Update and fix translations

Firmware/Configuration.h

@@ -15,7 +15,7 @@ extern const char _sPrinterMmuName[] PROGMEM;
 // Firmware version
 #define FW_MAJOR 3
 #define FW_MINOR 13
-#define FW_REVISION 0
+#define FW_REVISION 1
 #define FW_FLAVOR RC      //uncomment if DEBUG, DEVEL, ALPHA, BETA or RC
 #define FW_FLAVERSION 1     //uncomment if FW_FLAVOR is defined and versioning is needed. Limited to max 8.
 #ifndef FW_FLAVOR
@@ -24,7 +24,7 @@ extern const char _sPrinterMmuName[] PROGMEM;
     #define FW_VERSION STR(FW_MAJOR) "." STR(FW_MINOR) "." STR(FW_REVISION) "-" STR(FW_FLAVOR) "" STR(FW_FLAVERSION)
 #endif
 
-#define FW_COMMIT_NR 6853
+#define FW_COMMIT_NR 7052
 
 // FW_VERSION_UNKNOWN means this is an unofficial build.
 // The firmware should only be checked into github with this symbol.

Firmware/messages.cpp

@@ -103,6 +103,7 @@ const char MSG_TOTAL[] PROGMEM_I1 = ISTR("Total"); ////MSG_TOTAL c=6
 const char MSG_MATERIAL_CHANGES[] PROGMEM_I1 = ISTR("Material changes"); ////MSG_MATERIAL_CHANGES c=18
 const char MSG_TOTAL_FAILURES[] PROGMEM_I1 = ISTR("Total failures"); ////MSG_TOTAL_FAILURES c=20
 const char MSG_HW_SETUP[] PROGMEM_I1 = ISTR("HW Setup"); ////MSG_HW_SETUP c=18
+const char MSG_TUNE[] PROGMEM_I1 =ISTR("Tune"); ////MSG_TUNE c=8
 const char MSG_MODE[] PROGMEM_I1 = ISTR("Mode"); ////MSG_MODE c=6
 const char MSG_HIGH_POWER[] PROGMEM_I1 = ISTR("High power"); ////MSG_HIGH_POWER c=10
 const char MSG_AUTO_POWER[] PROGMEM_I1 = ISTR("Auto power"); ////MSG_AUTO_POWER c=10

Firmware/messages.h

@@ -108,6 +108,7 @@ extern const char MSG_TOTAL[];
 extern const char MSG_MATERIAL_CHANGES[];
 extern const char MSG_TOTAL_FAILURES[];
 extern const char MSG_HW_SETUP[];
+extern const char MSG_TUNE[];
 extern const char MSG_MODE[];
 extern const char MSG_HIGH_POWER[];
 extern const char MSG_AUTO_POWER[];

Firmware/mmu2/errors_list.h

@@ -350,7 +350,7 @@ static const char * const errorDescs[] PROGMEM = {
 // Beware - we only have space for 2 buttons on the LCD while the MMU has 3 buttons
 // -> the left button on the MMU is not used/rendered on the LCD (it is also almost unused on the MMU side)
 static const char MSG_BTN_RETRY[] PROGMEM_I1 = ISTR("Retry"); ////MSG_BTN_RETRY c=8
-static const char MSG_BTN_CONTINUE[] PROGMEM_I1 = ISTR("Done"); ////MSG_BTN_CONTINUE c=8
+static const char MSG_BTN_DONE[] PROGMEM_I1 = ISTR("Done"); ////MSG_BTN_DONE c=8
 static const char MSG_BTN_RESET_MMU[] PROGMEM_I1 = ISTR("ResetMMU"); ////MSG_BTN_RESET_MMU c=8
 static const char MSG_BTN_UNLOAD[] PROGMEM_I1 = ISTR("Unload"); ////MSG_BTN_UNLOAD c=8
 static const char MSG_BTN_LOAD[] PROGMEM_I1 = ISTR("Load"); ////MSG_BTN_LOAD c=8
@@ -363,7 +363,7 @@ static const char MSG_BTN_MORE[] PROGMEM_N1 = "\x06";
 // Used to parse the buttons from Btns().
 static const char * const btnOperation[] PROGMEM = {
     _R(MSG_BTN_RETRY),
-    _R(MSG_BTN_CONTINUE),
+    _R(MSG_BTN_DONE),
     _R(MSG_BTN_RESET_MMU),
     _R(MSG_BTN_UNLOAD),
     _R(MSG_BTN_LOAD),

Firmware/mmu2_reporting.cpp

@@ -421,9 +421,9 @@ void tuneIdlerStallguardThresholdMenu() {
         lcd_return_to_status();
         return;
     );
-    MENU_ITEM_BACK_P(_i("Done"));
+    MENU_ITEM_BACK_P(_i("Done")); //@Todo same as MSG_BTN_DONE c=8
     MENU_ITEM_EDIT_int3_P(
-        _i("Sensitivity"),
+        _i("Sensitivity"), ////MSG_MMU_SENSITIVITY c=18
         &_md->currentValue,
         _md->item.minValue,
         _md->item.maxValue

Firmware/ultralcd.cpp

@@ -5206,7 +5206,7 @@ static void lcd_main_menu()
         MENU_ITEM_FUNCTION_P(_T(MSG_FILAMENTCHANGE), lcd_colorprint_change);//8
 
     if ( moves_planned() || printer_active() ) {
-        MENU_ITEM_SUBMENU_P(_i("Tune"), lcd_tune_menu);////MSG_TUNE c=18
+        MENU_ITEM_SUBMENU_P(_T(MSG_TUNE), lcd_tune_menu);
     } else if (!Stopped) {
         MENU_ITEM_SUBMENU_P(_i("Preheat"), lcd_preheat_menu);////MSG_PREHEAT c=18
     }