Commit Graph

  • b71c8f3c08
    motor opening, tolerances akukan 2018-02-11 11:03:18 +0100
  • ce0396c5bd
    SD card window size & supports akukan 2018-02-11 10:59:20 +0100
  • a97e0c213b
    SD card window size & supports akukan 2018-02-11 10:58:36 +0100
  • 839394efe6
    extruder screw clearance, tolerances akukan 2018-02-11 10:56:38 +0100
  • 585d7b048d
    extruder screw clearance, tolerances akukan 2018-02-11 10:55:45 +0100
  • d6aa325fdc
    screws & nuts tolerances , rotated to proper print position akukan 2018-02-11 10:54:43 +0100
  • eb6a5f64a9
    screws & nuts tolerances , rotated to proper print position akukan 2018-02-11 10:53:08 +0100
  • 0dd8cb902e
    tolerances akukan 2018-02-11 10:51:35 +0100
  • e7fa7238e3
    screws and nuts tolerances akukan 2018-02-11 10:50:10 +0100
  • 2b72d22a20
    screws and nuts tolerances akukan 2018-02-11 10:48:10 +0100
  • ce1d38f47c
    removed, replaced by y-rod-holder akukan 2018-02-11 10:30:45 +0100
  • 9ae408cc70
    removed, replaced by y-rod-holder akukan 2018-02-11 10:30:32 +0100
  • 0f1ee01698
    removed, replaced by y-rod-holder akukan 2018-02-11 10:30:16 +0100
  • 7979040296
    removed, replaced by y-rod-holder akukan 2018-02-11 10:29:58 +0100
  • 65d12f30b3
    Merge 8057bf6fa7 into c924f73204 Grzegorz Krzystek 2018-02-04 12:34:47 +0000
  • 8057bf6fa7 Adjust x-end-idler pulley screw hole to exactly match M3 screw That solves problem with pulley being not alignred correctly as mentioned in #50 Grzegorz {NineX} Krzystek 2018-02-04 12:59:19 +0100
  • 3f88fb22d2
    Merge 9728c7c065 into c924f73204 Grzegorz Krzystek 2018-02-02 21:43:23 +0000
  • 9728c7c065 Merge branch 'MK3' of github.com:Nine-X/Original-Prusa-i3 into MK3 Grzegorz {NineX} Krzystek 2018-02-02 22:41:38 +0100
  • d951705823 Adjusted X-IDLER pulley screw holes to better match m3 screw size Grzegorz {NineX} Krzystek 2018-02-02 22:39:41 +0100
  • 54cff4f5bf Adjusted X-IDLER pulley screw holes to better match m3 screw size Grzegorz {NineX} Krzystek 2018-02-02 22:24:07 +0100
  • ae9a42d0a5 Merge 01017d188a into c924f73204 Chuck Burgess 2018-01-26 09:09:20 +0000
  • c924f73204
    y-rod-holder added akukan 2018-01-25 11:16:20 +0100
  • ae2a9a1052
    y-rod-holder added akukan 2018-01-25 11:15:32 +0100
  • f83cb78659
    Rotated to proper print position akukan 2018-01-22 15:01:11 +0100
  • 85a377a4c2
    Rotated to proper print position akukan 2018-01-22 15:00:15 +0100
  • 917958c47c
    Added new Heatbed Cover Jonathan Kayne 2018-01-14 15:24:22 -0500
  • 4ea5cc6eff
    Added new Heatbed Cover Jonathan Kayne 2018-01-14 15:16:51 -0500
  • e6f480e99a
    Converted new heatbed cover to STEP Jonathan Kayne 2018-01-14 15:15:14 -0500
  • b593d3d091
    Heatbed cable cover with screw clip akukan 2018-01-10 09:50:23 +0100
  • 524e47bf4b
    Heatbed cable cover with screw clip akukan 2018-01-10 09:49:38 +0100
  • d5676503af
    Heatbed cable cover with screw clip akukan 2018-01-10 09:31:17 +0100
  • 83266a1d49
    Heatbed cable cover with screw clip akukan 2018-01-10 09:29:26 +0100
  • c5e1dd9254
    Heatbed cable cover with screw clip akukan 2018-01-10 09:28:30 +0100
  • 01017d188a Replacing STL Chuck Burgess 2018-01-05 20:15:47 -0700
  • dc12205bb8 Narrowing Belt Gap R Chuck Burgess 2018-01-05 20:09:56 -0700
  • 1202608e74
    Parasolid Binary (Ver 26.0) - Fixed Frame Jonathan Kayne 2017-12-22 18:34:09 -0500
  • b800c230f5
    Fixed Frame Thickness Jonathan Kayne 2017-12-22 18:32:21 -0500
  • bf22162092
    Fixed Frame Thickness Jonathan Kayne 2017-12-22 18:05:29 -0500
  • 85574cff11
    Rambo-hinges added akukan 2017-12-14 15:18:54 +0100
  • da78c264a0
    Delete Rambo-Hinges.scad akukan 2017-12-14 15:18:27 +0100
  • b31ab2ebf5
    Rambo-hinges added akukan 2017-12-14 15:18:07 +0100
  • 58274df9b1
    Duplicity akukan 2017-12-13 20:53:24 +0100
  • 1472494fbf
    rpi-zero-frame added akukan 2017-12-13 17:35:35 +0100
  • 83d8c04c30
    Update README.md akukan 2017-12-12 17:42:26 +0100
  • 1244cde3cf
    Delete z-screw-cover.stl akukan 2017-12-12 17:35:06 +0100
  • 3646b76875
    Delete z-screw-cover.scad akukan 2017-12-12 17:34:54 +0100
  • eebfc431c3
    MK2.5 upgrade initial akukan 2017-12-12 17:34:36 +0100
  • 09bb00c3c9
    MK2.5 upgrade initial akukan 2017-12-12 17:33:24 +0100
  • 91229ea048
    Delete z-axis-top.stl akukan 2017-12-12 17:32:27 +0100
  • 45b2b9bfa2
    Delete z-axis-bottom.stl akukan 2017-12-12 17:32:18 +0100
  • 26454b616d
    Delete y-motor-holder.stl akukan 2017-12-12 17:32:10 +0100
  • f0744da26d
    Delete y-holder-rear.stl akukan 2017-12-12 17:32:02 +0100
  • 2d6ba398a3
    Delete y-holder-front.stl akukan 2017-12-12 17:31:55 +0100
  • 763e494ba7
    Delete y-belt-idler.stl akukan 2017-12-12 17:31:44 +0100
  • cf10b529d3
    Delete y-belt-holder.stl akukan 2017-12-12 17:31:35 +0100
  • 6c14658cbe
    Delete x-end-motor.stl akukan 2017-12-12 17:31:28 +0100
  • 96833de6ff
    Delete x-end-idler.stl akukan 2017-12-12 17:31:20 +0100
  • b10faadde8
    Delete x-carriage.stl akukan 2017-12-12 17:30:49 +0100
  • 7d176ff315
    Delete x-carriage-back.stl akukan 2017-12-12 17:30:37 +0100
  • 3e71c92144
    Delete nozzle-fan.stl akukan 2017-12-12 17:30:06 +0100
  • 981f14cc28
    Delete lcd-supports.stl akukan 2017-12-12 17:29:58 +0100
  • 8b558effc0
    Delete heatbed-cable-cover.stl akukan 2017-12-12 17:29:51 +0100
  • ecdd5bacba
    Delete filament-sensor-cover.stl akukan 2017-12-12 17:29:41 +0100
  • 673ac37886
    Delete extruder-idler.stl akukan 2017-12-12 17:29:31 +0100
  • b0ec97e81f
    Delete extruder-idler-plug.stl akukan 2017-12-12 17:29:22 +0100
  • ebc86fd4c0
    Delete extruder-cover.stl akukan 2017-12-12 17:29:06 +0100
  • f4b2c2414d
    Delete extruder-body.stl akukan 2017-12-12 17:28:57 +0100
  • b430998fe7
    Delete cable-holder.stl akukan 2017-12-12 17:28:50 +0100
  • 2c63c80f68
    Delete Spool-holder.stl akukan 2017-12-12 17:28:43 +0100
  • 641824bf39
    Delete LCD-cover-ORIGINAL-MK3.stl akukan 2017-12-12 17:28:32 +0100
  • d2c6324edc
    Delete Einsy-hinges.stl akukan 2017-12-12 17:28:26 +0100
  • 092baa632b
    Delete Einsy-doors.stl akukan 2017-12-12 17:28:20 +0100
  • e347d0a493
    Delete Einsy-base.stl akukan 2017-12-12 17:28:13 +0100
  • afffd653d5
    Delete z-axis-top.scad akukan 2017-12-12 17:27:57 +0100
  • 60f02f58b2
    Delete z-axis-bottom.scad akukan 2017-12-12 17:27:50 +0100
  • bc9e842d3b
    Delete y-motor-holder.scad akukan 2017-12-12 17:27:42 +0100
  • 12b97e452f
    Delete y-holder-rear.scad akukan 2017-12-12 17:27:33 +0100
  • fdfd11dba6
    Delete y-holder-front.scad akukan 2017-12-12 17:27:25 +0100
  • e9bedc80ff
    Delete y-belt-idler.scad akukan 2017-12-12 17:27:17 +0100
  • d2c4981a3e
    Delete y-belt-holder.scad akukan 2017-12-12 17:27:07 +0100
  • 5d57b38125
    Delete x-end.scad akukan 2017-12-12 17:27:00 +0100
  • 1befafbefe
    Delete x-end-motor.scad akukan 2017-12-12 17:26:50 +0100
  • bdecc29e55
    Delete x-end-idler.scad akukan 2017-12-12 17:26:40 +0100
  • 061ce6f128
    Delete x-carriage.scad akukan 2017-12-12 17:26:32 +0100
  • 7663a972b2
    Delete x-carriage-back.scad akukan 2017-12-12 17:26:23 +0100
  • a958d9080b
    Delete polyholes.scad akukan 2017-12-12 17:26:15 +0100
  • d6e40a533d
    Delete nozzle-fan.scad akukan 2017-12-12 17:26:06 +0100
  • 61ee2dce96
    Delete lcd-supports.scad akukan 2017-12-12 17:25:57 +0100
  • 72898d229c
    Delete heatbed-cable-cover.scad akukan 2017-12-12 17:25:48 +0100
  • 039804df9d
    Delete filament-sensor-cover.scad akukan 2017-12-12 17:25:40 +0100
  • 51ecbfcaad
    Delete extruder-idler.scad akukan 2017-12-12 17:25:33 +0100
  • 88904f9aaa
    Delete extruder-idler-plug.scad akukan 2017-12-12 17:25:24 +0100
  • 304ef8600f
    Delete extruder-cover.scad akukan 2017-12-12 17:25:10 +0100
  • 22bedfffef
    Delete extruder-body.scad akukan 2017-12-12 17:24:59 +0100
  • a9c4005c03
    Delete cable-holder.scad akukan 2017-12-12 17:24:49 +0100
  • 0f9dc67c79
    Delete bearing.scad akukan 2017-12-12 17:24:40 +0100
  • c01a497b19
    Delete LCD-cover-ORIGINAL-MK3.scad akukan 2017-12-12 17:24:31 +0100
  • 55cd475da0
    Delete Einsy-hinges.scad akukan 2017-12-12 17:24:18 +0100
  • 2f87d280f1
    Delete Einsy-doors.scad akukan 2017-12-12 17:24:09 +0100
  • 7676015e60
    Delete Einsy-base.scad akukan 2017-12-12 17:23:59 +0100