josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

MMU: Improve unload handling when print is aborted 

- Don't allow re-heating the nozzle or the MMU to unload the filament if the print was aborted by a temperature error
- Allow MMU to unload filament if there is no temperature error, and there is no fan error when Fan check is enabled
- When Fan check is disabled, the MMU may unload if there is no temperature error

Change in memory:
Flash: +14 bytes
SRAM: 0 bytes

PFW-1557
This commit is contained in:
gudnimg 2024-04-14 12:07:56 +00:00
parent 52ac95f082
commit 16dfcfeb9a
1 changed files with 18 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

33
Firmware/ultralcd.cpp
View File

@ -5716,23 +5716,26 @@ void lcd_print_stop_finish()
// restore the auto hotend state
hotendDefaultAutoFanState();
}
if (MMU2::mmu2.Enabled() && MMU2::mmu2.FindaDetectsFilament())
{
// The print was aborted while when the nozzle was cold:
// 1. in a paused state => a partial backup in RAM is always available
// 2. after a recoverable thermal/fan error had paused the print => only extruder temperature is saved to RAM
if (printingIsPaused())
{
// Restore temperature saved in ram after pausing print
restore_extruder_temperature_from_ram();
}
if (MMU2::mmu2.Enabled() && MMU2::mmu2.FindaDetectsFilament()
#ifdef FANCHECK
&& fan_check_error != EFCE_REPORTED
#endif //FANCHECK
) {
// The print was aborted while when the nozzle was cold:
// 1. in a paused state => a partial backup in RAM is always available
// 2. after a recoverable thermal/fan error had paused the print => only extruder temperature is saved to RAM
if (printingIsPaused())
{
// Restore temperature saved in ram after pausing print
restore_extruder_temperature_from_ram();
}
// If the pause state was cleared previously or the target temperature is 0°C in the case
// of an unconditional stop. In that scenario we do not want to unload.
if (target_temperature[0] >= extrude_min_temp) {
MMU2::mmu2.unload(); // M702
// If the pause state was cleared previously or the target temperature is 0°C in the case
// of an unconditional stop. In that scenario we do not want to unload.
if (target_temperature[0] >= extrude_min_temp) {
MMU2::mmu2.unload(); // M702
}
}
}