josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add M420 

Same as G81
This commit is contained in:
3d-gussner 2023-09-18 15:45:13 +02:00
parent 0f1cb4f407
commit 0877585bd1
1 changed files with 26 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
Firmware/Marlin_main.cpp
View File

@ -3085,6 +3085,16 @@ static void gcode_G80()
mesh_bed_leveling_flag = false;
}
// G80_M420 Mesh bed leveling status
static void gcode_G81_M420()
{
if (mbl.active) {
mbl.print();
} else SERIAL_PROTOCOLLNPGM("Mesh bed leveling not active.");
return;
}
//! @brief Calibrate XYZ
//! @param onlyZ if true, calibrate only Z axis
//! @param verbosity_level
@ -3785,7 +3795,7 @@ extern uint8_t st_backlash_y;
//!@n G31 - Dock sled (Z_PROBE_SLED only)
//!@n G32 - Undock sled (Z_PROBE_SLED only)
//!@n G80 - Automatic mesh bed leveling
//!@n G81 - Print bed profile
//!@n G81 - Mesh bed leveling status
//!@n G90 - Use Absolute Coordinates
//!@n G91 - Use Relative Coordinates
//!@n G92 - Set current position to coordinates given
@ -3875,6 +3885,7 @@ extern uint8_t st_backlash_y;
//!@n M404 - N<dia in mm> Enter the nominal filament width (3mm, 1.75mm ) or will display nominal filament width without parameters
//!@n M405 - Turn on Filament Sensor extrusion control. Optional D<delay in cm> to set delay in centimeters between sensor and extruder
//!@n M406 - Turn off Filament Sensor extrusion control
//!@n M420 - Mesh bed leveling status
//!@n M500 - stores parameters in EEPROM
//!@n M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
//!@n M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
@ -4912,14 +4923,10 @@ void process_commands()
### G81 - Mesh bed leveling status <a href="https://reprap.org/wiki/G-code#G81:_Mesh_bed_leveling_status">G81: Mesh bed leveling status</a>
Prints mesh bed leveling status and bed profile if activated.
*/
case 81:
if (mbl.active) {
mbl.print();
}
else
SERIAL_PROTOCOLLNPGM("Mesh bed leveling not active.");
break;
case 81: {
gcode_G81_M420();
}
break;
#if 0
/*!
### G82: Single Z probe at current location - Not active <a href="https://reprap.org/wiki/G-code#G82:_Single_Z_probe_at_current_location">G82: Single Z probe at current location</a>
@ -7395,6 +7402,16 @@ Sigma_Exit:
break;
#endif
/*!
### M420 - Mesh bed leveling status <a href="https://reprap.org/wiki/G-code#M420:_Mesh_bed_leveling_status">M420: Mesh bed leveling status</a>
Prints mesh bed leveling status and bed profile if activated.
*/
case 420: // M420 Mesh bed leveling status
{
gcode_G81_M420();
}
break;
/*!
### M500 - Store settings in EEPROM <a href="https://reprap.org/wiki/G-code#M500:_Store_parameters_in_non-volatile_storage">M500: Store parameters in non-volatile storage</a>
Save current parameters to EEPROM.