Missing version info added

Increase the R6 version number

Printed-Parts/SCAD/LCD-cover-ORIGINAL-MK3.scad

@@ -14,10 +14,10 @@ module main_body()
         {
             // main body
             translate( [ -77 , -4.5 , 0 ] ) cube( [ 155 , 59.8 , 2 ] ); 
-            translate( [ -77 , -4.5 , 0 ] ) rotate([35,0,0]) cube( [ 155 , 2 , 20.08 ] );
+            translate( [ -77 , -4.5 , 0 ] ) rotate([35,0,0]) cube( [ 155 , 3 , 20.08 ] );
             translate( [ -77 , -3.5 , -1 ] ) rotate([35,0,0]) cube( [ 7 , 5 , 15 ] );
             translate( [ 71 , -3.5 , -1 ] ) rotate([35,0,0]) cube( [ 7 , 5 , 15 ] );
-            translate( [ -77 , -14.7 , 14.2 ] )  cube( [ 155 , 2 , 11.8 ] );
+            translate( [ -77 , -15.2 , 14.2 ] )  cube( [ 155 , 3.1 , 11.8 ] );
             translate( [ -77 , 54 , 0 ] ) cube( [ 155 , 2 , 17 ] );
             
             // M3 hole body
@@ -27,25 +27,14 @@ module main_body()
         
         // LCD window
         translate( [ -61.5 , 1 , 1.2 ] ) cube( [ 98.5 , 42 , 10 ] ); 
-        translate( [ -54.5 , 8 , -1 ] ) cube( [ 85 , 30.5 , 10 ] );  
+        translate( [ -52.5 , 8 , -1 ] ) cube( [ 80 , 30.5 , 10 ] );  
-
+        
-        // buzzer holes
+        for(buzz = [55 : 2 : 67])
-        translate( [ 55 , 1.5 , -1 ] ) cube( [ 1.3 , 4 , 10 ] );  
+        {
-        translate( [ 57 , 1.5 , -1 ] ) cube( [ 1.3 , 4 , 10 ] );  
+            translate([buzz,1.5,-1]) cube([1.3,4,10]);
-        translate( [ 59 , 1.5 , -1 ] ) cube( [ 1.3 , 4 , 10 ] );  
+            translate([buzz-0.75,1.5,-0.5]) rotate([0,45,0]) cube([2,4,2]);  
-        translate( [ 61 , 1.5 , -1 ] ) cube( [ 1.3 , 4 , 10 ] );  
+            if(buzz<67) translate([buzz+1.25,1.5,-0.5]) rotate([0,45,0]) cube([2,4,2]);  
-        translate( [ 63 , 1.5 , -1 ] ) cube( [ 1.3 , 4 , 10 ] );  
+        }
-        translate( [ 65 , 1.5 , -1 ] ) cube( [ 1.3 , 4 , 10 ] );  
-        translate( [ 67 , 1.5 , -1 ] ) cube( [ 1.3 , 4 , 10 ] );  
-
-        // buzzer holes corners
-        translate( [ 66.25 , 1.5 , -0.5 ] ) rotate([0,45,0]) cube( [ 2 , 4 , 2 ] );  
-        translate( [ 64.25 , 1.5 , -0.5 ] ) rotate([0,45,0]) cube( [ 2 , 4 , 2 ] );  
-        translate( [ 62.25 , 1.5 , -0.5 ] ) rotate([0,45,0]) cube( [ 2 , 4 , 2 ] );  
-        translate( [ 60.25 , 1.5 , -0.5 ] ) rotate([0,45,0]) cube( [ 2 , 4 , 2 ] );  
-        translate( [ 58.25 , 1.5 , -0.5 ] ) rotate([0,45,0]) cube( [ 2 , 4 , 2 ] );  
-        translate( [ 56.25 , 1.5 , -0.5 ] ) rotate([0,45,0]) cube( [ 2 , 4 , 2 ] );  
-        translate( [ 54.25 , 1.5 , -0.5 ] ) rotate([0,45,0]) cube( [ 2 , 4 , 2 ] );  
 
         // knob hole
         translate( [ 62.5 , 21 , -1 ] ) cylinder( h = 10, r = 6, $fn=30);
@@ -62,10 +51,17 @@ module main_body()
         translate( [ 48.7 , 27.8 , -1 ] ) rotate([0,0,45]) cube( [ 3.55 , 1 , 9 ] );
 
         // rear support cutout
-        translate( [ -64.5 , -12.7 , 14 ] ) cube( [ 10 , 3 , 16 ] );  
+        translate( [ -64.5 , -12.1 , 14 ] ) cube( [ 10 , 3 , 16 ] );  
-        translate( [ 55.5 , -12.7 , 14 ] ) cube( [ 10 , 3 , 16 ] );  
+        translate( [ 55.5 , -12.1 , 14 ] ) cube( [ 10 , 3 , 16 ] );  
 
     }
+    
+    difference()
+    {
+        translate([-70,55.5,-2]) rotate([55,0,0]) cube([120,5,5]);  
+        translate([-100,40,-9.5]) cube([200,50,10]); 
+        
+    }
 }
 
 module pcb_clip()
@@ -145,7 +141,7 @@ difference()
     translate( [ -80 , 9 , 16.5 ] ) cube( [ 10 , 28 , 4.5 ] );  
 
     // front and rear angle
-    translate( [ -81 , -9.3 , -17 ] ) rotate([35,0,0]) cube( [ 164 , 14 , 54.08 ] );  
+    translate( [ -81 , -10.5 , -17 ] ) rotate([32,0,0]) cube( [ 164 , 14 , 54.08 ] );  
     translate( [ -78 , 72.7 , -3 ] ) rotate([45,0,0]) cube( [ 160 , 14 , 54.08 ] );  
 
     // M3 screw thread
@@ -164,37 +160,42 @@ difference()
     translate( [ -21 , 41.3 , -0.4 ] ) cylinder( h = 1, r = 0.8, $fn=30);  
 
     // front cleanup
-    translate( [ -100 , -64 , 0 ] ) cube( [ 200 , 50 , 50 ] ); 
+    translate( [ -100 , -64.6 , 0 ] ) cube( [ 200 , 50 , 50 ] ); 
 
     // X sign on reset button
     translate( [ 63 , 34 , -1 ] ) rotate([0,0,45]) cube( [ 2, 8, 2 ] );  
     translate( [ 57.5 , 35.5 , -1 ] ) rotate([0,0,-45]) cube( [ 2, 8, 2 ] );  
 
     // corners
-    translate( [ 73 , -5 , -1 ] ) rotate([0,45,0]) cube( [ 7, 80, 7 ] );  
+    translate([74.05,-5,-2.7]) rotate([0,35,0]) cube([7,80,7]);  
-    translate( [ -82 , -5 , -1 ] ) rotate([0,45,0]) cube( [ 7, 80, 7 ] );  
+    translate([-82.8,-5,-1]) rotate([0,55,0]) cube([7,80,7]);  
-
+    translate( [ -82 , 58.5 , -5 ] ) rotate([55,0,0]) cube( [ 200, 7, 7 ] );  
-    translate( [ -82 , 58 , -5 ] ) rotate([45,0,0]) cube( [ 200, 7, 7 ] );  
     translate( [ -77 , 51 , -4 ] ) rotate([0,0,45]) cube( [ 8, 8, 50 ] );  
     translate( [ 78 , 51 , -4 ] ) rotate([0,0,45]) cube( [ 8, 8, 50 ] );  
     translate( [ 78 , -19 , -4 ] ) rotate([0,0,45]) cube( [ 5, 5, 50 ] );  
     translate( [ -77 , -19 , -4 ] ) rotate([0,0,45]) cube( [ 5, 5, 50 ] );  
 
     // LCD corners
-    translate( [ -54.5 , 9.5 , -5.2 ] ) rotate([45,0,0]) cube( [ 85 , 5 , 5 ] );  // LCD window
+    translate( [ -52.5 , 9.5 , -5.2 ] ) rotate([45,0,0]) cube( [ 80 , 5 , 5 ] );  // LCD window
-    translate( [ -54.5 , 37 , -5.2 ] ) rotate([45,0,0]) cube( [ 85 , 5 , 5 ] );  // LCD window
+    translate( [ -52.5 , 37 , -5.2 ] ) rotate([45,0,0]) cube( [ 80 , 5 , 5 ] );  // LCD window
-    rotate([35,0,0]) translate( [ -78 , -8 , -4 ] ) rotate([0,0,45]) cube( [ 6, 6, 50 ] );  
+    rotate([32,0,0]) translate( [ -78 , -9.1 , -4 ] ) rotate([0,0,45]) cube( [ 6, 6, 50 ] );  
-    rotate([35,0,0]) translate( [ 79 , -8 , -4 ] ) rotate([0,0,45]) cube( [ 6, 6, 50 ] );  
+    rotate([32,0,0]) translate( [ 79 , -9.1 , -4 ] ) rotate([0,0,45]) cube( [ 6, 6, 50 ] );  
     translate( [ -100 , -40 , -50 ] ) cube( [ 200 , 50 , 50 ] ); 
 
+
     // version
     translate([-73,15,4]) rotate([90,0,90]) linear_extrude(height = 2) 
-    { text("R2",font = "helvetica:style=Bold", size=7, center=true); }
+    { text("R7",font = "helvetica:style=Bold", size=7, center=true); }
-    
+  
-    
+
 }
 
-// print support for SD card opening
+// SD card window support
 translate( [ -76.5 , 15 , 16.70 ] ) cube( [ 1 , 5 , 4.1 ] );
 translate( [ -76.5 , 25 , 16.70 ] ) cube( [ 1 , 5 , 4.1 ] );
+     
+    
 
+
+    
+ 

Printed-Parts/SCAD/bearing.scad

@@ -42,28 +42,63 @@ module horizontal_bearing_holes(bearings=1){
  
 }
  
-module horizontal_bearing_holes_nozip(bearings=1){
+module horizontal_bearing_holes_nozip(bearings=1)
- cutter_lenght = 10+bearings*25;
+{
- one_holder_lenght = 8+25;
+	cutter_lenght = 10+bearings*25;
- holder_lenght = 8+bearings*25;
+	one_holder_lenght = 8+25;
- 
+	holder_lenght = 8+bearings*25;
- // Main bearing cut
- difference(){
-  translate(v=[0,0,12]) rotate(a=[90,0,0]) translate(v=[0,0,-cutter_lenght/2]) cylinder(h = cutter_lenght, r=(bearing_diameter/2)+0.2, $fn=50);
-  // Bearing retainers
-  translate(v=[0,1-holder_lenght/2,3]) cube(size = [24,6,8], center = true);
-  translate(v=[0,-1+holder_lenght/2,3]) cube(size = [24,6,8], center = true);
- }
  
+	 // Main bearing cut
+	 difference()
+		{
+		  	translate(v=[0,0,12]) rotate(a=[90,0,0]) translate(v=[0,0,-cutter_lenght/2]) cylinder(h = cutter_lenght, r=(bearing_diameter/2)+0.2, $fn=50);
+			// Bearing retainers
+			translate(v=[0,1-holder_lenght/2,3]) cube(size = [24,6,8], center = true);
+			translate(v=[0,-1+holder_lenght/2,3]) cube(size = [24,6,8], center = true);
+ 		}
 }
 
+module horizontal_bearing_holes_nozip_smooth(bearings=1)
+{
+	cutter_lenght = 10+bearings*25;
+	one_holder_lenght = 8+25;
+	holder_lenght = 8+bearings*25;
+ 
+	 // Main bearing cut
+	 difference()
+		{
+		  	translate(v=[0,0,12]) rotate(a=[90,0,0]) translate(v=[0,0,-cutter_lenght/2]) cylinder(h = cutter_lenght, r=(bearing_diameter/2)+0.2, $fn=150);
+			// Bearing retainers
+			translate(v=[0,1-holder_lenght/2,3]) cube(size = [24,6,8], center = true);
+			translate(v=[0,-1+holder_lenght/2,3]) cube(size = [24,6,8], center = true);
+ 		}
+}
+
+module horizontal_bearing_holes_smooth_nozip(bearings=1)
+{
+	cutter_lenght = 10+bearings*25;
+	one_holder_lenght = 8+25;
+	holder_lenght = 8+bearings*25;
+ 
+	 // Main bearing cut
+	 difference()
+		{
+		  	translate(v=[0,0,12]) rotate(a=[90,0,0]) translate(v=[0,0,-cutter_lenght/2]) cylinder(h = cutter_lenght, r=(bearing_diameter/2)+0.2, $fn=120);
+			// Bearing retainers
+			translate(v=[0,1-holder_lenght/2,3]) cube(size = [24,6,8], center = true);
+			translate(v=[0,-1+holder_lenght/2,3]) cube(size = [24,6,8], center = true);
+ 		}
+}
+
+
+
 
 thinwall = 3;
 bearing_size = bearing_diameter + 2 * thinwall;
 
 module vertical_bearing_base(){
  translate(v=[-2-bearing_size/4,0,29]) cube(size = [4+bearing_size/2,bearing_size,58], center = true);
- cylinder(h = 58, r=bearing_size/2, $fn = 90);
+ cylinder(h = 58, r=bearing_size/2, $fn = 250);
 }
 
 module vertical_bearing_holes(){

Printed-Parts/SCAD/x-carriage-back.scad

@@ -40,11 +40,15 @@ module x_carriage_back()
         translate([-20,-19.5,9]) cube([50,7.5,10]);
         
         // bearings
-        translate([-15,-25,11.75]) rotate([0,90,0]) cylinder( h=31, r=7.6, $fn=30 );
+        translate([-15,-25,11.75]) rotate([0,90,0]) cylinder( h=31, r=7.6, $fn=150 );
-        translate([-30,20,11.75]) rotate([0,90,0]) cylinder( h=60, r=7.6, $fn=30 );
+        translate([-30,20,11.75]) rotate([0,90,0]) cylinder( h=60, r=7.6, $fn=150 );
         translate([-17,-25,11.75]) rotate([0,90,0]) cylinder( h=60, r=7, $fn=30 );
         translate([-32,20,11.75]) rotate([0,90,0]) cylinder( h=80, r=7, $fn=30 );
       
+        translate([-15,-25-2,18]) cube([30,4,2]);
+        translate([-30,20-2,18]) cube([60,4,2]);
+
+
         // hold together screws
         translate([-5,-36,10]) rotate([0,0,0]) cylinder( h=50, r=1.65, $fn=50 );
         translate([1,4,10]) rotate([0,0,0]) cylinder( h=50, r=1.65, $fn=50 );
@@ -76,7 +80,7 @@ module x_carriage_back()
             }
         // cable holder screw
         translate([0.5,-27,11]) rotate([0,0,90]) cylinder( h=40, r=1.6, $fn=30 );
-        translate([0.5,-27,16.5]) rotate([0,0,0]) cylinder( h=5, r=3.1, $fn=6 );
+        translate([0.5,-27,16.75]) rotate([0,0,0]) cylinder( h=5, r=3.1, $fn=6 );
         
         // x-carriage screws in belt holders
         translate([-11.5,-0.5,10]) rotate([0,0,90]) cylinder( h=40, r=3, $fn=30 );
@@ -129,11 +133,7 @@ module x_carriage_back()
         // inner cable cleanup
         translate([-1,-19.5,14]) rotate([0,30,0]) cube([10,7.5,10]);
         translate([-5,-19.5,10]) rotate([0,-30,0]) cube([10,7.5,10]);
-        
+       
-        // version
-        translate([-13,-30,22.5]) rotate([0,0,0]) linear_extrude(height = 0.75) 
-        { text("R4",font = "helvetica:style=Bold", size=6, center=true); }
-        
 
         // upper ziptie left
         translate([-21.5,-25,0])difference()
@@ -165,6 +165,12 @@ module x_carriage_back()
         translate([5,-8,16]) cube([0.5,20,6.5]);
         translate([-3.25,-8,16]) cube([0.5,20,6.5]);
         translate([0.75,-8,16]) cube([0.5,7,6.5]);
+
+				// version
+        translate([-12,-29,22.6]) rotate([0,0,0]) linear_extrude(height = 0.6) 
+        { text("R7",font = "helvetica:style=Bold", size=4, center=true); }
+        
+
     }
 }
 

Printed-Parts/SCAD/x-carriage.scad

@@ -66,10 +66,13 @@ module x_carriage_base()
 module x_carriage_holes()
 {
     // Small bearing holder holes cutter
-    translate([-33/2,0,0]) rotate([0,0,90]) horizontal_bearing_holes_nozip(1);
+    translate([-33/2,0,0]) rotate([0,0,90]) horizontal_bearing_holes_nozip_smooth(1);
+    translate([-4,-2.5,4]) rotate([0,0,90]) cube([5,25,2]);
     
     // Long bearing holder holes cutter
-    translate([-33/2,45,0]) rotate([0,0,90]) horizontal_bearing_holes_nozip(2);
+    translate([-33/2,45,0]) rotate([0,0,90]) horizontal_bearing_holes_nozip_smooth(2);
+    translate([8.5,45-2.5,4]) rotate([0,0,90]) cube([5,50,2]);
+
   
     // upper ziptie right
     translate([2,0,0])
@@ -387,9 +390,9 @@ module x_carriage()
             translate([0,-0.5,0]) left_belt_cut();
             translate([0,0.5,0]) right_belt_cut();
             
-            //version
+					 //version
-            translate([-11,-2,0.7]) rotate([0,180,0]) linear_extrude(height = 0.75) 
+            translate([-12,-2,0.5]) rotate([0,180,0]) linear_extrude(height = 0.6) 
-            { text("R4",font = "helvetica:style=Bold", size=6, center=true); }
+            { text("R7",font = "helvetica:style=Bold", size=5, center=true); }
 
 
     }

Printed-Parts/SCAD/x-end-idler.scad

@@ -146,6 +146,9 @@ module x_end_idler()
 
         translate(v=[-8,-15.5,30.25]) rotate(a=[0,-90,0]) cylinder(h = 20, r=1.55, $fn=30);
         translate([-25,7.5,-1]) rotate([0,0,45])  cube([10,10,100]);
+	//version
+        translate([-23.7,-25,2]) rotate([90,0,90]) linear_extrude(height = 0.6) 
+        { text("R6",font = "helvetica:style=Bold", size=4, center=true); }   
     }
     
     // bearings stop

Printed-Parts/SCAD/x-end-motor.scad

@@ -100,6 +100,10 @@ module x_end_motor()
             translate([-17,3,55]) cube([4,4,10]);
             translate([-17,3,-8]) cube([4,4,10]);
             translate([-30,-30,58]) cube([30,30,10]);
+	                
+            // version
+            translate([-23.2,-20,2]) rotate([90,0,270]) linear_extrude(height = 0.6) 
+            { text("R6",font = "helvetica:style=Bold", size=4, center=true); }   
             
         }
 

README.md

@@ -2,7 +2,7 @@
 
 
 Original Prusa i3 MK3S is a 3D printer project maintained by PRUSA RESEARCH.
-Originates in RepRap project.
+Originates in [RepRap](https://reprap.org) project made possible by Dr. Adrian Bowyer and contributors.
 
 This repository contains SCAD files and STLs of the printed parts.