diff --git a/Firmware/Marlin_main.cpp b/Firmware/Marlin_main.cpp
index c70ed4ca4..fcc99e11f 100644
--- a/Firmware/Marlin_main.cpp
+++ b/Firmware/Marlin_main.cpp
@@ -5781,7 +5781,7 @@ Sigma_Exit:
         if(READ(X_MIN_PIN)^X_MIN_ENDSTOP_INVERTING){
           SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT));
         }else{
-          SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN));
+          SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
         }
         SERIAL_PROTOCOLLN("");
       #endif
@@ -5790,7 +5790,7 @@ Sigma_Exit:
         if(READ(X_MAX_PIN)^X_MAX_ENDSTOP_INVERTING){
           SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT));
         }else{
-          SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN));
+          SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
         }
         SERIAL_PROTOCOLLN("");
       #endif
@@ -5799,7 +5799,7 @@ Sigma_Exit:
         if(READ(Y_MIN_PIN)^Y_MIN_ENDSTOP_INVERTING){
           SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT));
         }else{
-          SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN));
+          SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
         }
         SERIAL_PROTOCOLLN("");
       #endif
@@ -5808,7 +5808,7 @@ Sigma_Exit:
         if(READ(Y_MAX_PIN)^Y_MAX_ENDSTOP_INVERTING){
           SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT));
         }else{
-          SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN));
+          SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
         }
         SERIAL_PROTOCOLLN("");
       #endif
@@ -5817,7 +5817,7 @@ Sigma_Exit:
         if(READ(Z_MIN_PIN)^Z_MIN_ENDSTOP_INVERTING){
           SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT));
         }else{
-          SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN));
+          SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
         }
         SERIAL_PROTOCOLLN("");
       #endif
@@ -5826,7 +5826,7 @@ Sigma_Exit:
         if(READ(Z_MAX_PIN)^Z_MAX_ENDSTOP_INVERTING){
           SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT));
         }else{
-          SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN));
+          SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
         }
         SERIAL_PROTOCOLLN("");
       #endif
diff --git a/Firmware/messages.c b/Firmware/messages.c
index cf64aa7d9..275afc9ba 100644
--- a/Firmware/messages.c
+++ b/Firmware/messages.c
@@ -26,7 +26,6 @@ const char MSG_CRASHDETECT_NA[] PROGMEM_I1 = ISTR("Crash det.  [N/A]"); ////c=0
 const char MSG_CRASHDETECT_OFF[] PROGMEM_I1 = ISTR("Crash det.  [off]"); ////c=0 r=0
 const char MSG_CRASHDETECT_ON[] PROGMEM_I1 = ISTR("Crash det.   [on]"); ////c=0 r=0
 const char MSG_ENDSTOP_HIT[] PROGMEM_I1 = ISTR("TRIGGERED"); ////c=0 r=0
-const char MSG_ENDSTOP_OPEN[] PROGMEM_I1 = ISTR("open"); ////c=0 r=0
 const char MSG_ERR_STOPPED[] PROGMEM_I1 = ISTR("Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"); ////c=0 r=0
 const char MSG_ERROR[] PROGMEM_I1 = ISTR("ERROR:"); ////c=0 r=0
 const char MSG_EXTRUDER[] PROGMEM_I1 = ISTR("Extruder"); ////c=17 r=1
@@ -122,3 +121,4 @@ const char MSG_ENDSTOPS_HIT[] PROGMEM_N1 = "endstops hit: "; ////c=0 r=0
 const char MSG_SD_ERR_WRITE_TO_FILE[] PROGMEM_N1 = "error writing to file"; ////c=0 r=0
 const char MSG_OK[] PROGMEM_N1 = "ok"; ////c=0 r=0
 const char MSG_SD_OPEN_FILE_FAIL[] PROGMEM_N1 = "open failed, File: "; ////c=0 r=0
+const char MSG_ENDSTOP_OPEN[] PROGMEM_N1 = "open"; ////c=0 r=0
diff --git a/Firmware/messages.h b/Firmware/messages.h
index 3f28d0318..202693b88 100644
--- a/Firmware/messages.h
+++ b/Firmware/messages.h
@@ -27,7 +27,6 @@ extern const char MSG_CRASHDETECT_NA[];
 extern const char MSG_CRASHDETECT_OFF[];
 extern const char MSG_CRASHDETECT_ON[];
 extern const char MSG_ENDSTOP_HIT[];
-extern const char MSG_ENDSTOP_OPEN[];
 extern const char MSG_ERR_STOPPED[];
 extern const char MSG_ERROR[];
 extern const char MSG_EXTRUDER[];
@@ -123,6 +122,7 @@ extern const char MSG_ENDSTOPS_HIT[];
 extern const char MSG_SD_ERR_WRITE_TO_FILE[];
 extern const char MSG_OK[];
 extern const char MSG_SD_OPEN_FILE_FAIL[];
+extern const char MSG_ENDSTOP_OPEN[];
 
 #if defined(__cplusplus)
 }
diff --git a/lang/lang_en.txt b/lang/lang_en.txt
index 2b4c337a5..c7186ea7c 100644
--- a/lang/lang_en.txt
+++ b/lang/lang_en.txt
@@ -556,9 +556,6 @@
 #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
 "Old settings found. Default PID, Esteps etc. will be set."
 
-#MSG_ENDSTOP_OPEN c=0 r=0
-"open"
-
 #
 "Now remove the test print from steel sheet."
 
diff --git a/lang/lang_en_cz.txt b/lang/lang_en_cz.txt
index 00191fb1b..e242b070b 100644
--- a/lang/lang_en_cz.txt
+++ b/lang/lang_en_cz.txt
@@ -742,10 +742,6 @@
 "Old settings found. Default PID, Esteps etc. will be set."
 "Neplatne hodnoty nastaveni. Bude pouzito vychozi PID, Esteps atd."
 
-#MSG_ENDSTOP_OPEN c=0 r=0
-"open"
-"otevrit"
-
 #
 "Now remove the test print from steel sheet."
 "Nyni odstrante testovaci vytisk z tiskoveho platu."
diff --git a/lang/lang_en_de.txt b/lang/lang_en_de.txt
index 238353996..c34f4f0b6 100644
--- a/lang/lang_en_de.txt
+++ b/lang/lang_en_de.txt
@@ -742,10 +742,6 @@
 "Old settings found. Default PID, Esteps etc. will be set."
 "Alte Einstellungen gefunden. Standard PID, E-Steps u.s.w. werden gesetzt."
 
-#MSG_ENDSTOP_OPEN c=0 r=0
-"open"
-"offen"
-
 #
 "Now remove the test print from steel sheet."
 "Testdruck jetzt von Stahlblech entfernen."
diff --git a/lang/lang_en_es.txt b/lang/lang_en_es.txt
index 6ed96ff9e..ce6598be1 100644
--- a/lang/lang_en_es.txt
+++ b/lang/lang_en_es.txt
@@ -742,10 +742,6 @@
 "Old settings found. Default PID, Esteps etc. will be set."
 "Se han encontrado ajustes anteriores. Se ajustara el PID, los pasos del extrusor, etc"
 
-#MSG_ENDSTOP_OPEN c=0 r=0
-"open"
-"abrir"
-
 #
 "Now remove the test print from steel sheet."
 "Ahora retira la prueba de la lamina de acero."
diff --git a/lang/lang_en_fr.txt b/lang/lang_en_fr.txt
index aae16a9dd..6f70d9b9d 100644
--- a/lang/lang_en_fr.txt
+++ b/lang/lang_en_fr.txt
@@ -742,10 +742,6 @@
 "Old settings found. Default PID, Esteps etc. will be set."
 "Anciens reglages trouves. Le PID, les Esteps etc. par defaut seront pris."
 
-#MSG_ENDSTOP_OPEN c=0 r=0
-"open"
-"ouvrir"
-
 #
 "Now remove the test print from steel sheet."
 "Retirez maintenant l'impression de test de la feuille d'acier."
diff --git a/lang/lang_en_it.txt b/lang/lang_en_it.txt
index 3d213703b..cb647d0af 100644
--- a/lang/lang_en_it.txt
+++ b/lang/lang_en_it.txt
@@ -742,10 +742,6 @@
 "Old settings found. Default PID, Esteps etc. will be set."
 "Sono state trovate impostazioni vecchie. I valori di default di PID, Esteps etc. saranno impostati"
 
-#MSG_ENDSTOP_OPEN c=0 r=0
-"open"
-"apri"
-
 #
 "Now remove the test print from steel sheet."
 "Ora rimuovete la stampa di prova dalla piastra in acciaio."
diff --git a/lang/lang_en_pl.txt b/lang/lang_en_pl.txt
index 6bf9aeda2..1e489d20c 100644
--- a/lang/lang_en_pl.txt
+++ b/lang/lang_en_pl.txt
@@ -742,10 +742,6 @@
 "Old settings found. Default PID, Esteps etc. will be set."
 "Znaleziono stare ustawienia. Zostana przywrocone domyslne ust. PID, Esteps, itp."
 
-#MSG_ENDSTOP_OPEN c=0 r=0
-"open"
-"otworz"
-
 #
 "Now remove the test print from steel sheet."
 "Teraz zdejmij wydruk testowy ze stolu."