From 068f4763e2055dacbf660ace4e2ee72a30e0fdce Mon Sep 17 00:00:00 2001 From: 3d-gussner <3d.gussner@gmail.com> Date: Sat, 17 Sep 2022 16:53:30 +0200 Subject: [PATCH] Update translatable strings to match our extraction macros Update pot and po files --- Firmware/mmu2/errors_list.h | 74 ++++++++++++++++++------------------- lang/po/Firmware.pot | 50 ++++++++++++++++--------- lang/po/Firmware_cs.po | 50 ++++++++++++++++--------- lang/po/Firmware_da.po | 50 ++++++++++++++++--------- lang/po/Firmware_de.po | 50 ++++++++++++++++--------- lang/po/Firmware_es.po | 50 ++++++++++++++++--------- lang/po/Firmware_fr.po | 50 ++++++++++++++++--------- lang/po/Firmware_hr.po | 50 ++++++++++++++++--------- lang/po/Firmware_hu.po | 50 ++++++++++++++++--------- lang/po/Firmware_it.po | 50 ++++++++++++++++--------- lang/po/Firmware_lb.po | 50 ++++++++++++++++--------- lang/po/Firmware_lt.po | 50 ++++++++++++++++--------- lang/po/Firmware_nl.po | 65 ++++++++++++++++++++------------ lang/po/Firmware_no.po | 50 ++++++++++++++++--------- lang/po/Firmware_pl.po | 50 ++++++++++++++++--------- lang/po/Firmware_ro.po | 50 ++++++++++++++++--------- lang/po/Firmware_sk.po | 50 ++++++++++++++++--------- lang/po/Firmware_sl.po | 50 ++++++++++++++++--------- lang/po/Firmware_sv.po | 50 ++++++++++++++++--------- 19 files changed, 639 insertions(+), 350 deletions(-) diff --git a/Firmware/mmu2/errors_list.h b/Firmware/mmu2/errors_list.h index 4edf5f2d6..a7eddbda0 100644 --- a/Firmware/mmu2/errors_list.h +++ b/Firmware/mmu2/errors_list.h @@ -200,7 +200,7 @@ static const char MSG_DESC_FSENSOR_DIDNT_GO_OFF[] PROGMEM_I1 = ISTR("Filament se static const char MSG_DESC_PULLEY_STALLED[] PROGMEM_I1 = ISTR("Pulley motor stalled. Ensure the pulley can move and check the wiring."); ////MSG_DESC_PULLEY_STALLED c=20 r=8 static const char MSG_DESC_FSENSOR_TOO_EARLY[] PROGMEM_I1 = ISTR("Filament sensor triggered too early while loading to extruder. Check there isn't anything stuck in PTFE tube. Check that sensor reads properly."); ////MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 static const char MSG_DESC_SELECTOR_CANNOT_HOME[] PROGMEM_I1 = ISTR("The Selector cannot home properly. Check for anything blocking its movement."); ////MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -static const char MSG_DESC_CANNOT_MOVE[] PROGMEM_I1 = ISTR(""); // these errors have been disabled +static const char MSG_DESC_CANNOT_MOVE[] PROGMEM_I1 = ISTR(" "); /////MSG_DESC_CANNOT_MOVE c=20 //these errors have been disabled //static const char MSG_DESC_SELECTOR_CANNOT_MOVE[] PROGMEM_I1 = ISTR("The Selector cannot move. Check for anything blocking its movement. Check the wiring is correct."); static const char MSG_DESC_IDLER_CANNOT_HOME[] PROGMEM_I1 = ISTR("The Idler cannot home properly. Check for anything blocking its movement."); ////MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 //static const char MSG_DESC_IDLER_CANNOT_MOVE[] PROGMEM_I1 = ISTR("The Idler cannot move properly. Check for anything blocking its movement. Check the wiring is correct."); @@ -233,42 +233,42 @@ static const char MSG_DESC_FW_RUNTIME_ERROR[] PROGMEM_I1 = ISTR("Internal runtim static const char MSG_DESC_UNLOAD_MANUALLY[] PROGMEM_I1 = ISTR("Unexpected FINDA reading. Ensure no filament is under FINDA and the selector is free. Check FINDA connection."); ////MSG_DESC_UNLOAD_MANUALLY c=20 r=8 static const char * const errorDescs[] PROGMEM = { - MSG_DESC_FINDA_DIDNT_TRIGGER, - MSG_DESC_FINDA_DIDNT_GO_OFF, - MSG_DESC_FSENSOR_DIDNT_TRIGGER, - MSG_DESC_FSENSOR_DIDNT_GO_OFF, - MSG_DESC_PULLEY_STALLED, - MSG_DESC_FSENSOR_TOO_EARLY, - MSG_DESC_SELECTOR_CANNOT_HOME, - MSG_DESC_CANNOT_MOVE, - MSG_DESC_IDLER_CANNOT_HOME, - MSG_DESC_CANNOT_MOVE, - MSG_DESC_TMC, // descPULLEY_WARNING_TMC_TOO_HOT, - MSG_DESC_TMC, // descSELECTOR_WARNING_TMC_TOO_HOT, - MSG_DESC_TMC, // descIDLER_WARNING_TMC_TOO_HOT, - MSG_DESC_TMC, // descPULLEY_TMC_OVERHEAT_ERROR, - MSG_DESC_TMC, // descSELECTOR_TMC_OVERHEAT_ERROR, - MSG_DESC_TMC, // descIDLER_TMC_OVERHEAT_ERROR, - MSG_DESC_TMC, // descPULLEY_TMC_DRIVER_ERROR, - MSG_DESC_TMC, // descSELECTOR_TMC_DRIVER_ERROR, - MSG_DESC_TMC, // descIDLER_TMC_DRIVER_ERROR, - MSG_DESC_TMC, // descPULLEY_TMC_DRIVER_RESET, - MSG_DESC_TMC, // descSELECTOR_TMC_DRIVER_RESET, - MSG_DESC_TMC, // descIDLER_TMC_DRIVER_RESET, - MSG_DESC_TMC, // descPULLEY_TMC_UNDERVOLTAGE_ERROR, - MSG_DESC_TMC, // descSELECTOR_TMC_UNDERVOLTAGE_ERROR, - MSG_DESC_TMC, // descIDLER_TMC_UNDERVOLTAGE_ERROR, - MSG_DESC_TMC, // descPULLEY_TMC_DRIVER_SHORTED, - MSG_DESC_TMC, // descSELECTOR_TMC_DRIVER_SHORTED, - MSG_DESC_TMC, // descIDLER_TMC_DRIVER_SHORTED, - MSG_DESC_MMU_NOT_RESPONDING, - MSG_DESC_COMMUNICATION_ERROR, - MSG_DESC_FILAMENT_ALREADY_LOADED, - MSG_DESC_INVALID_TOOL, - MSG_DESC_QUEUE_FULL, - MSG_DESC_FW_UPDATE_NEEDED, - MSG_DESC_FW_RUNTIME_ERROR, - MSG_DESC_UNLOAD_MANUALLY + _R(MSG_DESC_FINDA_DIDNT_TRIGGER), + _R(MSG_DESC_FINDA_DIDNT_GO_OFF), + _R(MSG_DESC_FSENSOR_DIDNT_TRIGGER), + _R(MSG_DESC_FSENSOR_DIDNT_GO_OFF), + _R(MSG_DESC_PULLEY_STALLED), + _R(MSG_DESC_FSENSOR_TOO_EARLY), + _R(MSG_DESC_SELECTOR_CANNOT_HOME), + _R(MSG_DESC_CANNOT_MOVE), + _R(MSG_DESC_IDLER_CANNOT_HOME), + _R(MSG_DESC_CANNOT_MOVE), + _R(MSG_DESC_TMC), // descPULLEY_WARNING_TMC_TOO_HOT + _R(MSG_DESC_TMC), // descSELECTOR_WARNING_TMC_TOO_HOT + _R(MSG_DESC_TMC), // descIDLER_WARNING_TMC_TOO_HOT + _R(MSG_DESC_TMC), // descPULLEY_TMC_OVERHEAT_ERROR + _R(MSG_DESC_TMC), // descSELECTOR_TMC_OVERHEAT_ERROR + _R(MSG_DESC_TMC), // descIDLER_TMC_OVERHEAT_ERROR + _R(MSG_DESC_TMC), // descPULLEY_TMC_DRIVER_ERROR + _R(MSG_DESC_TMC), // descSELECTOR_TMC_DRIVER_ERROR + _R(MSG_DESC_TMC), // descIDLER_TMC_DRIVER_ERROR + _R(MSG_DESC_TMC), // descPULLEY_TMC_DRIVER_RESET + _R(MSG_DESC_TMC), // descSELECTOR_TMC_DRIVER_RESET + _R(MSG_DESC_TMC), // descIDLER_TMC_DRIVER_RESET + _R(MSG_DESC_TMC), // descPULLEY_TMC_UNDERVOLTAGE_ERROR + _R(MSG_DESC_TMC), // descSELECTOR_TMC_UNDERVOLTAGE_ERROR + _R(MSG_DESC_TMC), // descIDLER_TMC_UNDERVOLTAGE_ERROR + _R(MSG_DESC_TMC), // descPULLEY_TMC_DRIVER_SHORTED + _R(MSG_DESC_TMC), // descSELECTOR_TMC_DRIVER_SHORTED + _R(MSG_DESC_TMC), // descIDLER_TMC_DRIVER_SHORTED + _R(MSG_DESC_MMU_NOT_RESPONDING), + _R(MSG_DESC_COMMUNICATION_ERROR), + _R(MSG_DESC_FILAMENT_ALREADY_LOADED), + _R(MSG_DESC_INVALID_TOOL), + _R(MSG_DESC_QUEUE_FULL), + _R(MSG_DESC_FW_UPDATE_NEEDED), + _R(MSG_DESC_FW_RUNTIME_ERROR), + _R(MSG_DESC_UNLOAD_MANUALLY) }; // we have max 3 buttons/operations to select from diff --git a/lang/po/Firmware.pot b/lang/po/Firmware.pot index 9a67edb84..0eb0c7aa1 100644 --- a/lang/po/Firmware.pot +++ b/lang/po/Firmware.pot @@ -6,6 +6,13 @@ msgstr "" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -242,7 +249,7 @@ msgid "Calibration done" msgstr "" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "" "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" @@ -549,14 +556,14 @@ msgid "FINDA DIDNT TRIGGER" msgstr "" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." msgstr "" #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -690,21 +697,21 @@ msgid "Filament sensor" msgstr "" #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." @@ -920,7 +927,7 @@ msgid "" msgstr "" #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware." " If the issue persists, contact support." @@ -1045,7 +1052,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "" @@ -1077,14 +1084,14 @@ msgid "MMU load fails" msgstr "" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." msgstr "" #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1157,7 +1164,16 @@ msgid "Model" msgstr "" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "" @@ -1618,7 +1634,7 @@ msgid "" msgstr "" #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" @@ -1659,7 +1675,7 @@ msgid "Rename" msgstr "" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2043,20 +2059,20 @@ msgid "Testing filament" msgstr "" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." msgstr "" #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2119,7 +2135,7 @@ msgid "UNLOAD MANUALLY" msgstr "" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector" " is free. Check FINDA connection." diff --git a/lang/po/Firmware_cs.po b/lang/po/Firmware_cs.po index 6008dba82..06fef3b97 100644 --- a/lang/po/Firmware_cs.po +++ b/lang/po/Firmware_cs.po @@ -15,6 +15,13 @@ msgstr "" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -258,7 +265,7 @@ msgid "Calibration done" msgstr "Kalibrace OK" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" @@ -570,14 +577,14 @@ msgid "FINDA DIDNT TRIGGER" msgstr "" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." msgstr "" #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -711,21 +718,21 @@ msgid "Filament sensor" msgstr "Senzor filamentu" #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." @@ -954,7 +961,7 @@ msgid "" msgstr "Vlozte filament (nezavadejte) do extruderu a stisknete tlacitko" #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware. " "If the issue persists, contact support." @@ -1079,7 +1086,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "" @@ -1111,14 +1118,14 @@ msgid "MMU load fails" msgstr "MMU selhani zav" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." msgstr "" #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1191,7 +1198,16 @@ msgid "Model" msgstr "" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "" @@ -1666,7 +1682,7 @@ msgstr "" "Tisk zrusen." #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" @@ -1707,7 +1723,7 @@ msgid "Rename" msgstr "Prejmenovat" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2099,20 +2115,20 @@ msgid "Testing filament" msgstr "" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." msgstr "" #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2179,7 +2195,7 @@ msgid "UNLOAD MANUALLY" msgstr "" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector " "is free. Check FINDA connection." diff --git a/lang/po/Firmware_da.po b/lang/po/Firmware_da.po index 28b173235..1586d32a1 100644 --- a/lang/po/Firmware_da.po +++ b/lang/po/Firmware_da.po @@ -15,6 +15,13 @@ msgstr "" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -251,7 +258,7 @@ msgid "Calibration done" msgstr "" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" @@ -557,14 +564,14 @@ msgid "FINDA DIDNT TRIGGER" msgstr "" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." msgstr "" #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -698,21 +705,21 @@ msgid "Filament sensor" msgstr "" #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." @@ -929,7 +936,7 @@ msgid "" msgstr "" #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware. " "If the issue persists, contact support." @@ -1054,7 +1061,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "" @@ -1086,14 +1093,14 @@ msgid "MMU load fails" msgstr "" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." msgstr "" #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1166,7 +1173,16 @@ msgid "Model" msgstr "" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "" @@ -1627,7 +1643,7 @@ msgid "" msgstr "" #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" @@ -1668,7 +1684,7 @@ msgid "Rename" msgstr "" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2052,20 +2068,20 @@ msgid "Testing filament" msgstr "" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." msgstr "" #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2128,7 +2144,7 @@ msgid "UNLOAD MANUALLY" msgstr "" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector " "is free. Check FINDA connection." diff --git a/lang/po/Firmware_de.po b/lang/po/Firmware_de.po index 863c907cd..306b5357d 100644 --- a/lang/po/Firmware_de.po +++ b/lang/po/Firmware_de.po @@ -15,6 +15,13 @@ msgstr "" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -258,7 +265,7 @@ msgid "Calibration done" msgstr "Kalibrierung OK" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" "Die Aktion kann nicht ausgeführt werden, das Filament ist bereits geladen. " @@ -574,7 +581,7 @@ msgid "FINDA DIDNT TRIGGER" msgstr "FINDA N. AUSGELÖST" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." @@ -584,7 +591,7 @@ msgstr "" "FINDA funktioniert." #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -720,7 +727,7 @@ msgid "Filament sensor" msgstr "Filamentsensor" #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." @@ -729,7 +736,7 @@ msgstr "" "sicher, dass sich das Fil. bewegen kann und der Sensor funktioniert." #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." @@ -739,7 +746,7 @@ msgstr "" "funktioniert." #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." @@ -975,7 +982,7 @@ msgstr "" "den Knopf." #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware. " "If the issue persists, contact support." @@ -1103,7 +1110,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "MMU FW UPDATE NÖTIG" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "MMU Firmware interner Fehler, bitte setzen Sie die MMU zurück." @@ -1135,7 +1142,7 @@ msgid "MMU load fails" msgstr "MMU Ladefehler" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." @@ -1145,7 +1152,7 @@ msgstr "" "Support." #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1221,7 +1228,16 @@ msgid "Model" msgstr "Modell" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "Weiter Details online." @@ -1700,7 +1716,7 @@ msgstr "" "den Wert in den Einstellungen. Druck abgebrochen." #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" "Der Riemenscheiben- motor ist blockiert. Sicherstellen, dass sich die " @@ -1745,7 +1761,7 @@ msgid "Rename" msgstr "Umbenennen" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2141,7 +2157,7 @@ msgid "Testing filament" msgstr "Teste filament" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2149,7 +2165,7 @@ msgstr "" "ob irgendetwas seine Bewegung blockiert." #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." @@ -2159,7 +2175,7 @@ msgstr "" "neuesten Stand ist." #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2229,7 +2245,7 @@ msgid "UNLOAD MANUALLY" msgstr "ENTLADE MANUELL" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector " "is free. Check FINDA connection." diff --git a/lang/po/Firmware_es.po b/lang/po/Firmware_es.po index ed7b23e14..4d10330a2 100644 --- a/lang/po/Firmware_es.po +++ b/lang/po/Firmware_es.po @@ -15,6 +15,13 @@ msgstr "" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -257,7 +264,7 @@ msgid "Calibration done" msgstr "Calibracion OK" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" @@ -570,14 +577,14 @@ msgid "FINDA DIDNT TRIGGER" msgstr "" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." msgstr "" #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -711,21 +718,21 @@ msgid "Filament sensor" msgstr "Sensor de fil." #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." @@ -956,7 +963,7 @@ msgstr "" "Inserte el filamento (no lo cargue) en el extrusor y luego presione el dial." #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware. " "If the issue persists, contact support." @@ -1081,7 +1088,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "" @@ -1113,14 +1120,14 @@ msgid "MMU load fails" msgstr "Carga MMU falla" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." msgstr "" #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1193,7 +1200,16 @@ msgid "Model" msgstr "Modelo" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "" @@ -1676,7 +1692,7 @@ msgstr "" "ajustes. Impresion cancelada." #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" @@ -1719,7 +1735,7 @@ msgid "Rename" msgstr "Renombrar" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2118,20 +2134,20 @@ msgid "Testing filament" msgstr "" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." msgstr "" #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2199,7 +2215,7 @@ msgid "UNLOAD MANUALLY" msgstr "" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector " "is free. Check FINDA connection." diff --git a/lang/po/Firmware_fr.po b/lang/po/Firmware_fr.po index c34160437..4648fe355 100644 --- a/lang/po/Firmware_fr.po +++ b/lang/po/Firmware_fr.po @@ -15,6 +15,13 @@ msgstr "" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -258,7 +265,7 @@ msgid "Calibration done" msgstr "Calibration terminee" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" @@ -573,14 +580,14 @@ msgid "FINDA DIDNT TRIGGER" msgstr "" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." msgstr "" #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -714,21 +721,21 @@ msgid "Filament sensor" msgstr "Capteur de fil." #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." @@ -963,7 +970,7 @@ msgstr "" "appuyez sur le bouton." #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware. " "If the issue persists, contact support." @@ -1088,7 +1095,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "" @@ -1120,14 +1127,14 @@ msgid "MMU load fails" msgstr "Def. charg. MMU" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." msgstr "" #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1200,7 +1207,16 @@ msgid "Model" msgstr "Modele" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "" @@ -1680,7 +1696,7 @@ msgstr "" "Code. Merci de verifier le parametre dans les reglages. Impression annulee." #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" @@ -1722,7 +1738,7 @@ msgid "Rename" msgstr "Renommer" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2119,20 +2135,20 @@ msgid "Testing filament" msgstr "" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." msgstr "" #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2200,7 +2216,7 @@ msgid "UNLOAD MANUALLY" msgstr "" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector " "is free. Check FINDA connection." diff --git a/lang/po/Firmware_hr.po b/lang/po/Firmware_hr.po index ff714df52..bef511644 100644 --- a/lang/po/Firmware_hr.po +++ b/lang/po/Firmware_hr.po @@ -15,6 +15,13 @@ msgstr "" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -257,7 +264,7 @@ msgid "Calibration done" msgstr "Kalibracija gotova" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" @@ -568,14 +575,14 @@ msgid "FINDA DIDNT TRIGGER" msgstr "" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." msgstr "" #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -709,21 +716,21 @@ msgid "Filament sensor" msgstr "Senzor filamenta" #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." @@ -954,7 +961,7 @@ msgstr "" "Umetnite filament (nemojte ga puniti) u ekstruder i zatim pritisnite gumb." #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware. " "If the issue persists, contact support." @@ -1079,7 +1086,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "" @@ -1111,14 +1118,14 @@ msgid "MMU load fails" msgstr "Neusp. MMU punj" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." msgstr "" #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1191,7 +1198,16 @@ msgid "Model" msgstr "" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "" @@ -1665,7 +1681,7 @@ msgstr "" "vrijednost u postavkama. Print je otkazan." #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" @@ -1708,7 +1724,7 @@ msgid "Rename" msgstr "Preimenuj" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2106,20 +2122,20 @@ msgid "Testing filament" msgstr "" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." msgstr "" #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2186,7 +2202,7 @@ msgid "UNLOAD MANUALLY" msgstr "" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector " "is free. Check FINDA connection." diff --git a/lang/po/Firmware_hu.po b/lang/po/Firmware_hu.po index 9b2e1f25b..06a44924b 100644 --- a/lang/po/Firmware_hu.po +++ b/lang/po/Firmware_hu.po @@ -15,6 +15,13 @@ msgstr "" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -257,7 +264,7 @@ msgid "Calibration done" msgstr "Kalibracio kesz" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" @@ -571,14 +578,14 @@ msgid "FINDA DIDNT TRIGGER" msgstr "" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." msgstr "" #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -712,21 +719,21 @@ msgid "Filament sensor" msgstr "Filament szenzor" #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." @@ -958,7 +965,7 @@ msgstr "" "gombot." #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware. " "If the issue persists, contact support." @@ -1083,7 +1090,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "" @@ -1115,14 +1122,14 @@ msgid "MMU load fails" msgstr "MMU bet. hibak" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." msgstr "" #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1195,7 +1202,16 @@ msgid "Model" msgstr "Modell" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "" @@ -1672,7 +1688,7 @@ msgstr "" "beallitasokban. Nyomtatas megallitva." #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" @@ -1715,7 +1731,7 @@ msgid "Rename" msgstr "Atnevezes" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2110,20 +2126,20 @@ msgid "Testing filament" msgstr "" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." msgstr "" #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2191,7 +2207,7 @@ msgid "UNLOAD MANUALLY" msgstr "" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector " "is free. Check FINDA connection." diff --git a/lang/po/Firmware_it.po b/lang/po/Firmware_it.po index 793a8da9c..d8edd774a 100644 --- a/lang/po/Firmware_it.po +++ b/lang/po/Firmware_it.po @@ -15,6 +15,13 @@ msgstr "" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -257,7 +264,7 @@ msgid "Calibration done" msgstr "Calibr. completa" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" @@ -571,14 +578,14 @@ msgid "FINDA DIDNT TRIGGER" msgstr "" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." msgstr "" #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -712,21 +719,21 @@ msgid "Filament sensor" msgstr "Sensore filam." #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." @@ -957,7 +964,7 @@ msgstr "" "Inserire filamento (senza caricarlo) nell'estrusore e premere la manopola." #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware. " "If the issue persists, contact support." @@ -1082,7 +1089,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "" @@ -1114,14 +1121,14 @@ msgid "MMU load fails" msgstr "Car MMU falliti" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." msgstr "" #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1194,7 +1201,16 @@ msgid "Model" msgstr "Modello" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "" @@ -1670,7 +1686,7 @@ msgstr "" "Stampa annullata." #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" @@ -1713,7 +1729,7 @@ msgid "Rename" msgstr "Rinomina" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2110,20 +2126,20 @@ msgid "Testing filament" msgstr "" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." msgstr "" #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2191,7 +2207,7 @@ msgid "UNLOAD MANUALLY" msgstr "" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector " "is free. Check FINDA connection." diff --git a/lang/po/Firmware_lb.po b/lang/po/Firmware_lb.po index 8fa9eb20e..0aa1123ac 100644 --- a/lang/po/Firmware_lb.po +++ b/lang/po/Firmware_lb.po @@ -15,6 +15,13 @@ msgstr "" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -251,7 +258,7 @@ msgid "Calibration done" msgstr "" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" @@ -557,14 +564,14 @@ msgid "FINDA DIDNT TRIGGER" msgstr "" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." msgstr "" #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -698,21 +705,21 @@ msgid "Filament sensor" msgstr "" #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." @@ -929,7 +936,7 @@ msgid "" msgstr "" #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware. " "If the issue persists, contact support." @@ -1054,7 +1061,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "" @@ -1086,14 +1093,14 @@ msgid "MMU load fails" msgstr "" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." msgstr "" #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1166,7 +1173,16 @@ msgid "Model" msgstr "" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "" @@ -1627,7 +1643,7 @@ msgid "" msgstr "" #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" @@ -1668,7 +1684,7 @@ msgid "Rename" msgstr "" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2052,20 +2068,20 @@ msgid "Testing filament" msgstr "" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." msgstr "" #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2128,7 +2144,7 @@ msgid "UNLOAD MANUALLY" msgstr "" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector " "is free. Check FINDA connection." diff --git a/lang/po/Firmware_lt.po b/lang/po/Firmware_lt.po index 476eaac42..6e62226b9 100644 --- a/lang/po/Firmware_lt.po +++ b/lang/po/Firmware_lt.po @@ -15,6 +15,13 @@ msgstr "" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -251,7 +258,7 @@ msgid "Calibration done" msgstr "" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" @@ -557,14 +564,14 @@ msgid "FINDA DIDNT TRIGGER" msgstr "" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." msgstr "" #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -698,21 +705,21 @@ msgid "Filament sensor" msgstr "" #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." @@ -929,7 +936,7 @@ msgid "" msgstr "" #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware. " "If the issue persists, contact support." @@ -1054,7 +1061,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "" @@ -1086,14 +1093,14 @@ msgid "MMU load fails" msgstr "" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." msgstr "" #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1166,7 +1173,16 @@ msgid "Model" msgstr "" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "" @@ -1627,7 +1643,7 @@ msgid "" msgstr "" #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" @@ -1668,7 +1684,7 @@ msgid "Rename" msgstr "" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2052,20 +2068,20 @@ msgid "Testing filament" msgstr "" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." msgstr "" #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2128,7 +2144,7 @@ msgid "UNLOAD MANUALLY" msgstr "" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector " "is free. Check FINDA connection." diff --git a/lang/po/Firmware_nl.po b/lang/po/Firmware_nl.po index 58935c1b7..fca44de2f 100644 --- a/lang/po/Firmware_nl.po +++ b/lang/po/Firmware_nl.po @@ -15,6 +15,13 @@ msgstr "" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -258,10 +265,11 @@ msgid "Calibration done" msgstr "Kalibratie klaar" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" -"De actie kan niet worden uitgevoerd, de filament is al geladen. Eerst uitladen." +"De actie kan niet worden uitgevoerd, de filament is al geladen. Eerst " +"uitladen." #. MSG_SD_REMOVED c=20 #: ../../Firmware/ultralcd.cpp:7700 @@ -573,16 +581,16 @@ msgid "FINDA DIDNT TRIGGER" msgstr "" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." msgstr "" -"De FINDA schakelde niet uit bij het lossen. Probeer Fil. handmatig " -"te ontladen. Controleer of Fil. kan bewegen en of de FINDA werkt." +"De FINDA schakelde niet uit bij het lossen. Probeer Fil. handmatig te " +"ontladen. Controleer of Fil. kan bewegen en of de FINDA werkt." #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -718,7 +726,7 @@ msgid "Filament sensor" msgstr "Filamentsensor" #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." @@ -727,7 +735,7 @@ msgstr "" "Controleer of het filament kan bewegen en de sensor werkt." #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." @@ -736,13 +744,13 @@ msgstr "" "Controleer of het filament de fsensor heeft bereikt en de sensor werkt." #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." msgstr "" -"Filament sensor te vroeg geactiveerd tijdens laden naar extruder. Controleer of " -"er niets vastzit in de PTFE-buis. Controleer of de sensor goed leest." +"Filament sensor te vroeg geactiveerd tijdens laden naar extruder. Controleer " +"of er niets vastzit in de PTFE-buis. Controleer of de sensor goed leest." #. MSG_FILAMENT_USED c=19 #: ../../Firmware/ultralcd.cpp:2363 @@ -969,13 +977,13 @@ msgstr "" "Steek a.u.b. filament (maar niet laden) in de extruder en druk op knop." #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware. " "If the issue persists, contact support." msgstr "" -"Interne runtime fout. Probeer de MMU-eenheid te resetten of de firmware bij te " -"werken. Als het probleem aanhoudt, neem dan contact op met support." +"Interne runtime fout. Probeer de MMU-eenheid te resetten of de firmware bij " +"te werken. Als het probleem aanhoudt, neem dan contact op met support." #. MSG_FILAMENT_LOADED c=20 r=2 #: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827 @@ -1096,7 +1104,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "" @@ -1128,7 +1136,7 @@ msgid "MMU load fails" msgstr "MMU laadfout" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." @@ -1137,7 +1145,7 @@ msgstr "" "Als het probleem aanhoudt, neem dan contact op met support." #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1212,7 +1220,16 @@ msgid "Model" msgstr "Model" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "" @@ -1690,7 +1707,7 @@ msgstr "" "de waarde in de instellingen. Afdrukken geannuleerd." #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" @@ -1732,7 +1749,7 @@ msgid "Rename" msgstr "Hernoem" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2132,20 +2149,20 @@ msgid "Testing filament" msgstr "" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." msgstr "" #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2213,7 +2230,7 @@ msgid "UNLOAD MANUALLY" msgstr "" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector " "is free. Check FINDA connection." diff --git a/lang/po/Firmware_no.po b/lang/po/Firmware_no.po index 9da4fdae1..5de96085e 100644 --- a/lang/po/Firmware_no.po +++ b/lang/po/Firmware_no.po @@ -15,6 +15,13 @@ msgstr "" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -258,7 +265,7 @@ msgid "Calibration done" msgstr "Kalibrering ferdig" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" @@ -571,14 +578,14 @@ msgid "FINDA DIDNT TRIGGER" msgstr "" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." msgstr "" #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -712,21 +719,21 @@ msgid "Filament sensor" msgstr "Filamentsensor" #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." @@ -951,7 +958,7 @@ msgid "" msgstr "Sett inn filamentet i ekstruderen og deretter trykk inn valghjulet." #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware. " "If the issue persists, contact support." @@ -1076,7 +1083,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "" @@ -1108,14 +1115,14 @@ msgid "MMU load fails" msgstr "MMU lastefeil" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." msgstr "" #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1188,7 +1195,16 @@ msgid "Model" msgstr "Modell" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "" @@ -1660,7 +1676,7 @@ msgstr "" "hva som er satt. Print avbrutt." #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" @@ -1701,7 +1717,7 @@ msgid "Rename" msgstr "Gi nytt navn" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2092,20 +2108,20 @@ msgid "Testing filament" msgstr "" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." msgstr "" #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2173,7 +2189,7 @@ msgid "UNLOAD MANUALLY" msgstr "" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector " "is free. Check FINDA connection." diff --git a/lang/po/Firmware_pl.po b/lang/po/Firmware_pl.po index ecfb693e3..14ce91adb 100644 --- a/lang/po/Firmware_pl.po +++ b/lang/po/Firmware_pl.po @@ -15,6 +15,13 @@ msgstr "" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -257,7 +264,7 @@ msgid "Calibration done" msgstr "Kalibracja OK" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" @@ -571,14 +578,14 @@ msgid "FINDA DIDNT TRIGGER" msgstr "" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." msgstr "" #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -712,21 +719,21 @@ msgid "Filament sensor" msgstr "Czujnik filamentu" #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." @@ -955,7 +962,7 @@ msgstr "" "pokretlo." #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware. " "If the issue persists, contact support." @@ -1080,7 +1087,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "" @@ -1112,14 +1119,14 @@ msgid "MMU load fails" msgstr "Bledy lad. MMU" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." msgstr "" #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1192,7 +1199,16 @@ msgid "Model" msgstr "" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "" @@ -1667,7 +1683,7 @@ msgstr "" "Srednica dyszy rozni sie od tej w G-code. Sprawdz ustawienia. Druk anulowany." #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" @@ -1708,7 +1724,7 @@ msgid "Rename" msgstr "Zmien nazwe" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2105,20 +2121,20 @@ msgid "Testing filament" msgstr "" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." msgstr "" #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2186,7 +2202,7 @@ msgid "UNLOAD MANUALLY" msgstr "" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector " "is free. Check FINDA connection." diff --git a/lang/po/Firmware_ro.po b/lang/po/Firmware_ro.po index 7e81ce6a6..9f314244e 100644 --- a/lang/po/Firmware_ro.po +++ b/lang/po/Firmware_ro.po @@ -15,6 +15,13 @@ msgstr "" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -259,7 +266,7 @@ msgid "Calibration done" msgstr "Calibrare gata" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" @@ -572,14 +579,14 @@ msgid "FINDA DIDNT TRIGGER" msgstr "" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." msgstr "" #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -713,21 +720,21 @@ msgid "Filament sensor" msgstr "Senz. de filament" #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." @@ -956,7 +963,7 @@ msgid "" msgstr "Infige filamentul (nu-l incarca) in extruder si apasa butonul." #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware. " "If the issue persists, contact support." @@ -1081,7 +1088,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "" @@ -1113,14 +1120,14 @@ msgid "MMU load fails" msgstr "Err. incarc MMU" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." msgstr "" #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1193,7 +1200,16 @@ msgid "Model" msgstr "" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "" @@ -1668,7 +1684,7 @@ msgstr "" "valoarea in setari. Print anulat." #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" @@ -1710,7 +1726,7 @@ msgid "Rename" msgstr "Redenumeste" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2107,20 +2123,20 @@ msgid "Testing filament" msgstr "" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." msgstr "" #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2187,7 +2203,7 @@ msgid "UNLOAD MANUALLY" msgstr "" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector " "is free. Check FINDA connection." diff --git a/lang/po/Firmware_sk.po b/lang/po/Firmware_sk.po index b9f6c4f75..829d63029 100644 --- a/lang/po/Firmware_sk.po +++ b/lang/po/Firmware_sk.po @@ -15,6 +15,13 @@ msgstr "" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -257,7 +264,7 @@ msgid "Calibration done" msgstr "Kalibracia OK" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" @@ -570,14 +577,14 @@ msgid "FINDA DIDNT TRIGGER" msgstr "" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." msgstr "" #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -711,21 +718,21 @@ msgid "Filament sensor" msgstr "Senzor filamentu" #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." @@ -953,7 +960,7 @@ msgid "" msgstr "Vlozte filament (nezavadzajte) do extruderu a stlacte tlacidlo" #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware. " "If the issue persists, contact support." @@ -1078,7 +1085,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "" @@ -1110,14 +1117,14 @@ msgid "MMU load fails" msgstr "MMU zlyhalo" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." msgstr "" #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1190,7 +1197,16 @@ msgid "Model" msgstr "" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "" @@ -1666,7 +1682,7 @@ msgstr "" "Tlac zrusena." #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" @@ -1707,7 +1723,7 @@ msgid "Rename" msgstr "Premenovat" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2099,20 +2115,20 @@ msgid "Testing filament" msgstr "" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." msgstr "" #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2179,7 +2195,7 @@ msgid "UNLOAD MANUALLY" msgstr "" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector " "is free. Check FINDA connection." diff --git a/lang/po/Firmware_sl.po b/lang/po/Firmware_sl.po index 46b1a7140..5aec8e0b7 100644 --- a/lang/po/Firmware_sl.po +++ b/lang/po/Firmware_sl.po @@ -15,6 +15,13 @@ msgstr "" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -251,7 +258,7 @@ msgid "Calibration done" msgstr "" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" @@ -557,14 +564,14 @@ msgid "FINDA DIDNT TRIGGER" msgstr "" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." msgstr "" #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -698,21 +705,21 @@ msgid "Filament sensor" msgstr "" #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." @@ -929,7 +936,7 @@ msgid "" msgstr "" #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware. " "If the issue persists, contact support." @@ -1054,7 +1061,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "" @@ -1086,14 +1093,14 @@ msgid "MMU load fails" msgstr "" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." msgstr "" #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1166,7 +1173,16 @@ msgid "Model" msgstr "" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "" @@ -1627,7 +1643,7 @@ msgid "" msgstr "" #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" @@ -1668,7 +1684,7 @@ msgid "Rename" msgstr "" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2052,20 +2068,20 @@ msgid "Testing filament" msgstr "" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." msgstr "" #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2128,7 +2144,7 @@ msgid "UNLOAD MANUALLY" msgstr "" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector " "is free. Check FINDA connection." diff --git a/lang/po/Firmware_sv.po b/lang/po/Firmware_sv.po index 761418ed1..a7e746635 100644 --- a/lang/po/Firmware_sv.po +++ b/lang/po/Firmware_sv.po @@ -15,6 +15,13 @@ msgstr "" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +#. MSG_DESC_CANNOT_MOVE c=20 +#. these errors have been disabled +#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243 +#: ../../Firmware/mmu2/errors_list.h:245 +msgid " " +msgstr "" + #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/Filament_sensor.cpp:287 #: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165 @@ -258,7 +265,7 @@ msgid "Calibration done" msgstr "Kalibraring utförd" #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:228 +#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266 msgid "Cannot perform the action, filament is already loaded. Unload it first." msgstr "" @@ -571,14 +578,14 @@ msgid "FINDA DIDNT TRIGGER" msgstr "" #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:197 +#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237 msgid "" "FINDA didn't switch off while unloading filament. Try unloading manually. " "Ensure filament can move and FINDA works." msgstr "" #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:196 +#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236 msgid "" "FINDA didn't trigger while loading the filament. Ensure the filament can " "move and FINDA works." @@ -712,21 +719,21 @@ msgid "Filament sensor" msgstr "" #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:199 +#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239 msgid "" "Filament sensor didn't switch off while unloading filament. Ensure filament " "can move and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:198 +#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238 msgid "" "Filament sensor didn't trigger while loading the filament. Ensure the " "filament reached the fsensor and the sensor works." msgstr "" #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:201 +#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241 msgid "" "Filament sensor triggered too early while loading to extruder. Check there " "isn't anything stuck in PTFE tube. Check that sensor reads properly." @@ -958,7 +965,7 @@ msgstr "" "Infoga filamentet (ladda inte in det) i extrudern och tryck sedan på knappen." #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11 -#: ../../Firmware/mmu2/errors_list.h:232 +#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270 msgid "" "Internal runtime error. Try resetting the MMU unit or updating the firmware. " "If the issue persists, contact support." @@ -1083,7 +1090,7 @@ msgid "MMU FW UPDATE NEEDED" msgstr "" #. MSG_DESC_QUEUE_FULL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:230 +#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268 msgid "MMU Firmware internal error, please reset the MMU." msgstr "" @@ -1115,14 +1122,14 @@ msgid "MMU load fails" msgstr "MMU-laddn felar" #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:227 +#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265 msgid "" "MMU unit not responding correctly. Check the wiring and connectors. If the " "issue persists, contact support." msgstr "" #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:226 +#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264 msgid "" "MMU unit not responding. Check the wiring and connectors. If the issue " "persists, contact support." @@ -1195,7 +1202,16 @@ msgid "Model" msgstr "Modell" #. MSG_DESC_TMC c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:207 +#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246 +#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248 +#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250 +#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252 +#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254 +#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256 +#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258 +#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260 +#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262 +#: ../../Firmware/mmu2/errors_list.h:263 msgid "More details online." msgstr "" @@ -1673,7 +1689,7 @@ msgstr "" "inställningarna. Utskriften avbröts." #. MSG_DESC_PULLEY_STALLED c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:200 +#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring." msgstr "" @@ -1716,7 +1732,7 @@ msgid "Rename" msgstr "Döp om" #. MSG_DESC_INVALID_TOOL c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:229 +#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267 msgid "" "Requested filament tool is not available on this hardware. Check the G-code " "for tool index out of range (T0-T4)." @@ -2110,20 +2126,20 @@ msgid "Testing filament" msgstr "" #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:205 +#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244 msgid "" "The Idler cannot home properly. Check for anything blocking its movement." msgstr "" #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9 -#: ../../Firmware/mmu2/errors_list.h:231 +#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269 msgid "" "The MMU unit reports its FW version incompatible with the printer's " "firmware. Make sure the MMU firmware is up to date." msgstr "" #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:202 +#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242 msgid "" "The Selector cannot home properly. Check for anything blocking its movement." msgstr "" @@ -2190,7 +2206,7 @@ msgid "UNLOAD MANUALLY" msgstr "" #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8 -#: ../../Firmware/mmu2/errors_list.h:233 +#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271 msgid "" "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector " "is free. Check FINDA connection."