extruder cable clip for new Einsy_base

Printed-Parts/scad/Extruder-cable-clip.scad

@@ -0,0 +1,58 @@
+// PRUSA iteration4
+// Extruder cable clip
+// GNU GPL v3
+// Josef Průša <iam@josefprusa.cz> and contributors
+// http://www.reprap.org/wiki/Prusa_Mendel
+// http://prusamendel.org
+
+module extruder_cable_clip()
+{
+        
+    difference(){
+    difference()
+    {
+        union()
+        {
+            // body shape
+            translate([-6,28,28]) rotate([0,90,0]) cylinder(h=6,r=13.5,$fn=30);  
+            translate([-10,28,28]) rotate([0,90,0]) cylinder(h=4,r1=8.5,r2=13.5, $fn=30);  
+            translate([0,16.6,28]) cube([2.9,22.8,7]); 
+        }
+        
+        // bottom cut and shape
+        translate([-15,7,13]) cube([30,40,15]); 
+        translate([-20,28,28]) rotate([0,90,0]) cylinder(h=40,r=6, $fn=30);
+        
+        // screws
+        translate([-2.7,19.5,25]) rotate([0,0,90]) cylinder(h= 10, r = 1.6, $fn=50); 
+        translate([-2.7,36.5,25]) rotate([0,0,90]) cylinder( h = 10, r = 1.6, $fn=50); 
+        translate([-2.7,36.5,32]) rotate([0,0,90]) cylinder( h = 13, r = 3.1, $fn=30);
+        translate([-2.7,19.5,32]) rotate([0,0,90]) cylinder( h = 13, r = 3.1, $fn=30); 
+        
+        // screw heads opening
+        translate([-2.7,16.4,35]) cube([10,6.2,15]); 
+        translate([-2.7,33.4,35]) cube([10,6.2,15]); 
+        
+        
+    }
+    
+    difference()
+    {
+        // cable grip
+        translate([-8,28,28]) rotate([0,90,0]) cylinder( h = 10, r = 6, $fn=30);
+        translate([-20,28,28]) rotate([0,90,0]) cylinder( h = 40, r = 5.5, $fn=30);
+        translate([-15,7,13]) cube([30,40,15]); 
+        translate([-6,7,13]) cube([2,40,25]); 
+        translate([-2,7,13]) cube([2,40,25]); 
+        
+    }
+    
+    
+    //nylon hole
+        
+        translate([-3,28,28]) rotate([35,90,0]) cylinder( h = 24,r = 1.8,$fn=30);}}
+
+
+//translate([0,0,0]) extruder_cable_clip();
+
+translate([6,-28,-28]) extruder_cable_clip();