josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Also save fan speeds during a thermal error pause 

Similarly to temperatures, the fan speed is overwritten and needs to be
restored appropriately.
This commit is contained in:
Yuri D'Elia 2022-07-07 11:20:33 +02:00
parent c98e133ae2
commit 1eb7871bab
3 changed files with 7 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Firmware/Marlin.h
View File

@ -340,6 +340,7 @@ extern uint8_t saved_printing_type;
extern float saved_extruder_temperature; //!< Active extruder temperature
extern float saved_bed_temperature; //!< Bed temperature
extern int saved_fan_speed; //!< Print fan speed
//save/restore printing in case that mmu is not responding
extern bool mmu_print_saved;

8
Firmware/Marlin_main.cpp
View File

@ -383,7 +383,7 @@ static uint8_t saved_active_extruder = 0;
float saved_extruder_temperature = 0.0; //!< Active extruder temperature
float saved_bed_temperature = 0.0; //!< Bed temperature
static bool saved_extruder_relative_mode = false;
static int saved_fanSpeed = 0; //!< Print fan speed
int saved_fan_speed = 0; //!< Print fan speed
//! @}
static int saved_feedmultiply_mm = 100;
@ -9997,9 +9997,11 @@ void ThermalStop(bool allow_pause)
// original values after the pause handler is called.
float bed_temp = saved_bed_temperature;
float ext_temp = saved_extruder_temperature;
int fan_speed = saved_fan_speed;
lcd_pause_print();
saved_bed_temperature = bed_temp;
saved_extruder_temperature = ext_temp;
saved_fan_speed = fan_speed;
}
} else {
// We got a hard thermal error and/or there is no print going on. Just stop.
@ -11584,7 +11586,7 @@ void stop_and_save_print_to_ram(float z_move, float e_move)
saved_extruder_temperature = degTargetHotend(active_extruder);
saved_bed_temperature = degBed();
saved_extruder_relative_mode = axis_relative_modes & E_AXIS_MASK;
saved_fanSpeed = fanSpeed;
saved_fan_speed = fanSpeed;
cmdqueue_reset(); //empty cmdqueue
card.sdprinting = false;
// card.closefile();
@ -11653,7 +11655,7 @@ void restore_print_from_ram_and_continue(float e_move)
// restore active_extruder
active_extruder = saved_active_extruder;
fanSpeed = saved_fanSpeed;
fanSpeed = saved_fan_speed;
if (degTargetHotend(saved_active_extruder) != saved_extruder_temperature)
{
setTargetHotendSafe(saved_extruder_temperature, saved_active_extruder);

1
Firmware/temperature.cpp
View File

@ -500,6 +500,7 @@ void set_temp_error(TempErrorSource source, uint8_t index, TempErrorType type)
if(!temp_error_state.error) {
saved_bed_temperature = target_temperature_bed;
saved_extruder_temperature = target_temperature[index];
saved_fan_speed = fanSpeed;
}
// keep disabling heaters and keep fans on as long as the condition is asserted