diff --git a/Printed-Parts/scad/y-belt-idler.scad b/Printed-Parts/scad/y-belt-idler.scad
deleted file mode 100644
index 4dff7dd..0000000
--- a/Printed-Parts/scad/y-belt-idler.scad
+++ /dev/null
@@ -1,63 +0,0 @@
-// PRUSA iteration4
-// Y belt idler
-// GNU GPL v3
-// Josef Průša <iam@josefprusa.cz> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-module Y_belt_idler()
-{
-    difference()
-    { 
-        // base block
-        translate([-12.5,-20,5]) cube([25,20,35]);
-        translate([-4.75,-27,-1]) cube([9.5,20,50]); 
-        
-        // angled front side   
-        translate([-15,-19.5,-15]) rotate([37,0,0]) cube([30,20,40]); 
-        translate([-15,-12,-15]) rotate([60,0,0]) cube([30,20,40]); 
-        translate([-15,-20,29.5]) rotate([38,0,0]) cube([30,20,20]); 
-
-        // screws
-        translate([0,1,36]) rotate([90,0,0]) cylinder( h=25, r=1.65, $fn=30 ); 
-        translate([0,-2,36]) rotate([90,0,0]) cylinder( h=6, r=3.2 , $fn=6 ); 
-        translate([0,1,10]) rotate([90,0,0]) cylinder( h=25, r=1.65, $fn=30 ); 
-        translate([0,-2,10]) rotate([90,0,0]) cylinder( h=6, r=3.2 , $fn=6 ); 
-        translate([0,-5,36]) rotate([90,0,0]) cylinder( h=6, r=3.2 , r2=3.9, $fn=6 ); 
-        translate([0,-5,10]) rotate([90,0,0]) cylinder( h=6, r=3.2 , r2=3.9, $fn=6 );
-        translate([0,1,36]) rotate([90,0,0]) cylinder( h=2, r=2.5, r2=1.65,$fn=30 ); 
-        translate([0,1,10]) rotate([90,0,0]) cylinder( h=2, r=2.5, r2=1.65,$fn=30 ); 
-        
-        // pulley cut
-        translate([-5,-14,22.5]) rotate([0,90,0]) cylinder( h=10, r=10, $fn=30 ); 
-           
-        // pulley screw axis 
-        translate([-13.5,-14,22.5]) rotate([0,90,0]) cylinder( h=30, r=1.6, $fn=30 ); 
-        translate([-14,-14,22.5]) rotate([0,90,0]) cylinder( h=7, r=3.2, $fn=6 ); 
-        translate([-14,-14,22.5]) rotate([0,90,0]) cylinder( h=4, r2=3.2, r1=4, $fn=6 ); 
-        translate([8,-14,22.5]) rotate([0,90,0]) cylinder( h=6, r=3.2, $fn=30 ); 
-        
-        // selective infill
-        translate([-10,-18,18]) cube([3,17,0.5]);
-        translate([8,-18,18]) cube([3,17,0.5]);
-        translate([-10,-18,27]) cube([3,17,0.5]);
-        translate([8,-18,27]) cube([3,17,0.5]);
-        translate([-10,-17,16]) cube([3,15,0.5]);
-        translate([8,-17,16]) cube([3,15,0.5]);
-        translate([-10,-16,29]) cube([3,15,0.5]);
-        translate([8,-16,29]) cube([3,15,0.5]);
-        translate([-8,-2,30]) cube([16,1,0.5]);
-        translate([-8,-2,13]) cube([16,1,0.5]);
-        
-        // upper side mark
-        translate([8.5,-3.5,39]) rotate([0,0,0]) cylinder( h=2, r=1.5, $fn=30 ); 
-        
-        //version   
-        translate([3.5,-0.5,20]) rotate([90,0,180]) linear_extrude(height = 0.6) 
-        { text("R1",font = "helvetica:style=Bold", size=4, center=true); }
-    }
-    
-}   
-    
-rotate([-90,0,0]) Y_belt_idler(); 
-