josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Added missing strings (not translated) to dictionaries using lang-add.sh

This commit is contained in:
Robert Pelnar 2018-11-06 16:40:09 +01:00
parent 77fa893699
commit 065a4e0232
7 changed files with 486 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

54
lang/lang_en.txt
View File

@ -43,6 +43,9 @@
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"Auto deplete [on]" "Auto deplete [on]"
#
"Auto deplete[N/A]"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"Auto deplete[off]" "Auto deplete[off]"
@ -310,6 +313,9 @@
#MSG_WIZARD_SELFTEST c=20 r=8 #MSG_WIZARD_SELFTEST c=20 r=8
"First, I will run the selftest to check most common assembly problems." "First, I will run the selftest to check most common assembly problems."
#
"Fix the issue and then press button on MMU unit."
#MSG_FLOW c=0 r=0 #MSG_FLOW c=0 r=0
"Flow" "Flow"
@ -472,6 +478,9 @@
#MSG_M105_INVALID_EXTRUDER c=0 r=0 #MSG_M105_INVALID_EXTRUDER c=0 r=0
"M105 Invalid extruder " "M105 Invalid extruder "
#
"Load to nozzle"
#MSG_M109_INVALID_EXTRUDER c=0 r=0 #MSG_M109_INVALID_EXTRUDER c=0 r=0
"M109 Invalid extruder " "M109 Invalid extruder "
@ -514,6 +523,9 @@
#MSG_SILENT_MODE_ON c=0 r=0 #MSG_SILENT_MODE_ON c=0 r=0
"Mode [silent]" "Mode [silent]"
#
"MMU needs user attention."
#MSG_STEALTH_MODE_ON c=0 r=0 #MSG_STEALTH_MODE_ON c=0 r=0
"Mode [Stealth]" "Mode [Stealth]"
@ -556,6 +568,9 @@
# #
"New firmware version available:" "New firmware version available:"
#
"No "
#MSG_SELFTEST_FAN_NO c=19 r=0 #MSG_SELFTEST_FAN_NO c=19 r=0
"Not spinning" "Not spinning"
@ -580,6 +595,9 @@
#MSG_ENDSTOP_OPEN c=0 r=0 #MSG_ENDSTOP_OPEN c=0 r=0
"open" "open"
#
"Now remove the test print from steel sheet."
#MSG_SD_OPENROOT_FAIL c=0 r=0 #MSG_SD_OPENROOT_FAIL c=0 r=0
"openRoot failed" "openRoot failed"
@ -652,6 +670,9 @@
#MSG_POWERUP c=0 r=0 #MSG_POWERUP c=0 r=0
"PowerUp" "PowerUp"
#
"Please remove shipping helpers first."
#MSG_PREHEAT_NOZZLE c=20 r=0 #MSG_PREHEAT_NOZZLE c=20 r=0
"Preheat the nozzle!" "Preheat the nozzle!"
@ -682,6 +703,9 @@
#MSG_ERR_KILLED c=0 r=0 #MSG_ERR_KILLED c=0 r=0
"Printer halted. kill() called!" "Printer halted. kill() called!"
#
"Press the knob to resume nozzle temperature."
#MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8 #MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
"Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow." "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
@ -706,6 +730,9 @@
#MSG_REMOVE_OLD_FILAMENT c=20 r=4 #MSG_REMOVE_OLD_FILAMENT c=20 r=4
"Remove old filament and press the knob to start loading new filament." "Remove old filament and press the knob to start loading new filament."
#
"Prusa i3 MK2 ready."
#MSG_CALIBRATE_BED_RESET c=0 r=0 #MSG_CALIBRATE_BED_RESET c=0 r=0
"Reset XYZ calibr." "Reset XYZ calibr."
@ -820,6 +847,9 @@
#MSG_SOUND_MUTE c=17 r=1 #MSG_SOUND_MUTE c=17 r=1
"Sound [mute]" "Sound [mute]"
#
"Some problem encountered, Z-leveling enforced ..."
#MSG_SOUND_ONCE c=17 r=1 #MSG_SOUND_ONCE c=17 r=1
"Sound [once]" "Sound [once]"
@ -919,6 +949,9 @@
#MSG_WAITING_TEMP_PINDA c=20 r=3 #MSG_WAITING_TEMP_PINDA c=20 r=3
"Waiting for PINDA probe cooling" "Waiting for PINDA probe cooling"
#
"Use unload to remove filament 1 if it protrudes outside of the rear MMU tube. Use eject if it is hidden in tube."
#MSG_CHANGED_BOTH c=20 r=4 #MSG_CHANGED_BOTH c=20 r=4
"Warning: both printer type and motherboard type changed." "Warning: both printer type and motherboard type changed."
@ -955,6 +988,9 @@
#MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8 #MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
"XYZ calibration all right. X/Y axes are slightly skewed. Good job!" "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
#
"X-correct"
#MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8 #MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
"XYZ calibration ok. X/Y axes are perpendicular. Congratulations!" "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
@ -973,12 +1009,30 @@
#MSG_LOAD_FILAMENT_1 c=17 r=0 #MSG_LOAD_FILAMENT_1 c=17 r=0
"Load filament 1" "Load filament 1"
#
"XYZ calibration failed. Bed calibration point was not found."
#
"XYZ calibration failed. Front calibration points not reachable."
#
"XYZ calibration failed. Left front calibration point not reachable."
#MSG_LOAD_FILAMENT_2 c=17 r=0 #MSG_LOAD_FILAMENT_2 c=17 r=0
"Load filament 2" "Load filament 2"
#
"XYZ calibration failed. Right front calibration point not reachable."
#MSG_LOAD_FILAMENT_3 c=17 r=0 #MSG_LOAD_FILAMENT_3 c=17 r=0
"Load filament 3" "Load filament 3"
#
"Y distance from min"
#
"Y-correct"
#MSG_LOAD_FILAMENT_4 c=17 r=0 #MSG_LOAD_FILAMENT_4 c=17 r=0
"Load filament 4" "Load filament 4"

72
lang/lang_en_cz.txt
View File

@ -58,6 +58,10 @@
"Auto deplete [on]" "Auto deplete [on]"
"\x00" "\x00"
#
"Auto deplete[N/A]"
"\x00"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"Auto deplete[off]" "Auto deplete[off]"
"\x00" "\x00"
@ -414,6 +418,10 @@
"First, I will run the selftest to check most common assembly problems." "First, I will run the selftest to check most common assembly problems."
"Nejdriv pomoci selftestu zkontoluji nejcastejsi chyby vznikajici pri sestaveni tiskarny." "Nejdriv pomoci selftestu zkontoluji nejcastejsi chyby vznikajici pri sestaveni tiskarny."
#
"Fix the issue and then press button on MMU unit."
"\x00"
#MSG_FLOW c=0 r=0 #MSG_FLOW c=0 r=0
"Flow" "Flow"
"Prutok" "Prutok"
@ -630,6 +638,10 @@
"M105 Invalid extruder " "M105 Invalid extruder "
"\x00" "\x00"
#
"Load to nozzle"
"\x00"
#MSG_M109_INVALID_EXTRUDER c=0 r=0 #MSG_M109_INVALID_EXTRUDER c=0 r=0
"M109 Invalid extruder " "M109 Invalid extruder "
"\x00" "\x00"
@ -686,6 +698,10 @@
"Mode [silent]" "Mode [silent]"
"Mod [tichy]" "Mod [tichy]"
#
"MMU needs user attention."
"\x00"
#MSG_STEALTH_MODE_ON c=0 r=0 #MSG_STEALTH_MODE_ON c=0 r=0
"Mode [Stealth]" "Mode [Stealth]"
"Mod [Stealth]" "Mod [Stealth]"
@ -742,6 +758,10 @@
"New firmware version available:" "New firmware version available:"
"\x00" "\x00"
#
"No "
"\x00"
#MSG_SELFTEST_FAN_NO c=19 r=0 #MSG_SELFTEST_FAN_NO c=19 r=0
"Not spinning" "Not spinning"
"Netoci se" "Netoci se"
@ -774,6 +794,10 @@
"open" "open"
"\x00" "\x00"
#
"Now remove the test print from steel sheet."
"\x00"
#MSG_SD_OPENROOT_FAIL c=0 r=0 #MSG_SD_OPENROOT_FAIL c=0 r=0
"openRoot failed" "openRoot failed"
"\x00" "\x00"
@ -870,6 +894,10 @@
"PowerUp" "PowerUp"
"\x00" "\x00"
#
"Please remove shipping helpers first."
"\x00"
#MSG_PREHEAT_NOZZLE c=20 r=0 #MSG_PREHEAT_NOZZLE c=20 r=0
"Preheat the nozzle!" "Preheat the nozzle!"
"Predehrejte trysku!" "Predehrejte trysku!"
@ -910,6 +938,10 @@
"Printer halted. kill() called!" "Printer halted. kill() called!"
"\x00" "\x00"
#
"Press the knob to resume nozzle temperature."
"\x00"
#MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8 #MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
"Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow." "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
"Tiskarna nebyla jeste zkalibrovana. Postupujte prosim podle manualu, kapitola Zaciname, odstavec Postup kalibrace." "Tiskarna nebyla jeste zkalibrovana. Postupujte prosim podle manualu, kapitola Zaciname, odstavec Postup kalibrace."
@ -942,6 +974,10 @@
"Remove old filament and press the knob to start loading new filament." "Remove old filament and press the knob to start loading new filament."
"Vyjmete stary filament a stisknete tlacitko pro zavedeni noveho." "Vyjmete stary filament a stisknete tlacitko pro zavedeni noveho."
#
"Prusa i3 MK2 ready."
"\x00"
#MSG_CALIBRATE_BED_RESET c=0 r=0 #MSG_CALIBRATE_BED_RESET c=0 r=0
"Reset XYZ calibr." "Reset XYZ calibr."
"Reset XYZ kalibr." "Reset XYZ kalibr."
@ -1094,6 +1130,10 @@
"Sound [mute]" "Sound [mute]"
"Zvuk [vypnuto]" "Zvuk [vypnuto]"
#
"Some problem encountered, Z-leveling enforced ..."
"\x00"
#MSG_SOUND_ONCE c=17 r=1 #MSG_SOUND_ONCE c=17 r=1
"Sound [once]" "Sound [once]"
"Zvuk [jednou]" "Zvuk [jednou]"
@ -1226,6 +1266,10 @@
"Waiting for PINDA probe cooling" "Waiting for PINDA probe cooling"
"Cekani na zchladnuti PINDA" "Cekani na zchladnuti PINDA"
#
"Use unload to remove filament 1 if it protrudes outside of the rear MMU tube. Use eject if it is hidden in tube."
"\x00"
#MSG_CHANGED_BOTH c=20 r=4 #MSG_CHANGED_BOTH c=20 r=4
"Warning: both printer type and motherboard type changed." "Warning: both printer type and motherboard type changed."
"Varovani: doslo ke zmene typu tiskarny a motherboardu." "Varovani: doslo ke zmene typu tiskarny a motherboardu."
@ -1274,6 +1318,10 @@
"XYZ calibration all right. X/Y axes are slightly skewed. Good job!" "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
"Kalibrace XYZ v poradku. X/Y osy mirne zkosene. Dobra prace!" "Kalibrace XYZ v poradku. X/Y osy mirne zkosene. Dobra prace!"
#
"X-correct"
"\x00"
#MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8 #MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
"XYZ calibration ok. X/Y axes are perpendicular. Congratulations!" "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
"Kalibrace XYZ v poradku. X/Y osy jsou kolme. Gratuluji!" "Kalibrace XYZ v poradku. X/Y osy jsou kolme. Gratuluji!"
@ -1298,14 +1346,38 @@
"Load filament 1" "Load filament 1"
"Zavest filament 1" "Zavest filament 1"
#
"XYZ calibration failed. Bed calibration point was not found."
"\x00"
#
"XYZ calibration failed. Front calibration points not reachable."
"\x00"
#
"XYZ calibration failed. Left front calibration point not reachable."
"\x00"
#MSG_LOAD_FILAMENT_2 c=17 r=0 #MSG_LOAD_FILAMENT_2 c=17 r=0
"Load filament 2" "Load filament 2"
"Zavest filament 2" "Zavest filament 2"
#
"XYZ calibration failed. Right front calibration point not reachable."
"\x00"
#MSG_LOAD_FILAMENT_3 c=17 r=0 #MSG_LOAD_FILAMENT_3 c=17 r=0
"Load filament 3" "Load filament 3"
"Zavest filament 3" "Zavest filament 3"
#
"Y distance from min"
"\x00"
#
"Y-correct"
"\x00"
#MSG_LOAD_FILAMENT_4 c=17 r=0 #MSG_LOAD_FILAMENT_4 c=17 r=0
"Load filament 4" "Load filament 4"
"Zavest filament 4" "Zavest filament 4"

72
lang/lang_en_de.txt
View File

@ -58,6 +58,10 @@
"Auto deplete [on]" "Auto deplete [on]"
"Restemodus [an]" "Restemodus [an]"
#
"Auto deplete[N/A]"
"\x00"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"Auto deplete[off]" "Auto deplete[off]"
"Restemodus [aus]" "Restemodus [aus]"
@ -414,6 +418,10 @@
"First, I will run the selftest to check most common assembly problems." "First, I will run the selftest to check most common assembly problems."
"Zunaechst fuehre ich den Selbsttest durch, um die haeufigsten Probleme beim Zusammenbau zu ueberpruefen." "Zunaechst fuehre ich den Selbsttest durch, um die haeufigsten Probleme beim Zusammenbau zu ueberpruefen."
#
"Fix the issue and then press button on MMU unit."
"\x00"
#MSG_FLOW c=0 r=0 #MSG_FLOW c=0 r=0
"Flow" "Flow"
"Durchfluss" "Durchfluss"
@ -630,6 +638,10 @@
"M105 Invalid extruder " "M105 Invalid extruder "
"M105 Falscher Extruder " "M105 Falscher Extruder "
#
"Load to nozzle"
"\x00"
#MSG_M109_INVALID_EXTRUDER c=0 r=0 #MSG_M109_INVALID_EXTRUDER c=0 r=0
"M109 Invalid extruder " "M109 Invalid extruder "
"M109 Falscher Extruder " "M109 Falscher Extruder "
@ -686,6 +698,10 @@
"Mode [silent]" "Mode [silent]"
"Modus [leise]" "Modus [leise]"
#
"MMU needs user attention."
"\x00"
#MSG_STEALTH_MODE_ON c=0 r=0 #MSG_STEALTH_MODE_ON c=0 r=0
"Mode [Stealth]" "Mode [Stealth]"
"Modus [Stealth]" "Modus [Stealth]"
@ -742,6 +758,10 @@
"New firmware version available:" "New firmware version available:"
"\x00" "\x00"
#
"No "
"\x00"
#MSG_SELFTEST_FAN_NO c=19 r=0 #MSG_SELFTEST_FAN_NO c=19 r=0
"Not spinning" "Not spinning"
"Dreht sich nicht" "Dreht sich nicht"
@ -774,6 +794,10 @@
"open" "open"
"offen" "offen"
#
"Now remove the test print from steel sheet."
"\x00"
#MSG_SD_OPENROOT_FAIL c=0 r=0 #MSG_SD_OPENROOT_FAIL c=0 r=0
"openRoot failed" "openRoot failed"
"Zugriff auf Hauptverzeichnis misslungen" "Zugriff auf Hauptverzeichnis misslungen"
@ -870,6 +894,10 @@
"PowerUp" "PowerUp"
"Einschalten" "Einschalten"
#
"Please remove shipping helpers first."
"\x00"
#MSG_PREHEAT_NOZZLE c=20 r=0 #MSG_PREHEAT_NOZZLE c=20 r=0
"Preheat the nozzle!" "Preheat the nozzle!"
"Duese vorheizen!" "Duese vorheizen!"
@ -910,6 +938,10 @@
"Printer halted. kill() called!" "Printer halted. kill() called!"
"Printer gestoppt. kill() aufgerufen!" "Printer gestoppt. kill() aufgerufen!"
#
"Press the knob to resume nozzle temperature."
"\x00"
#MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8 #MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
"Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow." "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
"Drucker wurde noch nicht kalibriert. Bitte folgen Sie dem Handbuch, Kapitel Erste Schritte, Abschnitt Kalibrie- rungsablauf." "Drucker wurde noch nicht kalibriert. Bitte folgen Sie dem Handbuch, Kapitel Erste Schritte, Abschnitt Kalibrie- rungsablauf."
@ -942,6 +974,10 @@
"Remove old filament and press the knob to start loading new filament." "Remove old filament and press the knob to start loading new filament."
"Entfernen Sie das alte Filament und druecken Sie den Knopf, um das neue zu laden." "Entfernen Sie das alte Filament und druecken Sie den Knopf, um das neue zu laden."
#
"Prusa i3 MK2 ready."
"\x00"
#MSG_CALIBRATE_BED_RESET c=0 r=0 #MSG_CALIBRATE_BED_RESET c=0 r=0
"Reset XYZ calibr." "Reset XYZ calibr."
"XYZ Kalib.zurueck" "XYZ Kalib.zurueck"
@ -1094,6 +1130,10 @@
"Sound [mute]" "Sound [mute]"
"Sound [stumm]" "Sound [stumm]"
#
"Some problem encountered, Z-leveling enforced ..."
"\x00"
#MSG_SOUND_ONCE c=17 r=1 #MSG_SOUND_ONCE c=17 r=1
"Sound [once]" "Sound [once]"
"Sound [einmal]" "Sound [einmal]"
@ -1226,6 +1266,10 @@
"Waiting for PINDA probe cooling" "Waiting for PINDA probe cooling"
"Warten, bis PINDA- Sonde abgekuehlt ist" "Warten, bis PINDA- Sonde abgekuehlt ist"
#
"Use unload to remove filament 1 if it protrudes outside of the rear MMU tube. Use eject if it is hidden in tube."
"\x00"
#MSG_CHANGED_BOTH c=20 r=4 #MSG_CHANGED_BOTH c=20 r=4
"Warning: both printer type and motherboard type changed." "Warning: both printer type and motherboard type changed."
"Warnung: Druckertyp und Platinentyp wurden beide geaendert." "Warnung: Druckertyp und Platinentyp wurden beide geaendert."
@ -1274,6 +1318,10 @@
"XYZ calibration all right. X/Y axes are slightly skewed. Good job!" "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
"XYZ Kalibrierung in Ordnung. X/Y Achsen sind etwas schief." "XYZ Kalibrierung in Ordnung. X/Y Achsen sind etwas schief."
#
"X-correct"
"\x00"
#MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8 #MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
"XYZ calibration ok. X/Y axes are perpendicular. Congratulations!" "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
"XYZ-Kalibrierung OK. X/Y-Achsen sind senkrecht zueinander. Glueckwunsch!" "XYZ-Kalibrierung OK. X/Y-Achsen sind senkrecht zueinander. Glueckwunsch!"
@ -1298,14 +1346,38 @@
"Load filament 1" "Load filament 1"
"Filament 1 laden" "Filament 1 laden"
#
"XYZ calibration failed. Bed calibration point was not found."
"\x00"
#
"XYZ calibration failed. Front calibration points not reachable."
"\x00"
#
"XYZ calibration failed. Left front calibration point not reachable."
"\x00"
#MSG_LOAD_FILAMENT_2 c=17 r=0 #MSG_LOAD_FILAMENT_2 c=17 r=0
"Load filament 2" "Load filament 2"
"Filament 2 laden" "Filament 2 laden"
#
"XYZ calibration failed. Right front calibration point not reachable."
"\x00"
#MSG_LOAD_FILAMENT_3 c=17 r=0 #MSG_LOAD_FILAMENT_3 c=17 r=0
"Load filament 3" "Load filament 3"
"Filament 3 laden" "Filament 3 laden"
#
"Y distance from min"
"\x00"
#
"Y-correct"
"\x00"
#MSG_LOAD_FILAMENT_4 c=17 r=0 #MSG_LOAD_FILAMENT_4 c=17 r=0
"Load filament 4" "Load filament 4"
"Filament 4 laden" "Filament 4 laden"

72
lang/lang_en_es.txt
View File

@ -58,6 +58,10 @@
"Auto deplete [on]" "Auto deplete [on]"
"Auto despleg.[on]" "Auto despleg.[on]"
#
"Auto deplete[N/A]"
"\x00"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"Auto deplete[off]" "Auto deplete[off]"
"Auto despleg[off]" "Auto despleg[off]"
@ -414,6 +418,10 @@
"First, I will run the selftest to check most common assembly problems." "First, I will run the selftest to check most common assembly problems."
"Primero, hare el Selftest para comprobar los problemas de montaje mas comunes." "Primero, hare el Selftest para comprobar los problemas de montaje mas comunes."
#
"Fix the issue and then press button on MMU unit."
"\x00"
#MSG_FLOW c=0 r=0 #MSG_FLOW c=0 r=0
"Flow" "Flow"
"Flujo" "Flujo"
@ -630,6 +638,10 @@
"M105 Invalid extruder " "M105 Invalid extruder "
"M105 Extrusor invalido " "M105 Extrusor invalido "
#
"Load to nozzle"
"\x00"
#MSG_M109_INVALID_EXTRUDER c=0 r=0 #MSG_M109_INVALID_EXTRUDER c=0 r=0
"M109 Invalid extruder " "M109 Invalid extruder "
"M109 Extrusor invalido " "M109 Extrusor invalido "
@ -686,6 +698,10 @@
"Mode [silent]" "Mode [silent]"
"Modo [silencio]" "Modo [silencio]"
#
"MMU needs user attention."
"\x00"
#MSG_STEALTH_MODE_ON c=0 r=0 #MSG_STEALTH_MODE_ON c=0 r=0
"Mode [Stealth]" "Mode [Stealth]"
"Modo [Silencio]" "Modo [Silencio]"
@ -742,6 +758,10 @@
"New firmware version available:" "New firmware version available:"
"\x00" "\x00"
#
"No "
"\x00"
#MSG_SELFTEST_FAN_NO c=19 r=0 #MSG_SELFTEST_FAN_NO c=19 r=0
"Not spinning" "Not spinning"
"Ventilador no gira" "Ventilador no gira"
@ -774,6 +794,10 @@
"open" "open"
"abrir" "abrir"
#
"Now remove the test print from steel sheet."
"\x00"
#MSG_SD_OPENROOT_FAIL c=0 r=0 #MSG_SD_OPENROOT_FAIL c=0 r=0
"openRoot failed" "openRoot failed"
"fallo openRoot" "fallo openRoot"
@ -870,6 +894,10 @@
"PowerUp" "PowerUp"
"Encendido" "Encendido"
#
"Please remove shipping helpers first."
"\x00"
#MSG_PREHEAT_NOZZLE c=20 r=0 #MSG_PREHEAT_NOZZLE c=20 r=0
"Preheat the nozzle!" "Preheat the nozzle!"
"Precalienta extrusor!" "Precalienta extrusor!"
@ -910,6 +938,10 @@
"Printer halted. kill() called!" "Printer halted. kill() called!"
"Impresora detenida. kill() activado!" "Impresora detenida. kill() activado!"
#
"Press the knob to resume nozzle temperature."
"\x00"
#MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8 #MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
"Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow." "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
"Impresora no esta calibrada todavia. Por favor usa el manual capitulo Primeros pasos Calibracion flujo." "Impresora no esta calibrada todavia. Por favor usa el manual capitulo Primeros pasos Calibracion flujo."
@ -942,6 +974,10 @@
"Remove old filament and press the knob to start loading new filament." "Remove old filament and press the knob to start loading new filament."
"Retire el filamento viejo y presione el dial para comenzar a cargar el nuevo filamento." "Retire el filamento viejo y presione el dial para comenzar a cargar el nuevo filamento."
#
"Prusa i3 MK2 ready."
"\x00"
#MSG_CALIBRATE_BED_RESET c=0 r=0 #MSG_CALIBRATE_BED_RESET c=0 r=0
"Reset XYZ calibr." "Reset XYZ calibr."
"\x00" "\x00"
@ -1094,6 +1130,10 @@
"Sound [mute]" "Sound [mute]"
"Sonido [silenc.]" "Sonido [silenc.]"
#
"Some problem encountered, Z-leveling enforced ..."
"\x00"
#MSG_SOUND_ONCE c=17 r=1 #MSG_SOUND_ONCE c=17 r=1
"Sound [once]" "Sound [once]"
"Sonido [una vez]" "Sonido [una vez]"
@ -1226,6 +1266,10 @@
"Waiting for PINDA probe cooling" "Waiting for PINDA probe cooling"
"Esperando a que se enfrie la sonda PINDA" "Esperando a que se enfrie la sonda PINDA"
#
"Use unload to remove filament 1 if it protrudes outside of the rear MMU tube. Use eject if it is hidden in tube."
"\x00"
#MSG_CHANGED_BOTH c=20 r=4 #MSG_CHANGED_BOTH c=20 r=4
"Warning: both printer type and motherboard type changed." "Warning: both printer type and motherboard type changed."
"Aviso: tanto el tipo de impresora como el tipo de la placa han cambiado." "Aviso: tanto el tipo de impresora como el tipo de la placa han cambiado."
@ -1274,6 +1318,10 @@
"XYZ calibration all right. X/Y axes are slightly skewed. Good job!" "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
"Calibracion XYZ correcta. Los ejes X / Y estan ligeramente inclinados. Buen trabajo!" "Calibracion XYZ correcta. Los ejes X / Y estan ligeramente inclinados. Buen trabajo!"
#
"X-correct"
"\x00"
#MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8 #MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
"XYZ calibration ok. X/Y axes are perpendicular. Congratulations!" "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
"Calibracion XYZ ok. Ejes X/Y perpendiculares. Enhorabuena!" "Calibracion XYZ ok. Ejes X/Y perpendiculares. Enhorabuena!"
@ -1298,14 +1346,38 @@
"Load filament 1" "Load filament 1"
"Introducir fil. 1" "Introducir fil. 1"
#
"XYZ calibration failed. Bed calibration point was not found."
"\x00"
#
"XYZ calibration failed. Front calibration points not reachable."
"\x00"
#
"XYZ calibration failed. Left front calibration point not reachable."
"\x00"
#MSG_LOAD_FILAMENT_2 c=17 r=0 #MSG_LOAD_FILAMENT_2 c=17 r=0
"Load filament 2" "Load filament 2"
"Introducir fil. 2" "Introducir fil. 2"
#
"XYZ calibration failed. Right front calibration point not reachable."
"\x00"
#MSG_LOAD_FILAMENT_3 c=17 r=0 #MSG_LOAD_FILAMENT_3 c=17 r=0
"Load filament 3" "Load filament 3"
"Introducir fil. 3" "Introducir fil. 3"
#
"Y distance from min"
"\x00"
#
"Y-correct"
"\x00"
#MSG_LOAD_FILAMENT_4 c=17 r=0 #MSG_LOAD_FILAMENT_4 c=17 r=0
"Load filament 4" "Load filament 4"
"Introducir fil. 4" "Introducir fil. 4"

72
lang/lang_en_fr.txt
View File

@ -58,6 +58,10 @@
"Auto deplete [on]" "Auto deplete [on]"
"Purge auto [on]" "Purge auto [on]"
#
"Auto deplete[N/A]"
"\x00"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"Auto deplete[off]" "Auto deplete[off]"
"Purge auto [off]" "Purge auto [off]"
@ -414,6 +418,10 @@
"First, I will run the selftest to check most common assembly problems." "First, I will run the selftest to check most common assembly problems."
"D'abord, je vais lancer l'autotest pour verifier les problemes d'assemblage les plus communs." "D'abord, je vais lancer l'autotest pour verifier les problemes d'assemblage les plus communs."
#
"Fix the issue and then press button on MMU unit."
"\x00"
#MSG_FLOW c=0 r=0 #MSG_FLOW c=0 r=0
"Flow" "Flow"
"Flux" "Flux"
@ -630,6 +638,10 @@
"M105 Invalid extruder " "M105 Invalid extruder "
"M105 extrudeur invalide " "M105 extrudeur invalide "
#
"Load to nozzle"
"\x00"
#MSG_M109_INVALID_EXTRUDER c=0 r=0 #MSG_M109_INVALID_EXTRUDER c=0 r=0
"M109 Invalid extruder " "M109 Invalid extruder "
"M109 extrudeur invalide " "M109 extrudeur invalide "
@ -686,6 +698,10 @@
"Mode [silent]" "Mode [silent]"
"Mode [silencieux]" "Mode [silencieux]"
#
"MMU needs user attention."
"\x00"
#MSG_STEALTH_MODE_ON c=0 r=0 #MSG_STEALTH_MODE_ON c=0 r=0
"Mode [Stealth]" "Mode [Stealth]"
"Mode [Furtif]" "Mode [Furtif]"
@ -742,6 +758,10 @@
"Not connected" "Not connected"
"Non connecte" "Non connecte"
#
"No "
"\x00"
#MSG_SELFTEST_FAN_NO c=19 r=0 #MSG_SELFTEST_FAN_NO c=19 r=0
"Not spinning" "Not spinning"
"Ne tourne pas" "Ne tourne pas"
@ -774,6 +794,10 @@
"open" "open"
"ouvrir" "ouvrir"
#
"Now remove the test print from steel sheet."
"\x00"
#MSG_SD_OPENROOT_FAIL c=0 r=0 #MSG_SD_OPENROOT_FAIL c=0 r=0
"openRoot failed" "openRoot failed"
"Echec openRoot" "Echec openRoot"
@ -870,6 +894,10 @@
"Please wait" "Please wait"
"Merci de patienter" "Merci de patienter"
#
"Please remove shipping helpers first."
"\x00"
#MSG_POWERUP c=0 r=0 #MSG_POWERUP c=0 r=0
"PowerUp" "PowerUp"
"Demarrage" "Demarrage"
@ -910,6 +938,10 @@
"Printer halted. kill() called!" "Printer halted. kill() called!"
"Imprimante stoppee. kill() appelee !" "Imprimante stoppee. kill() appelee !"
#
"Press the knob to resume nozzle temperature."
"\x00"
#MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8 #MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
"Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow." "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
"L'imprimante n'a pas encore ete calibree. Suivez le manuel, chapitre Premiers pas, section Processus de calibration" "L'imprimante n'a pas encore ete calibree. Suivez le manuel, chapitre Premiers pas, section Processus de calibration"
@ -942,6 +974,10 @@
"Resend" "Resend"
"\x00" "\x00"
#
"Prusa i3 MK2 ready."
"\x00"
#MSG_REMOVE_OLD_FILAMENT c=20 r=4 #MSG_REMOVE_OLD_FILAMENT c=20 r=4
"Remove old filament and press the knob to start loading new filament." "Remove old filament and press the knob to start loading new filament."
"Retirez l'ancien filament puis appuyez sur le bouton pour charger le nouveau." "Retirez l'ancien filament puis appuyez sur le bouton pour charger le nouveau."
@ -1094,6 +1130,10 @@
"Sound [mute]" "Sound [mute]"
"Son [muet]" "Son [muet]"
#
"Some problem encountered, Z-leveling enforced ..."
"\x00"
#MSG_SOUND_ONCE c=17 r=1 #MSG_SOUND_ONCE c=17 r=1
"Sound [once]" "Sound [once]"
"Son [une fois]" "Son [une fois]"
@ -1226,6 +1266,10 @@
"Waiting for PINDA probe cooling" "Waiting for PINDA probe cooling"
"Attente du refroidissement de la sonde PINDA" "Attente du refroidissement de la sonde PINDA"
#
"Use unload to remove filament 1 if it protrudes outside of the rear MMU tube. Use eject if it is hidden in tube."
"\x00"
#MSG_CHANGED_BOTH c=20 r=4 #MSG_CHANGED_BOTH c=20 r=4
"Warning: both printer type and motherboard type changed." "Warning: both printer type and motherboard type changed."
"Attention : Types d'imprimante et de carte mere modifies." "Attention : Types d'imprimante et de carte mere modifies."
@ -1274,6 +1318,10 @@
"XYZ calibration all right. X/Y axes are slightly skewed. Good job!" "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
"\x00" "\x00"
#
"X-correct"
"\x00"
#MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8 #MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
"XYZ calibration ok. X/Y axes are perpendicular. Congratulations!" "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
"\x00" "\x00"
@ -1298,14 +1346,38 @@
"Load filament 1" "Load filament 1"
"\x00" "\x00"
#
"XYZ calibration failed. Bed calibration point was not found."
"\x00"
#
"XYZ calibration failed. Front calibration points not reachable."
"\x00"
#
"XYZ calibration failed. Left front calibration point not reachable."
"\x00"
#MSG_LOAD_FILAMENT_2 c=17 r=0 #MSG_LOAD_FILAMENT_2 c=17 r=0
"Load filament 2" "Load filament 2"
"\x00" "\x00"
#
"XYZ calibration failed. Right front calibration point not reachable."
"\x00"
#MSG_LOAD_FILAMENT_3 c=17 r=0 #MSG_LOAD_FILAMENT_3 c=17 r=0
"Load filament 3" "Load filament 3"
"\x00" "\x00"
#
"Y distance from min"
"\x00"
#
"Y-correct"
"\x00"
#MSG_LOAD_FILAMENT_4 c=17 r=0 #MSG_LOAD_FILAMENT_4 c=17 r=0
"Load filament 4" "Load filament 4"
"\x00" "\x00"

72
lang/lang_en_it.txt
View File

@ -58,6 +58,10 @@
"Auto deplete [on]" "Auto deplete [on]"
"Esaurim.auto [on]" "Esaurim.auto [on]"
#
"Auto deplete[N/A]"
"\x00"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"Auto deplete[off]" "Auto deplete[off]"
"Esaurim.auto[off]" "Esaurim.auto[off]"
@ -414,6 +418,10 @@
"First, I will run the selftest to check most common assembly problems." "First, I will run the selftest to check most common assembly problems."
"Per primo avviero l'autotest per controllare gli errori di assemblaggio piu comuni." "Per primo avviero l'autotest per controllare gli errori di assemblaggio piu comuni."
#
"Fix the issue and then press button on MMU unit."
"\x00"
#MSG_FLOW c=0 r=0 #MSG_FLOW c=0 r=0
"Flow" "Flow"
"Flusso" "Flusso"
@ -630,6 +638,10 @@
"M105 Invalid extruder " "M105 Invalid extruder "
"M105 Estrusore non valido " "M105 Estrusore non valido "
#
"Load to nozzle"
"\x00"
#MSG_M109_INVALID_EXTRUDER c=0 r=0 #MSG_M109_INVALID_EXTRUDER c=0 r=0
"M109 Invalid extruder " "M109 Invalid extruder "
"M109 Estrusore non valido " "M109 Estrusore non valido "
@ -686,6 +698,10 @@
"Mode [silent]" "Mode [silent]"
"Modo [silenzioso]" "Modo [silenzioso]"
#
"MMU needs user attention."
"\x00"
#MSG_STEALTH_MODE_ON c=0 r=0 #MSG_STEALTH_MODE_ON c=0 r=0
"Mode [Stealth]" "Mode [Stealth]"
"Modo [Silenziosa]" "Modo [Silenziosa]"
@ -742,6 +758,10 @@
"New firmware version available:" "New firmware version available:"
"\x00" "\x00"
#
"No "
"\x00"
#MSG_SELFTEST_FAN_NO c=19 r=0 #MSG_SELFTEST_FAN_NO c=19 r=0
"Not spinning" "Not spinning"
"Non gira" "Non gira"
@ -774,6 +794,10 @@
"open" "open"
"apri" "apri"
#
"Now remove the test print from steel sheet."
"\x00"
#MSG_SD_OPENROOT_FAIL c=0 r=0 #MSG_SD_OPENROOT_FAIL c=0 r=0
"openRoot failed" "openRoot failed"
"openRoot fallito" "openRoot fallito"
@ -870,6 +894,10 @@
"PowerUp" "PowerUp"
"Accendi" "Accendi"
#
"Please remove shipping helpers first."
"\x00"
#MSG_PREHEAT_NOZZLE c=20 r=0 #MSG_PREHEAT_NOZZLE c=20 r=0
"Preheat the nozzle!" "Preheat the nozzle!"
"Prerisc. ugello!" "Prerisc. ugello!"
@ -910,6 +938,10 @@
"Printer halted. kill() called!" "Printer halted. kill() called!"
"Stampante ferma. kill () chiamato!" "Stampante ferma. kill () chiamato!"
#
"Press the knob to resume nozzle temperature."
"\x00"
#MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8 #MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
"Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow." "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
"Stampante non ancora calibrata. Si prega di seguire il manuale, capitolo Primi Passi, sezione Sequenza di Calibrazione." "Stampante non ancora calibrata. Si prega di seguire il manuale, capitolo Primi Passi, sezione Sequenza di Calibrazione."
@ -942,6 +974,10 @@
"Remove old filament and press the knob to start loading new filament." "Remove old filament and press the knob to start loading new filament."
"Rimuovi il filamento precedente e premi la manopola per caricare il nuovo filamento." "Rimuovi il filamento precedente e premi la manopola per caricare il nuovo filamento."
#
"Prusa i3 MK2 ready."
"\x00"
#MSG_CALIBRATE_BED_RESET c=0 r=0 #MSG_CALIBRATE_BED_RESET c=0 r=0
"Reset XYZ calibr." "Reset XYZ calibr."
"Reset calibrazione XYZ." "Reset calibrazione XYZ."
@ -1094,6 +1130,10 @@
"Sound [mute]" "Sound [mute]"
"Suono [mute]" "Suono [mute]"
#
"Some problem encountered, Z-leveling enforced ..."
"\x00"
#MSG_SOUND_ONCE c=17 r=1 #MSG_SOUND_ONCE c=17 r=1
"Sound [once]" "Sound [once]"
"Suono [singolo]" "Suono [singolo]"
@ -1226,6 +1266,10 @@
"Waiting for PINDA probe cooling" "Waiting for PINDA probe cooling"
"In attesa del raffreddamento della sonda PINDA" "In attesa del raffreddamento della sonda PINDA"
#
"Use unload to remove filament 1 if it protrudes outside of the rear MMU tube. Use eject if it is hidden in tube."
"\x00"
#MSG_CHANGED_BOTH c=20 r=4 #MSG_CHANGED_BOTH c=20 r=4
"Warning: both printer type and motherboard type changed." "Warning: both printer type and motherboard type changed."
"Attenzione: tipo di stampante e di scheda madre cambiati." "Attenzione: tipo di stampante e di scheda madre cambiati."
@ -1274,6 +1318,10 @@
"XYZ calibration all right. X/Y axes are slightly skewed. Good job!" "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
"Calibrazion XYZ corretta. Assi X/Y leggermente storti. Ben fatto!" "Calibrazion XYZ corretta. Assi X/Y leggermente storti. Ben fatto!"
#
"X-correct"
"\x00"
#MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8 #MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
"XYZ calibration ok. X/Y axes are perpendicular. Congratulations!" "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
"Calibrazione XYZ OK. Gli assi X/Y sono perpendicolari. Complimenti!" "Calibrazione XYZ OK. Gli assi X/Y sono perpendicolari. Complimenti!"
@ -1298,14 +1346,38 @@
"Load filament 1" "Load filament 1"
"Caricare fil. 1" "Caricare fil. 1"
#
"XYZ calibration failed. Bed calibration point was not found."
"\x00"
#
"XYZ calibration failed. Front calibration points not reachable."
"\x00"
#
"XYZ calibration failed. Left front calibration point not reachable."
"\x00"
#MSG_LOAD_FILAMENT_2 c=17 r=0 #MSG_LOAD_FILAMENT_2 c=17 r=0
"Load filament 2" "Load filament 2"
"Caricare fil. 2" "Caricare fil. 2"
#
"XYZ calibration failed. Right front calibration point not reachable."
"\x00"
#MSG_LOAD_FILAMENT_3 c=17 r=0 #MSG_LOAD_FILAMENT_3 c=17 r=0
"Load filament 3" "Load filament 3"
"Caricare fil. 3" "Caricare fil. 3"
#
"Y distance from min"
"\x00"
#
"Y-correct"
"\x00"
#MSG_LOAD_FILAMENT_4 c=17 r=0 #MSG_LOAD_FILAMENT_4 c=17 r=0
"Load filament 4" "Load filament 4"
"Caricare fil. 4" "Caricare fil. 4"

72
lang/lang_en_pl.txt
View File

@ -58,6 +58,10 @@
"Auto deplete [on]" "Auto deplete [on]"
"Wyk. resztek [wl]" "Wyk. resztek [wl]"
#
"Auto deplete[N/A]"
"\x00"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"Auto deplete[off]" "Auto deplete[off]"
"Wyk. resztek[wyl]" "Wyk. resztek[wyl]"
@ -414,6 +418,10 @@
"First, I will run the selftest to check most common assembly problems." "First, I will run the selftest to check most common assembly problems."
"Najpierw wlacze selftest w celu sprawdzenia najczestszych problemow podczas montazu." "Najpierw wlacze selftest w celu sprawdzenia najczestszych problemow podczas montazu."
#
"Fix the issue and then press button on MMU unit."
"\x00"
#MSG_FLOW c=0 r=0 #MSG_FLOW c=0 r=0
"Flow" "Flow"
"Przeplyw" "Przeplyw"
@ -630,6 +638,10 @@
"M105 Invalid extruder " "M105 Invalid extruder "
"M105 Nieprawidlowy ekstruder " "M105 Nieprawidlowy ekstruder "
#
"Load to nozzle"
"\x00"
#MSG_M109_INVALID_EXTRUDER c=0 r=0 #MSG_M109_INVALID_EXTRUDER c=0 r=0
"M109 Invalid extruder " "M109 Invalid extruder "
"M109 Nieprawidlowy ekstruder " "M109 Nieprawidlowy ekstruder "
@ -686,6 +698,10 @@
"Mode [silent]" "Mode [silent]"
"Tryb [cichy]" "Tryb [cichy]"
#
"MMU needs user attention."
"\x00"
#MSG_STEALTH_MODE_ON c=0 r=0 #MSG_STEALTH_MODE_ON c=0 r=0
"Mode [Stealth]" "Mode [Stealth]"
"Tryb [Stealth]" "Tryb [Stealth]"
@ -742,6 +758,10 @@
"New firmware version available:" "New firmware version available:"
"\x00" "\x00"
#
"No "
"\x00"
#MSG_SELFTEST_FAN_NO c=19 r=0 #MSG_SELFTEST_FAN_NO c=19 r=0
"Not spinning" "Not spinning"
"Nie kreci sie" "Nie kreci sie"
@ -774,6 +794,10 @@
"open" "open"
"otworz" "otworz"
#
"Now remove the test print from steel sheet."
"\x00"
#MSG_SD_OPENROOT_FAIL c=0 r=0 #MSG_SD_OPENROOT_FAIL c=0 r=0
"openRoot failed" "openRoot failed"
"niepowodzenie openRoot" "niepowodzenie openRoot"
@ -870,6 +894,10 @@
"PowerUp" "PowerUp"
"Uruchamianie" "Uruchamianie"
#
"Please remove shipping helpers first."
"\x00"
#MSG_PREHEAT_NOZZLE c=20 r=0 #MSG_PREHEAT_NOZZLE c=20 r=0
"Preheat the nozzle!" "Preheat the nozzle!"
"Nagrzej dysze!" "Nagrzej dysze!"
@ -910,6 +938,10 @@
"Printer halted. kill() called!" "Printer halted. kill() called!"
"Drukarka zatrzymana. Wywolano komende kill()!" "Drukarka zatrzymana. Wywolano komende kill()!"
#
"Press the knob to resume nozzle temperature."
"\x00"
#MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8 #MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
"Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow." "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
"Drukarka nie zostala jeszcze skalibrowana. Kieruj sie Samouczkiem: rozdzial Pierwsze Kroki, sekcja Konfiguracja przed drukowaniem." "Drukarka nie zostala jeszcze skalibrowana. Kieruj sie Samouczkiem: rozdzial Pierwsze Kroki, sekcja Konfiguracja przed drukowaniem."
@ -942,6 +974,10 @@
"Remove old filament and press the knob to start loading new filament." "Remove old filament and press the knob to start loading new filament."
"Wyciagnij poprzedni filament i nacisnij pokretlo aby zaladowac nowy." "Wyciagnij poprzedni filament i nacisnij pokretlo aby zaladowac nowy."
#
"Prusa i3 MK2 ready."
"\x00"
#MSG_CALIBRATE_BED_RESET c=0 r=0 #MSG_CALIBRATE_BED_RESET c=0 r=0
"Reset XYZ calibr." "Reset XYZ calibr."
"Reset kalibr. XYZ" "Reset kalibr. XYZ"
@ -1094,6 +1130,10 @@
"Sound [mute]" "Sound [mute]"
"Dzwiek[Wylaczony]" "Dzwiek[Wylaczony]"
#
"Some problem encountered, Z-leveling enforced ..."
"\x00"
#MSG_SOUND_ONCE c=17 r=1 #MSG_SOUND_ONCE c=17 r=1
"Sound [once]" "Sound [once]"
"Dzwiek [1-raz]" "Dzwiek [1-raz]"
@ -1226,6 +1266,10 @@
"Waiting for PINDA probe cooling" "Waiting for PINDA probe cooling"
"Czekam az spadnie temp. sondy PINDA" "Czekam az spadnie temp. sondy PINDA"
#
"Use unload to remove filament 1 if it protrudes outside of the rear MMU tube. Use eject if it is hidden in tube."
"\x00"
#MSG_CHANGED_BOTH c=20 r=4 #MSG_CHANGED_BOTH c=20 r=4
"Warning: both printer type and motherboard type changed." "Warning: both printer type and motherboard type changed."
"Ostrzezenie: typ drukarki i plyta glowna ulegly zmianie." "Ostrzezenie: typ drukarki i plyta glowna ulegly zmianie."
@ -1274,6 +1318,10 @@
"XYZ calibration all right. X/Y axes are slightly skewed. Good job!" "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
"Kalibracja XYZ prawidlowa. Osie X/Y lekko skosne. Dobra robota!" "Kalibracja XYZ prawidlowa. Osie X/Y lekko skosne. Dobra robota!"
#
"X-correct"
"\x00"
#MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8 #MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
"XYZ calibration ok. X/Y axes are perpendicular. Congratulations!" "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
"Kalibracja XYZ ok. Osie X/Y sa prostopadle. Gratulacje!" "Kalibracja XYZ ok. Osie X/Y sa prostopadle. Gratulacje!"
@ -1298,14 +1346,38 @@
"Load filament 1" "Load filament 1"
"Zaladowac fil. 1" "Zaladowac fil. 1"
#
"XYZ calibration failed. Bed calibration point was not found."
"\x00"
#
"XYZ calibration failed. Front calibration points not reachable."
"\x00"
#
"XYZ calibration failed. Left front calibration point not reachable."
"\x00"
#MSG_LOAD_FILAMENT_2 c=17 r=0 #MSG_LOAD_FILAMENT_2 c=17 r=0
"Load filament 2" "Load filament 2"
"Zaladowac fil. 2" "Zaladowac fil. 2"
#
"XYZ calibration failed. Right front calibration point not reachable."
"\x00"
#MSG_LOAD_FILAMENT_3 c=17 r=0 #MSG_LOAD_FILAMENT_3 c=17 r=0
"Load filament 3" "Load filament 3"
"Zaladowac fil. 3" "Zaladowac fil. 3"
#
"Y distance from min"
"\x00"
#
"Y-correct"
"\x00"
#MSG_LOAD_FILAMENT_4 c=17 r=0 #MSG_LOAD_FILAMENT_4 c=17 r=0
"Load filament 4" "Load filament 4"
"Zaladowac fil. 4" "Zaladowac fil. 4"