josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

removed duplicit code in setup function, G98 stores farm number to eeprom, shipping prep: fixed typo

This commit is contained in:
PavelSindler 2017-09-04 14:41:31 +02:00
parent 64efc982d2
commit 1ed4dcfca1
1 changed files with 7 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
Firmware/Marlin_main.cpp
View File

@ -963,7 +963,7 @@ void factory_reset(char level, bool quiet)
// Force the "Follow calibration flow" message at the next boot up.
calibration_status_store(CALIBRATION_STATUS_Z_CALIBRATION);
farm_no = 0;
farm_mode == false;
farm_mode = false;
eeprom_update_byte((uint8_t*)EEPROM_FARM_MODE, farm_mode);
EEPROM_save_B(EEPROM_FARM_NUMBER, &farm_no);
@ -1026,7 +1026,7 @@ void setup()
setup_powerhold();
farm_mode = eeprom_read_byte((uint8_t*)EEPROM_FARM_MODE);
EEPROM_read_B(EEPROM_FARM_NUMBER, &farm_no);
//if ((farm_mode == 0xFF && farm_no == 0) || (farm_no == 0xFFFF)) farm_mode = false; //if farm_mode has not been stored to eeprom yet and farm number is set to zero or EEPROM is fresh, deactivate farm mode
if ((farm_mode == 0xFF && farm_no == 0) || (farm_no == 0xFFFF)) farm_mode = false; //if farm_mode has not been stored to eeprom yet and farm number is set to zero or EEPROM is fresh, deactivate farm mode
if (farm_no == 0xFFFF) farm_no = 0;
if (farm_mode)
{
@ -1041,6 +1041,7 @@ void setup()
SERIAL_PROTOCOLLNPGM("start");
SERIAL_ECHO_START;
#if 0
SERIAL_ECHOLN("Reading eeprom from 0 to 100: start");
for (int i = 0; i < 4096; ++i) {
@ -1184,17 +1185,7 @@ void setup()
#if defined(Z_AXIS_ALWAYS_ON)
enable_z();
#endif
farm_mode = eeprom_read_byte((uint8_t*)EEPROM_FARM_MODE);
EEPROM_read_B(EEPROM_FARM_NUMBER, &farm_no);
if ((farm_mode == 0xFF && farm_no == 0) || (farm_no == 0xFFFF)) farm_mode = false; //if farm_mode has not been stored to eeprom yet and farm number is set to zero or EEPROM is fresh, deactivate farm mode
if (farm_no == 0xFFFF) farm_no = 0;
if (farm_mode)
{
prusa_statistics(8);
no_response = true; //we need confirmation by recieving PRUSA thx
important_status = 8;
}
// Enable Toshiba FlashAir SD card / WiFi enahanced card.
card.ToshibaFlashAir_enable(eeprom_read_byte((unsigned char*)EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY) == 1);
// Force SD card update. Otherwise the SD card update is done from loop() on card.checkautostart(false),
@ -1354,6 +1345,7 @@ int serial_read_stream() {
* while the machine is not accepting commands.
*/
void host_keepalive() {
if (farm_mode) return;
long ms = millis();
if (host_keepalive_interval && busy_state != NOT_BUSY) {
if (ms - prev_busy_signal_ms < 1000UL * host_keepalive_interval) return;
@ -3512,7 +3504,9 @@ void process_commands()
case 98: //activate farm mode
farm_mode = 1;
PingTime = millis();
EEPROM_save_B(EEPROM_FARM_NUMBER, &farm_no);
eeprom_update_byte((unsigned char *)EEPROM_FARM_MODE, farm_mode);
break;
case 99: //deactivate farm mode