cylinder( h = 15, r = 2.4, $fn=30); 
-            translate( [ 0 , 6 , 0 ] ) cylinder( h = 10, r = 4.5, $fn=30);  
-            translate( [ 0 , 6 , 15 ] ) cylinder( h = 2, r1 = 2.4, r2=1.8, $fn=30);  
-            translate( [ -5 , 3 , 0 ] ) cube( [ 7 , 13 , 10 ] ); 
-        }
-        // M3 screw
-        translate( [ -0.5 , 6 , 4 ] ) rotate( [0,90,0] ) cylinder( h = 20, r = 3, $fn=30); 
-        translate( [ -12 , 6 , 4 ] ) rotate( [0,90,0] ) cylinder( h = 20, r = 1.75, $fn=30); 
-        // angle cut
-        translate([-5.8,20,-1]) rotate([0,0,-50]) cube([20,5,20]);   
-    }
-}
-
-
-translate([0,-4,0]) upper_hinge();
-lower_hinge();
\ No newline at end of file