josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Enable EEPROM_UVLO flag for host prints 

Change in memory:
Flash: -30 bytes
SRAM: 0 bytes
This commit is contained in:
gudnimg 2023-11-25 15:41:31 +00:00 committed by DRracer
parent ce24d917e6
commit 02c5da198d
1 changed files with 2 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
Firmware/power_panic.cpp
View File

@ -41,10 +41,7 @@ void uvlo_() {
unsigned long time_start = _millis();
// True if a print is already saved to RAM
bool sd_print_saved_in_ram = saved_printing && (saved_printing_type == PowerPanic::PRINT_TYPE_SD);
// Flag to decide whether or not to set EEPROM_UVLO bit
bool sd_print = card.sdprinting || sd_print_saved_in_ram;
const bool sd_print_saved_in_ram = saved_printing && (saved_printing_type == PowerPanic::PRINT_TYPE_SD);
const bool pos_invalid = mesh_bed_leveling_flag || homing_flag;
// Conserve as much power as soon as possible
@ -195,10 +192,7 @@ void uvlo_() {
#endif
// Finally store the "power outage" flag.
// Note: Recovering a print from EEPROM currently assumes the user
// is printing from an SD card, this is why this EEPROM byte is only set
// when SD card print is detected
if(sd_print) eeprom_update_byte((uint8_t*)EEPROM_UVLO, PowerPanic::PENDING_RECOVERY);
eeprom_update_byte((uint8_t*)EEPROM_UVLO, PowerPanic::PENDING_RECOVERY);
// Increment power failure counter
eeprom_increment_byte((uint8_t*)EEPROM_POWER_COUNT);