Revert "Rebase to upstream changes."

This reverts commit 3afe6d09e2.
Resolves conflicts with upstream Pull request.

Firmware/Marlin_main.cpp

@@ -874,88 +874,6 @@ static void lcd_language_menu();
    enum MeshLevelingState { MeshReport, MeshStart, MeshNext, MeshSet };
 #endif
 
-
-// Factory reset function
-// This function is used to erase parts or whole EEPROM memory which is used for storing calibration and and so on.
-// Level input parameter sets depth of reset
-// Quiet parameter masks all waitings for user interact.
-int  er_progress = 0;
-void factory_reset(char level, bool quiet)
-{
-    
-    switch (level) {
-        
-        // Level 0: erase everything, whole EEPROM will be set to 0xFF
-        case 0:
-            
-            lcd_print_at_PGM(1,2,PSTR("ERASING all data"));
-            
-            WRITE(BEEPER, HIGH);
-            _delay_ms(100);
-            WRITE(BEEPER, LOW);
-            _delay_ms(100);
-            WRITE(BEEPER, HIGH);
-            _delay_ms(100);
-            WRITE(BEEPER, LOW);
-            _delay_ms(200);
-            
-            er_progress = 0;
-            lcd_print_at_PGM(3,3,PSTR("      "));
-            lcd_implementation_print_at(3,3, er_progress);
-            
-            // Erase EEPROM
-            for (int i = 0; i < 4096; i++) {
-                eeprom_write_byte((uint8_t*)i, 0xFF);
-                
-                if (i % 41 == 0) {
-                    er_progress++;
-                    lcd_print_at_PGM(3,3,PSTR("      "));
-                    lcd_implementation_print_at(3,3, er_progress);
-                    lcd_printPGM(PSTR("%"));
-                }
-                
-            }
-            
-        
-            break;
-            
-            
-        // Level 1: Language reset
-        case 1:
-            WRITE(BEEPER, HIGH);
-            _delay_ms(100);
-            WRITE(BEEPER, LOW);
-            
-            lcd_force_language_selection();
-            break;
-            
-            
-        // Level 2: Prepare for shipping
-        case 2:
-            lcd_print_at_PGM(1,2,PSTR("Shipping prep"));
-            
-            // Force language selection at the next boot up.
-            lcd_force_language_selection();
-            // Force the "Follow calibration flow" message at the next boot up.
-            calibration_status_store(CALIBRATION_STATUS_Z_CALIBRATION);
-            farm_no = 0;
-            EEPROM_save_B(EEPROM_FARM_MODE, &farm_no);
-            farm_mode = false;
-            
-            WRITE(BEEPER, HIGH);
-            _delay_ms(100);
-            WRITE(BEEPER, LOW);
-            
-            break;
-        
-        default:
-            break;
-    }
-    
-
-}
-
-
 // "Setup" function is called by the Arduino framework on startup.
 // Before startup, the Timers-functions (PWM)/Analog RW and HardwareSerial provided by the Arduino-code 
 // are initialized by the main() routine provided by the Arduino framework.
@@ -1030,33 +948,21 @@ void setup()
 	  _delay_ms(1000);
 	  if (!READ(BTN_ENC))
 	  {
-          lcd_implementation_clear();
-          lcd_printPGM(PSTR("Factory RESET"));
-          
 		  SET_OUTPUT(BEEPER);
 		  WRITE(BEEPER, HIGH);
 
-          while (!READ(BTN_ENC));
+      // Force language selection at the next boot up.
+		  lcd_force_language_selection();
+      // Force the "Follow calibration flow" message at the next boot up.
+      calibration_status_store(CALIBRATION_STATUS_Z_CALIBRATION);
+		  farm_no = 0;
+		  EEPROM_save_B(EEPROM_FARM_MODE, &farm_no);
+		  farm_mode = false;
 
-          WRITE(BEEPER, LOW);
+		  while (!READ(BTN_ENC));
 
+		  WRITE(BEEPER, LOW);
 
-
-		  _delay_ms(2000);
-          if (!READ(BTN_ENC))
-          {
-          
-              factory_reset(0,false);
-          }
-          else
-          {
-              factory_reset(2,false);
-              
-          }
-          
-          _delay_ms(2000);
-          
-/*
 #ifdef MESH_BED_LEVELING
 		  _delay_ms(2000);
 
@@ -1083,7 +989,7 @@ void setup()
 			  _delay_ms(100);
 			  WRITE(BEEPER, LOW);
 		  }
-#endif // mesh */
+#endif // mesh
 
 	  }
   }
@@ -1900,10 +1806,6 @@ void process_commands()
         // Kick farm link timer
         kicktime = millis();
 
-    } else if(code_seen("FR")) {
-        // Factory full reset
-        factory_reset(0,true);
-        
     }
     //else if (code_seen('Cal')) {
 		//  lcd_calibration();

Firmware/stepper.cpp

@@ -1017,7 +1017,7 @@ void digipot_init() //Initialize Digipot Motor Current
     pinMode(MOTOR_CURRENT_PWM_XY_PIN, OUTPUT);
     pinMode(MOTOR_CURRENT_PWM_Z_PIN, OUTPUT);
     pinMode(MOTOR_CURRENT_PWM_E_PIN, OUTPUT);
-    if((SilentMode == 0) || (farm_mode) ){
+    if(SilentMode == 0){
 
      motor_current_setting[0] = motor_current_setting_loud[0];
      motor_current_setting[1] = motor_current_setting_loud[1];

Firmware/ultralcd.cpp

@@ -25,8 +25,6 @@ extern int lcd_change_fil_state;
 //Function pointer to menu functions.
 typedef void (*menuFunc_t)();
 
-static void lcd_sd_updir();
-
 struct EditMenuParentState
 {
     //prevMenu and prevEncoderPosition are used to store the previous menu location when editing settings.
@@ -2157,7 +2155,7 @@ static void lcd_settings_menu()
 	  MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84"));
   }
 
-  if ((SilentModeMenu == 0) || (farm_mode) ) {
+  if (SilentModeMenu == 0) {
     MENU_ITEM(function, MSG_SILENT_MODE_OFF, lcd_silent_mode_set);
   } else {
     MENU_ITEM(function, MSG_SILENT_MODE_ON, lcd_silent_mode_set);
@@ -2520,56 +2518,6 @@ static void lcd_main_menu()
 
   
  MENU_ITEM(back, MSG_WATCH, lcd_status_screen);
-    if (farm_mode && !IS_SD_PRINTING )
-    {
-    
-        int tempScrool = 0;
-        if (lcdDrawUpdate == 0 && LCD_CLICKED == 0)
-            //delay(100);
-            return; // nothing to do (so don't thrash the SD card)
-        uint16_t fileCnt = card.getnrfilenames();
-        
-        card.getWorkDirName();
-        if (card.filename[0] == '/')
-        {
-#if SDCARDDETECT == -1
-            MENU_ITEM(function, MSG_REFRESH, lcd_sd_refresh);
-#endif
-        } else {
-            MENU_ITEM(function, PSTR(LCD_STR_FOLDER ".."), lcd_sd_updir);
-        }
-        
-        for (uint16_t i = 0; i < fileCnt; i++)
-        {
-            if (_menuItemNr == _lineNr)
-            {
-#ifndef SDCARD_RATHERRECENTFIRST
-                card.getfilename(i);
-#else
-                card.getfilename(fileCnt - 1 - i);
-#endif
-                if (card.filenameIsDir)
-                {
-                    MENU_ITEM(sddirectory, MSG_CARD_MENU, card.filename, card.longFilename);
-                } else {
-                    
-                    MENU_ITEM(sdfile, MSG_CARD_MENU, card.filename, card.longFilename);
-                    
-                    
-                    
-                    
-                }
-            } else {
-                MENU_ITEM_DUMMY();
-            }
-        }
-        
-        MENU_ITEM(back, PSTR("- - - - - - - - -"), lcd_status_screen);
-    
-        
-    }
-    
-    
 
   if ( ( IS_SD_PRINTING || is_usb_printing ) && (current_position[Z_AXIS] < Z_HEIGHT_HIDE_LIVE_ADJUST_MENU) ) 
   {