Merge pull request #2423 from Panayiotis-git/MK3_M600_Issue-2415

LCD option to unload new filament on M600 (issue #2415)

Firmware/Marlin.h

@@ -446,7 +446,7 @@ void gcode_M701(float fastLoadLength, uint8_t mmuSlotIndex);
 void M600_load_filament();
 void M600_load_filament_movements();
 void M600_wait_for_user();
-void M600_check_state();
+bool M600_check_state_and_repeat();
 void load_filament_final_feed();
 void marlin_wait_for_click();
 float raise_z(float delta);

Firmware/Marlin_main.cpp

@@ -3427,17 +3427,19 @@ static void gcode_M600(const bool automatic, const float x_position, const float
     plan_buffer_line_curposXYZE(FILAMENTCHANGE_XYFEED);
     st_synchronize();
 
-    // Unload filament
+    bool repeat = false;
-    if (MMU2::mmu2.Enabled()) {
+    do {
-        eject_slot = MMU2::mmu2.get_current_tool();
+        // Unload filament
-        mmu_M600_unload_filament();
+        if (MMU2::mmu2.Enabled()) {
-    } else {
+            eject_slot = MMU2::mmu2.get_current_tool();
-        // Beep, manage nozzle heater and wait for user to start unload filament
+            mmu_M600_unload_filament();
-        M600_wait_for_user();
+        } else {
-        unload_filament(e_shift_late);
+            // Beep, manage nozzle heater and wait for user to start unload filament
-    }
+            M600_wait_for_user();
-    st_synchronize();          // finish moves
+            unload_filament(e_shift_late);
-    {
+        }
+        st_synchronize();          // finish moves
+
         FSensorBlockRunout fsBlockRunout;
         
         if (!MMU2::mmu2.Enabled())
@@ -3445,10 +3447,11 @@ static void gcode_M600(const bool automatic, const float x_position, const float
             KEEPALIVE_STATE(PAUSED_FOR_USER);
             uint8_t choice =
                 lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Was filament unload successful?"), false, LCD_LEFT_BUTTON_CHOICE); ////MSG_UNLOAD_SUCCESSFUL c=20 r=3
+            lcd_update_enable(false);
             if (choice == LCD_MIDDLE_BUTTON_CHOICE) {
                 lcd_clear();
                 lcd_puts_at_P(0, 2, _T(MSG_PLEASE_WAIT));
-                current_position[X_AXIS] -= 100;
+                current_position[X_AXIS] = 100;
                 plan_buffer_line_curposXYZE(FILAMENTCHANGE_XYFEED);
                 st_synchronize();
                 lcd_show_fullscreen_message_and_wait_P(_i("Please open idler and remove filament manually.")); ////MSG_CHECK_IDLER c=20 r=4
@@ -3461,51 +3464,53 @@ static void gcode_M600(const bool automatic, const float x_position, const float
             mmu_M600_load_filament(automatic);
         }
         if (!automatic)
-            M600_check_state();
+            repeat = M600_check_state_and_repeat();
-    
-        lcd_update_enable(true);
-    
-        // Not let's go back to print
-        fanSpeed = saved_fan_speed;
-    
-        // Feed a little of filament to stabilize pressure
-        if (!automatic) {
-            if (print_job_timer.isPaused())
-            {
-                // Return to retracted state during a pause
-                // @todo is retraction really needed? E-position is reverted a few lines below
-                current_position[E_AXIS] -= default_retraction;
-                plan_buffer_line_curposXYZE(FILAMENTCHANGE_RFEED);
-
-                // Cooldown the extruder again
-                setTargetHotend(0);
-            }
-            else
-            {
-                // Feed a little of filament to stabilize pressure
-                current_position[E_AXIS] += FILAMENTCHANGE_RECFEED;
-                plan_buffer_line_curposXYZE(FILAMENTCHANGE_EXFEED);
-            }
-        }
-
-        // Move XY back
-        plan_buffer_line(saved_pos[X_AXIS], saved_pos[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], FILAMENTCHANGE_XYFEED);
-        st_synchronize();
-
-        // Move Z back
-        plan_buffer_line(saved_pos[X_AXIS], saved_pos[Y_AXIS], saved_pos[Z_AXIS], current_position[E_AXIS], FILAMENTCHANGE_ZFEED);
-        st_synchronize();
-
-        // Set E position to original
-        plan_set_e_position(saved_pos[E_AXIS]);
-    
-        memcpy(current_position, saved_pos, sizeof(saved_pos));
-        set_destination_to_current();
-    
-        // Recover feed rate
-        feedmultiply = saved_feedmultiply2;
-        enquecommandf_P(MSG_M220, saved_feedmultiply2);
     }
+    while (repeat);
+
+    lcd_update_enable(true);
+    
+    // Not let's go back to print
+    fanSpeed = saved_fan_speed;
+    
+    // Feed a little of filament to stabilize pressure
+    if (!automatic) {
+        if (print_job_timer.isPaused())
+        {
+            // Return to retracted state during a pause
+            // @todo is retraction really needed? E-position is reverted a few lines below
+            current_position[E_AXIS] -= default_retraction;
+            plan_buffer_line_curposXYZE(FILAMENTCHANGE_RFEED);
+
+            // Cooldown the extruder again
+            setTargetHotend(0);
+        }
+        else
+        {
+            // Feed a little of filament to stabilize pressure
+            current_position[E_AXIS] += FILAMENTCHANGE_RECFEED;
+            plan_buffer_line_curposXYZE(FILAMENTCHANGE_EXFEED);
+        }
+    }
+
+    // Move XY back
+    plan_buffer_line(saved_pos[X_AXIS], saved_pos[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], FILAMENTCHANGE_XYFEED);
+    st_synchronize();
+
+    // Move Z back
+    plan_buffer_line(saved_pos[X_AXIS], saved_pos[Y_AXIS], saved_pos[Z_AXIS], current_position[E_AXIS], FILAMENTCHANGE_ZFEED);
+    st_synchronize();
+
+    // Set E position to original
+    plan_set_e_position(saved_pos[E_AXIS]);
+    
+    memcpy(current_position, saved_pos, sizeof(saved_pos));
+    set_destination_to_current();
+    
+    // Recover feed rate
+    feedmultiply = saved_feedmultiply2;
+    enquecommandf_P(MSG_M220, saved_feedmultiply2);
+
     if (print_job_timer.isPaused()) lcd_setstatuspgm(_T(MSG_PRINT_PAUSED));
     else lcd_setstatuspgm(MSG_WELCOME);
     custom_message_type = CustomMsg::Status;
@@ -10991,10 +10996,10 @@ void load_filament_final_feed()
 }
 
 //! @brief Wait for user to check the state
-void M600_check_state()
+bool M600_check_state_and_repeat()
 {
-    uint8_t lcd_change_filament_state = 0;
+    uint8_t lcd_change_filament_state = 10;
-    while (lcd_change_filament_state != 1)
+    while (lcd_change_filament_state != 0 && lcd_change_filament_state != 3)
     {
         KEEPALIVE_STATE(PAUSED_FOR_USER);
         lcd_change_filament_state = lcd_alright();
@@ -11002,7 +11007,7 @@ void M600_check_state()
         switch(lcd_change_filament_state)
         {
         // Filament failed to load so load it again
-        case 2:
+        case 1:
             if (MMU2::mmu2.Enabled()) {
                 uint8_t eject_slot = MMU2::mmu2.get_current_tool();
 
@@ -11020,19 +11025,24 @@ void M600_check_state()
             break;
 
         // Filament loaded properly but color is not clear
-        case 3:
+        case 2:
             st_synchronize();
             load_filament_final_feed();
             lcd_loading_color();
             st_synchronize();
             break;
 
+        // Unload filament
+        case 3:
+           return true;
+
         // Everything good
         default:
             lcd_change_success();
             break;
         }
     }
+    return false;
 }
 
 //! @brief Wait for user action
@@ -11120,8 +11130,6 @@ void M600_load_filament() {
 	M600_load_filament_movements();
 
 	Sound_MakeCustom(50,1000,false);
-
-	lcd_update_enable(false);
 }
 
 

Firmware/messages.cpp

@@ -122,7 +122,7 @@ const char MSG_STOP_PRINT[] PROGMEM_I1 = ISTR("Stop print"); ////MSG_STOP_PRINT
 const char MSG_STOPPED[] PROGMEM_I1 = ISTR("STOPPED."); ////MSG_STOPPED c=20
 const char MSG_PINDA_CALIBRATION[] PROGMEM_I1 = ISTR("PINDA cal."); ////MSG_PINDA_CALIBRATION c=13
 const char MSG_PINDA_CALIBRATION_DONE[] PROGMEM_I1 = ISTR("PINDA calibration is finished and active. It can be disabled in menu Settings->PINDA cal."); ////MSG_PINDA_CALIBRATION_DONE c=20 r=8
-const char MSG_UNLOAD_FILAMENT[] PROGMEM_I1 = ISTR("Unload filament"); ////MSG_UNLOAD_FILAMENT c=16
+const char MSG_UNLOAD_FILAMENT[] PROGMEM_I1 = ISTR("Unload filament"); ////MSG_UNLOAD_FILAMENT c=18
 const char MSG_UNLOADING_FILAMENT[] PROGMEM_I1 = ISTR("Unloading filament"); ////MSG_UNLOADING_FILAMENT c=20
 const char MSG_INFO_SCREEN[] PROGMEM_I1 = ISTR("Info screen"); ////MSG_INFO_SCREEN c=18
 const char MSG_WIZARD_CALIBRATION_FAILED[] PROGMEM_I1 = ISTR("Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."); ////MSG_WIZARD_CALIBRATION_FAILED c=20 r=8

Firmware/ultralcd.cpp

@@ -2179,14 +2179,14 @@ void lcd_loading_filament() {
 
 
 uint8_t lcd_alright() {
-    uint8_t cursor_pos = 1;
+    uint8_t cursor_pos = 0;
 
     lcd_clear();
-    lcd_puts_at_P(0, 0, _i("Changed correctly?"));////MSG_CORRECTLY c=20
+    lcd_puts_at_P(1, 0, _i("Changed correctly"));////MSG_CORRECTLY c=19
-    lcd_puts_at_P(1, 1, _T(MSG_YES));
+    lcd_puts_at_P(1, 1, _i("Filament not loaded"));////MSG_NOT_LOADED c=19
-    lcd_puts_at_P(1, 2, _i("Filament not loaded"));////MSG_NOT_LOADED c=19
+    lcd_puts_at_P(1, 2, _i("Color not correct"));////MSG_NOT_COLOR c=19
-    lcd_puts_at_P(1, 3, _i("Color not correct"));////MSG_NOT_COLOR c=19
+    lcd_puts_at_P(1, 3, _T(MSG_UNLOAD_FILAMENT));
-    lcd_putc_at(0, 1, '>');
+    lcd_putc_at(0, cursor_pos, '>');
 
     lcd_consume_click();
     while (1)
@@ -2199,21 +2199,20 @@ uint8_t lcd_alright() {
 
             if (lcd_encoder < 0 ) {
                 // Rotating knob counter clockwise
-                cursor_pos--;
+                if (cursor_pos > 0)
+                    cursor_pos--;
+                else
+                    Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
             } else if (lcd_encoder > 0) {
                 // Rotating knob clockwise
-                cursor_pos++;
+                if (cursor_pos < 3)
-            }
+                    cursor_pos++;
-            if (cursor_pos > 3) {
+                else
-                cursor_pos = 3;
+                    Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
-                Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
-            } else if (cursor_pos < 1) {
-                cursor_pos = 1;
-                Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
             }
 
             // Update '>' render only
-            lcd_puts_at_P(0, 1, PSTR(" \n \n "));
+            lcd_puts_at_P(0, 0, PSTR(" \n \n \n "));
             lcd_putc_at(0, cursor_pos, '>');
 
             // Consume rotation event and make feedback sound

lang/po/Firmware.pot

@@ -269,9 +269,9 @@ msgstr ""
 msgid "Change success!"
 msgstr ""
 
-#. MSG_CORRECTLY c=20
+#. MSG_CORRECTLY c=19
 #: ../../Firmware/ultralcd.cpp:2179
-msgid "Changed correctly?"
+msgid "Changed correctly"
 msgstr ""
 
 #. MSG_CHECKING_X c=20
@@ -2240,7 +2240,7 @@ msgstr ""
 msgid "Unload"
 msgstr ""
 
-#. MSG_UNLOAD_FILAMENT c=16
+#. MSG_UNLOAD_FILAMENT c=18
 #: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:5282
 #: ../../Firmware/ultralcd.cpp:5299
 msgid "Unload filament"

lang/po/Firmware_cs.po

@@ -285,10 +285,10 @@ msgstr "Vyměnit filament"
 msgid "Change success!"
 msgstr "Změna úspěšná!"
 
-#. MSG_CORRECTLY c=20
+#. MSG_CORRECTLY c=19
 #: ../../Firmware/ultralcd.cpp:2179
-msgid "Changed correctly?"
+msgid "Changed correctly"
-msgstr "Výměna ok?"
+msgstr "Výměna ok"
 
 #. MSG_CHECKING_X c=20
 #: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:5838
@@ -2189,7 +2189,7 @@ msgstr "MANUÁLNÍ VYJMUTÍ"
 msgid "Unload"
 msgstr "Vyjmout"
 
-#. MSG_UNLOAD_FILAMENT c=16
+#. MSG_UNLOAD_FILAMENT c=18
 #: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:5282
 #: ../../Firmware/ultralcd.cpp:5299
 msgid "Unload filament"

lang/po/Firmware_de.po

@@ -288,10 +288,10 @@ msgstr "Filament-Wechsel"
 msgid "Change success!"
 msgstr "Wechsel erfolgreich!"
 
-#. MSG_CORRECTLY c=20
+#. MSG_CORRECTLY c=19
 #: ../../Firmware/ultralcd.cpp:2179
-msgid "Changed correctly?"
+msgid "Changed correctly"
-msgstr "Wechsel ok?"
+msgstr "Wechsel ok"
 
 #. MSG_CHECKING_X c=20
 #: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:5838
@@ -2211,7 +2211,7 @@ msgstr "ENTLADE MANUELL"
 msgid "Unload"
 msgstr "Entla."
 
-#. MSG_UNLOAD_FILAMENT c=16
+#. MSG_UNLOAD_FILAMENT c=18
 #: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:5282
 #: ../../Firmware/ultralcd.cpp:5299
 msgid "Unload filament"

lang/po/Firmware_es.po

@@ -285,10 +285,10 @@ msgstr "Cambiar filamento"
 msgid "Change success!"
 msgstr "Cambio correcto!"
 
-#. MSG_CORRECTLY c=20
+#. MSG_CORRECTLY c=19
 #: ../../Firmware/ultralcd.cpp:2179
-msgid "Changed correctly?"
+msgid "Changed correctly"
-msgstr "¿Cambio correcto?"
+msgstr "Cambio correcto"
 
 #. MSG_CHECKING_X c=20
 #: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:5838
@@ -2216,7 +2216,7 @@ msgstr "DESCARGA MANUAL"
 msgid "Unload"
 msgstr "Desc."
 
-#. MSG_UNLOAD_FILAMENT c=16
+#. MSG_UNLOAD_FILAMENT c=18
 #: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:5282
 #: ../../Firmware/ultralcd.cpp:5299
 msgid "Unload filament"

lang/po/Firmware_fr.po

@@ -287,10 +287,10 @@ msgstr "Changer filament"
 msgid "Change success!"
 msgstr "Changement réussi!"
 
-#. MSG_CORRECTLY c=20
+#. MSG_CORRECTLY c=19
 #: ../../Firmware/ultralcd.cpp:2179
-msgid "Changed correctly?"
+msgid "Changed correctly"
-msgstr "Change correctement?"
+msgstr "Change correctement"
 
 #. MSG_CHECKING_X c=20
 #: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:5838
@@ -2217,7 +2217,7 @@ msgstr "DÉCHARGER MANUEL.T"
 msgid "Unload"
 msgstr "Déch."
 
-#. MSG_UNLOAD_FILAMENT c=16
+#. MSG_UNLOAD_FILAMENT c=18
 #: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:5282
 #: ../../Firmware/ultralcd.cpp:5299
 msgid "Unload filament"

lang/po/Firmware_hr.po

@@ -285,10 +285,10 @@ msgstr "Promijeni filament"
 msgid "Change success!"
 msgstr "Promijena uspjesna!"
 
-#. MSG_CORRECTLY c=20
+#. MSG_CORRECTLY c=19
 #: ../../Firmware/ultralcd.cpp:2179
-msgid "Changed correctly?"
+msgid "Changed correctly"
-msgstr "Ispravno izmjenjeno?"
+msgstr "Ispravno izmjenjeno"
 
 #. MSG_CHECKING_X c=20
 #: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:5838
@@ -2212,7 +2212,7 @@ msgstr "ISPRAZNI RUCNO"
 msgid "Unload"
 msgstr "Prazni"
 
-#. MSG_UNLOAD_FILAMENT c=16
+#. MSG_UNLOAD_FILAMENT c=18
 #: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:5282
 #: ../../Firmware/ultralcd.cpp:5299
 msgid "Unload filament"

lang/po/Firmware_hu.po

@@ -285,10 +285,10 @@ msgstr "Filament csere"
 msgid "Change success!"
 msgstr "Csere sikerult!"
 
-#. MSG_CORRECTLY c=20
+#. MSG_CORRECTLY c=19
 #: ../../Firmware/ultralcd.cpp:2179
-msgid "Changed correctly?"
+msgid "Changed correctly"
-msgstr "Sikerult a csere?"
+msgstr "Sikerult a csere"
 
 #. MSG_CHECKING_X c=20
 #: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:5838
@@ -2212,7 +2212,7 @@ msgstr "VEDD KI KEZZEL"
 msgid "Unload"
 msgstr "Kiadas"
 
-#. MSG_UNLOAD_FILAMENT c=16
+#. MSG_UNLOAD_FILAMENT c=18
 #: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:5282
 #: ../../Firmware/ultralcd.cpp:5299
 msgid "Unload filament"

lang/po/Firmware_it.po

@@ -287,10 +287,10 @@ msgstr "Cambia filamento"
 msgid "Change success!"
 msgstr "Cambio riuscito!"
 
-#. MSG_CORRECTLY c=20
+#. MSG_CORRECTLY c=19
 #: ../../Firmware/ultralcd.cpp:2179
-msgid "Changed correctly?"
+msgid "Changed correctly"
-msgstr "Cambio corretto?"
+msgstr "Cambio corretto"
 
 #. MSG_CHECKING_X c=20
 #: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:5838
@@ -2215,7 +2215,7 @@ msgstr "SCARICA MANUALMENTE"
 msgid "Unload"
 msgstr "Scarica"
 
-#. MSG_UNLOAD_FILAMENT c=16
+#. MSG_UNLOAD_FILAMENT c=18
 #: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:5282
 #: ../../Firmware/ultralcd.cpp:5299
 msgid "Unload filament"

lang/po/Firmware_nl.po

@@ -287,10 +287,10 @@ msgstr "Wissel filament"
 msgid "Change success!"
 msgstr "Wissel geslaagd!"
 
-#. MSG_CORRECTLY c=20
+#. MSG_CORRECTLY c=19
 #: ../../Firmware/ultralcd.cpp:2179
-msgid "Changed correctly?"
+msgid "Changed correctly"
-msgstr "Wissel ok?"
+msgstr "Wissel ok"
 
 #. MSG_CHECKING_X c=20
 #: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:5838
@@ -2221,7 +2221,7 @@ msgstr "ONTLAAD MANUEEL"
 msgid "Unload"
 msgstr "Ontla."
 
-#. MSG_UNLOAD_FILAMENT c=16
+#. MSG_UNLOAD_FILAMENT c=18
 #: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:5282
 #: ../../Firmware/ultralcd.cpp:5299
 msgid "Unload filament"

lang/po/Firmware_no.po

@@ -286,10 +286,10 @@ msgstr "Bytt filament"
 msgid "Change success!"
 msgstr "Bytte vellykket!"
 
-#. MSG_CORRECTLY c=20
+#. MSG_CORRECTLY c=19
 #: ../../Firmware/ultralcd.cpp:2179
-msgid "Changed correctly?"
+msgid "Changed correctly"
-msgstr "Byttet riktig?"
+msgstr "Byttet riktig"
 
 #. MSG_CHECKING_X c=20
 #: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:5838
@@ -2196,7 +2196,7 @@ msgstr "LAST UT MANUELT"
 msgid "Unload"
 msgstr "Last ut"
 
-#. MSG_UNLOAD_FILAMENT c=16
+#. MSG_UNLOAD_FILAMENT c=18
 #: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:5282
 #: ../../Firmware/ultralcd.cpp:5299
 msgid "Unload filament"

lang/po/Firmware_pl.po

@@ -286,10 +286,10 @@ msgstr "Wymiana filamentu"
 msgid "Change success!"
 msgstr "Wymiana udana!"
 
-#. MSG_CORRECTLY c=20
+#. MSG_CORRECTLY c=19
 #: ../../Firmware/ultralcd.cpp:2179
-msgid "Changed correctly?"
+msgid "Changed correctly"
-msgstr "Wymiana udała się?"
+msgstr "Wymiana udała się"
 
 #. MSG_CHECKING_X c=20
 #: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:5838
@@ -2212,7 +2212,7 @@ msgstr "WYŁADUJ RĘCZNIE"
 msgid "Unload"
 msgstr "Wyładuj"
 
-#. MSG_UNLOAD_FILAMENT c=16
+#. MSG_UNLOAD_FILAMENT c=18
 #: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:5282
 #: ../../Firmware/ultralcd.cpp:5299
 msgid "Unload filament"

lang/po/Firmware_ro.po

@@ -288,10 +288,10 @@ msgstr "Schimbă filamentul"
 msgid "Change success!"
 msgstr "Schimbare cu succes!"
 
-#. MSG_CORRECTLY c=20
+#. MSG_CORRECTLY c=19
 #: ../../Firmware/ultralcd.cpp:2179
-msgid "Changed correctly?"
+msgid "Changed correctly"
-msgstr "Schimbat corect?"
+msgstr "Schimbat corect"
 
 #. MSG_CHECKING_X c=20
 #: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:5838
@@ -2212,7 +2212,7 @@ msgstr "DESCĂRCARE MANUALĂ"
 msgid "Unload"
 msgstr "Descărc."
 
-#. MSG_UNLOAD_FILAMENT c=16
+#. MSG_UNLOAD_FILAMENT c=18
 #: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:5282
 #: ../../Firmware/ultralcd.cpp:5299
 msgid "Unload filament"

lang/po/Firmware_sk.po

@@ -285,10 +285,10 @@ msgstr "Vymeniť filament"
 msgid "Change success!"
 msgstr "Výmena úspešná!"
 
-#. MSG_CORRECTLY c=20
+#. MSG_CORRECTLY c=19
 #: ../../Firmware/ultralcd.cpp:2179
-msgid "Changed correctly?"
+msgid "Changed correctly"
-msgstr "Výmena ok?"
+msgstr "Výmena ok"
 
 #. MSG_CHECKING_X c=20
 #: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:5838
@@ -2202,7 +2202,7 @@ msgstr "UNLOAD MANUALLY"
 msgid "Unload"
 msgstr "Výsuv"
 
-#. MSG_UNLOAD_FILAMENT c=16
+#. MSG_UNLOAD_FILAMENT c=18
 #: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:5282
 #: ../../Firmware/ultralcd.cpp:5299
 msgid "Unload filament"

lang/po/Firmware_sv.po

@@ -286,10 +286,10 @@ msgstr "Ändra filament"
 msgid "Change success!"
 msgstr "Ändring utförd!"
 
-#. MSG_CORRECTLY c=20
+#. MSG_CORRECTLY c=19
 #: ../../Firmware/ultralcd.cpp:2179
-msgid "Changed correctly?"
+msgid "Changed correctly"
-msgstr "Ändring korrekt?"
+msgstr "Ändring korrekt"
 
 #. MSG_CHECKING_X c=20
 #: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:5838
@@ -2210,7 +2210,7 @@ msgstr "LADDA UR MANUELLT"
 msgid "Unload"
 msgstr "Ladda ur"
 
-#. MSG_UNLOAD_FILAMENT c=16
+#. MSG_UNLOAD_FILAMENT c=18
 #: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:5282
 #: ../../Firmware/ultralcd.cpp:5299
 msgid "Unload filament"