// PRUSA iteration4
// Y holder front
// GNU GPL v3
// Josef Průša <iam@josefprusa.cz> and contributors
// http://www.reprap.org/wiki/Prusa_Mendel
// http://prusamendel.org

module ziptie_round_edge()
{
    difference()
    {
        translate([0,0,0]) rotate([90,0,0]) cylinder( h=3.2, r=4, $fn=50 );  
        translate([0,1,0]) rotate([90,0,0]) cylinder( h=5, r=2, $fn=50 );  
        translate([-10,-4,0]) cube([20,5,5]);
        translate([-20,-4,-13]) cube([20,5,20]);
    }
}


module part()    
{

    difference()
    {
        union()
        {
            // body block
            difference() {
                translate([-13,-3,0]) cube([26,10,12]);
                
                // upper corners
                translate([4,-3.5,20]) rotate([0,60,0]) cube([20,30,20]);
                translate([-21.2,-3.5,30]) rotate([0,120,0]) cube([20,30,20]);
                translate([-15,-3.3,-6]) rotate([45,0,0]) cube([30,5,5]);
                translate([15,7.3,-6]) rotate([45,0,180]) cube([30,5,5]);
            }
            difference() {
            translate([-4,2,-2]) cube([8,5,3]);
                
             // upper corners   
            translate([-15,2,-7.07]) rotate([45,0,0]) cube([30,5,5]); 
            translate([15,9.5,-6]) rotate([45,0,180]) cube([30,5,5]);  
            }
        }

        // y-axis cut
        translate([0,11,10.5]) rotate([90,0,0]) cylinder( h=14, r=4, $fn=50 );
       translate([0,8,10.5]) rotate([90,0,0]) cylinder( h=2, r1=4.5, r2=4, $fn=50 );
        translate([0,-2,10.5]) rotate([90,0,0]) cylinder( h=2, r1=4, r2=4.5, $fn=50 );
        translate([-7,-4,14.5]) rotate([0,45,0]) cube([10,20,10]);
        translate([0,8,10.5]) rotate([90,0,0]) cylinder( h=1.4, r1=5, r2=4, $fn=50 );

        // screw holes
        translate([-5.5,4,3.5]) rotate([90,0,0]) cylinder( h=20, r=1.55, $fn=60 );
        translate([5.5,4,3.5]) rotate([90,0,0]) cylinder( h=20, r=1.55, $fn=60 );
        translate([-5.5,-2.4,3.5]) rotate([90,0,0]) cylinder( h=2, r1=1.5, r2=2.6, $fn=60 );
        translate([5.5,-2.4,3.5]) rotate([90,0,0]) cylinder( h=2, r1=1.5, r2=2.6, $fn=60 );

        
        // ziptie
        translate([7.8,5.75,9]) ziptie_round_edge();
        translate([-7.8,2.55,9]) rotate([0,0,180]) ziptie_round_edge();
        translate([-8.1,2.55,5]) cube([16.2,3.2,2]);
        translate([0.8,2.55,25]) rotate([0,60,0]) cube([20,3.2,2]);
        translate([-1.8,2.55,27]) rotate([0,120,0]) cube([20,3.2,2]);


        // nuts
        difference () {
         union(){
        translate([-8.2,-0.45,-3.4]) cube([5.6,2.1,10]);
        translate([2.8,-0.45,-3.4]) cube([5.6,2.1,10]);}
        
        // nut holding '
        translate([-14,-0.45,-0.02]) cube([24,0.5,0.5]);
        
        }
        // nut print supports
        translate([-8.2,-0.25,3.5-3.2/2]) cube([5.6,2.1,3.2]);
        translate([2.8,-0.25,3.5-3.2/2]) cube([5.6,2.1,3.2]);
        translate([-7.1,0,3.5-3.2/2]) cube([3.2,2.1,3.2]);
        translate([3.9,0,3.5-3.2/2]) cube([3.2,2.1,3.2]);


        // upper corners
        

    }
}


rotate([90,0,0])part();