From f71a3e3662c8807a59a110bb4044431a4c732c08 Mon Sep 17 00:00:00 2001
From: akukan <akukan@outlook.com>
Date: Thu, 21 Sep 2017 15:12:25 +0200
Subject: [PATCH] PINDA probe mount changed to one screw

---
 Printed-Parts/scad/extruder-body.scad | 49 +++++++++++++++------------
 1 file changed, 27 insertions(+), 22 deletions(-)

diff --git a/Printed-Parts/scad/extruder-body.scad b/Printed-Parts/scad/extruder-body.scad
index 77c3f92..a81fac6 100644
--- a/Printed-Parts/scad/extruder-body.scad
+++ b/Printed-Parts/scad/extruder-body.scad
@@ -26,7 +26,7 @@ module ext_body(){
        extruder_mount_holes();
         
         // PINDA entry hole
-        translate([-5.5,37,6])rotate([90,0,0])cylinder(r=4.4, h=4, $fn=20); 
+        translate([-5.5,37,6])rotate([90,0,0])cylinder(r=4.4, h=40, $fn=20); 
     }
     
 }
@@ -34,7 +34,7 @@ module ext_body(){
     
 difference()
 {
-ext_body();
+    ext_body();
     
     // remove old pinda
     translate([-20,26,-2]) cube([20,30,30]);
@@ -48,6 +48,13 @@ ext_body();
     // M3 nuts 
     translate([0,46,9]) m3nut();
     translate([0,37,9]) m3nut();
+    
+    translate([0,42,9]) m3nut();
+    translate([2,45,11.5])rotate([0,90,0])cylinder(r=1.6, h=3, $fn=20); 
+    translate([2,45,12])rotate([0,90,0])cylinder(r=1.6, h=3, $fn=20); 
+    translate([2,45,12.5])rotate([0,90,0])cylinder(r=1.6, h=3, $fn=20); 
+    translate([-20,45,12])rotate([0,90,0])cylinder(r=1.6, h=25, $fn=20);
+    
 }
 
 module ex_body()
@@ -60,15 +67,20 @@ difference()
     {    
         // body
         // round body
-        translate([-5.5,36.5,6])rotate([-90,0,0])cylinder(r=8.5, h=19, $fn=20);
+        translate([-5.5,35.5,6])rotate([-90,0,0])cylinder(r=8.5, h=20, $fn=20);
         // body block
-        translate([-13,36.5,5]) cube([17,19,10]);
-        translate([-13,36.5,15]) cube([5,19,1]);
+        translate([-13,35.5,5]) cube([17,20,10]);
+        translate([-13,35.5,15]) cube([5,20,1]);
         
         // extruder body joint
         translate([-0,33.5,0]) cube([3,2,15]);
         translate([0,34,0]) cube([4,3,15]);
         translate([0,35.5,0]) rotate([0,0,45]) cube([2,2,15]);
+        
+        // m3 nut lock
+     #translate([32.5,6.5,14])rotate([0,45,0]) cube([1,7,1], center=true);
+     #translate([26.5,6.5,14])rotate([0,45,0]) cube([1,7,1], center=true);
+
     }   
 
 
@@ -76,30 +88,23 @@ difference()
     translate([-5.5,50,6])rotate([-90,0,0])cylinder(r=4.1, h=40, $fn=20);
 
     // M3 screws 
-    translate([-20,49,12])rotate([0,90,0])cylinder(r=1.5, h=24, $fn=20);    
-    translate([-20,40,12])rotate([0,90,0])cylinder(r=1.5, h=24, $fn=20);    
-    translate([-14,49,12])rotate([0,90,0])cylinder(r=3, h=5, $fn=20);    
-    translate([-14,40,12])rotate([0,90,0])cylinder(r=3, h=5, $fn=20);   
-
-    // lower M3 screw end opening
-    translate([2,49,11.5])rotate([0,90,0])cylinder(r=1.5, h=3, $fn=20);    
-    translate([2,49,12])rotate([0,90,0])cylinder(r=1.5, h=3, $fn=20);    
-    translate([2,49,12.5])rotate([0,90,0])cylinder(r=1.5, h=3, $fn=20);    
+    //#translate([-20,49,12])rotate([0,90,0])cylinder(r=1.6, h=24, $fn=20);    
+    translate([-20,45,12])rotate([0,90,0])cylinder(r=1.6, h=25, $fn=20);    
+    translate([-14,45,12])rotate([0,90,0])cylinder(r=3, h=5, $fn=20);   
 
     // upper M3 screw end opening
-    translate([2,40,11.5])rotate([0,90,0])cylinder(r=1.5, h=3, $fn=20); 
-    translate([2,40,12])rotate([0,90,0])cylinder(r=1.5, h=3, $fn=20); 
-    translate([2,40,12.5])rotate([0,90,0])cylinder(r=1.5, h=3, $fn=20); 
+    translate([2,45,11.5])rotate([0,90,0])cylinder(r=1.6, h=3, $fn=20); 
+    translate([2,45,12])rotate([0,90,0])cylinder(r=1.6, h=3, $fn=20); 
+    translate([2,45,12.5])rotate([0,90,0])cylinder(r=1.6, h=3, $fn=20); 
     
     // M3 nuts opening
-    translate([0,46,9]) m3nut();
-    translate([0,37,9]) m3nut();
+    translate([0,42,9]) m3nut();
 
     // flat bottom side
     translate([-20,33,-10]) cube([30,35,10]);
 
     // slot
-    translate([-6,33,8]) cube([1,25,10]);
+    translate([-6,33,8]) cube([1.3,25,10]);
 
     // 45 / 30 deg edges 
     translate([-15,32,12]) rotate([45,0,0]) cube([15,10,10]);
@@ -109,7 +114,7 @@ difference()
     translate([7,46,-1]) rotate([0,0,30]) cube([15,11,25]);
 
     //PINDA mounting hole
-    translate([-5.5,60,6])rotate([90,0,0])cylinder(r=4.2, h=30, $fn=20); 
+    translate([-5.5,60,6])rotate([90,0,0])cylinder(r=4.2, h=60, $fn=20); 
     translate([-5.5,41,6])rotate([90,0,0])cylinder(r=4.4, h=5, $fn=20); 
 
     // bottom cut
@@ -126,4 +131,4 @@ difference()
 
 }
 
-ex_body();
\ No newline at end of file
+ex_body();