diff --git a/Firmware/mmu2/errors_list.h b/Firmware/mmu2/errors_list.h
index b51b89cba..5a7c35630 100644
--- a/Firmware/mmu2/errors_list.h
+++ b/Firmware/mmu2/errors_list.h
@@ -332,7 +332,7 @@ static const char MSG_BTN_RESTART_MMU[] PROGMEM_I1 = ISTR("RstMMU"); ////MSG_BTN
 static const char MSG_BTN_UNLOAD[] PROGMEM_I1 = ISTR("Unload"); ////MSG_BTN_UNLOAD c=8
 static const char MSG_BTN_STOP[] PROGMEM_I1 = ISTR("Stop"); ////MSG_BTN_STOP c=8
 static const char MSG_BTN_DISABLE_MMU[] PROGMEM_I1 = ISTR("Disable"); ////MSG_BTN_DISABLE_MMU c=8
-static const char MSG_BTN_MORE[] PROGMEM_I1 = ISTR("\x06"); ////MSG_BTN_MORE c=8 //@todo convert to PROGMEM_N1
+static const char MSG_BTN_MORE[] PROGMEM_N1 = "\x06";
 
 // Used to parse the buttons from Btns().
 static const char * const btnOperation[] PROGMEM = {
diff --git a/Firmware/mmu2_error_converter.cpp b/Firmware/mmu2_error_converter.cpp
index 15c66bb83..0f9975026 100644
--- a/Firmware/mmu2_error_converter.cpp
+++ b/Firmware/mmu2_error_converter.cpp
@@ -172,7 +172,7 @@ const char * PrusaErrorButtonTitle(uint8_t bi){
 }
 
 const char * PrusaErrorButtonMore(){
-    return _R(MSG_BTN_MORE);//@todo convert to PROGMEM_N1
+    return MSG_BTN_MORE;
 }
 
 struct ResetOnExit {
diff --git a/Firmware/mmu2_reporting.cpp b/Firmware/mmu2_reporting.cpp
index 46d2c97aa..2fe63f46b 100644
--- a/Firmware/mmu2_reporting.cpp
+++ b/Firmware/mmu2_reporting.cpp
@@ -77,8 +77,7 @@ static void ReportErrorHookStaticRender(uint8_t ei) {
     ReportErrorHookSensorLineRender();
 
     // Render the choices
-    //@todo convert MSG_BTN_MORE to PROGMEM_N1
-    lcd_show_choices_prompt_P(two_choices ? LCD_LEFT_BUTTON_CHOICE : LCD_MIDDLE_BUTTON_CHOICE, _T(PrusaErrorButtonTitle(button_op_middle)), _T(two_choices ? PrusaErrorButtonMore() : PrusaErrorButtonTitle(button_op_right)), two_choices ? 18 : 9, two_choices ? nullptr : _T(PrusaErrorButtonMore()));
+    lcd_show_choices_prompt_P(two_choices ? LCD_LEFT_BUTTON_CHOICE : LCD_MIDDLE_BUTTON_CHOICE, _T(PrusaErrorButtonTitle(button_op_middle)), _T(two_choices ? PrusaErrorButtonMore() : PrusaErrorButtonTitle(button_op_right)), two_choices ? 18 : 9, two_choices ? nullptr : PrusaErrorButtonMore());
 }
 
 void ReportErrorHookSensorLineRender(){
diff --git a/lang/po/Firmware.pot b/lang/po/Firmware.pot
index d62e9c56e..079aea90e 100644
--- a/lang/po/Firmware.pot
+++ b/lang/po/Firmware.pot
@@ -384,7 +384,7 @@ msgid ""
 msgstr ""
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:315
+#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:314
 #: ../../Firmware/ultralcd.cpp:5002 ../../Firmware/ultralcd.cpp:5426
 msgid "Cut filament"
 msgstr ""
@@ -478,7 +478,7 @@ msgid "ERROR:"
 msgstr ""
 
 #. MSG_EJECT_FROM_MMU c=16
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:319
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:318
 #: ../../Firmware/ultralcd.cpp:4984 ../../Firmware/ultralcd.cpp:5423
 msgid "Eject from MMU"
 msgstr ""
@@ -1059,7 +1059,7 @@ msgstr ""
 #. MSG_LOADING_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:3606 ../../Firmware/messages.cpp:57
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/mmu2_reporting.cpp:327 ../../Firmware/ultralcd.cpp:2205
+#: ../../Firmware/mmu2_reporting.cpp:326 ../../Firmware/ultralcd.cpp:2205
 #: ../../Firmware/ultralcd.cpp:3798
 msgid "Loading filament"
 msgstr ""
@@ -1109,7 +1109,7 @@ msgid "MMU NOT RESPONDING"
 msgstr ""
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2_reporting.cpp:331
+#: ../../Firmware/mmu2_reporting.cpp:330
 msgid "MMU Retry: Restoring temperature..."
 msgstr ""
 
@@ -2111,7 +2111,7 @@ msgid "Temperatures"
 msgstr ""
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:323
+#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:322
 msgid "Testing filament"
 msgstr ""
 
@@ -2435,13 +2435,6 @@ msgstr ""
 msgid "unknown state"
 msgstr ""
 
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:335
-#: ../../Firmware/mmu2_error_converter.cpp:175
-msgid "⏬"
-msgstr ""
-
 #. MSG_REFRESH c=18
 #: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:5938
 #: ../../Firmware/ultralcd.cpp:5941
diff --git a/lang/po/Firmware_cs.po b/lang/po/Firmware_cs.po
index bd3d0f7f7..0dace97f7 100644
--- a/lang/po/Firmware_cs.po
+++ b/lang/po/Firmware_cs.po
@@ -403,7 +403,7 @@ msgstr ""
 "Normal modu"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:315
+#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:314
 #: ../../Firmware/ultralcd.cpp:5002 ../../Firmware/ultralcd.cpp:5426
 msgid "Cut filament"
 msgstr "Ustrihnout"
@@ -1084,7 +1084,7 @@ msgstr "Cisteni barvy"
 #. MSG_LOADING_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:3606 ../../Firmware/messages.cpp:57
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/mmu2_reporting.cpp:327 ../../Firmware/ultralcd.cpp:2205
+#: ../../Firmware/mmu2_reporting.cpp:326 ../../Firmware/ultralcd.cpp:2205
 #: ../../Firmware/ultralcd.cpp:3798
 msgid "Loading filament"
 msgstr "Zavadeni filamentu"
@@ -1122,7 +1122,7 @@ msgid "MMU NOT RESPONDING"
 msgstr "MMU NEODPOVIDA"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2_reporting.cpp:331
+#: ../../Firmware/mmu2_reporting.cpp:330
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU opakovani: Obnova teploty..."
 
@@ -2137,7 +2137,7 @@ msgid "Temperatures"
 msgstr "Teploty"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:323
+#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:322
 msgid "Testing filament"
 msgstr "Testovani filamentu"
 
@@ -2457,13 +2457,6 @@ msgstr "neznamy"
 msgid "unknown state"
 msgstr "neznamy stav"
 
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:335
-#: ../../Firmware/mmu2_error_converter.cpp:175
-msgid "⏬"
-msgstr "⏬"
-
 #. MSG_REFRESH c=18
 #: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:5938
 #: ../../Firmware/ultralcd.cpp:5941
@@ -2476,7 +2469,7 @@ msgid "MMU power fails"
 msgstr "MMU vyp. proudu"
 
 #. MSG_EJECT_FROM_MMU c=16
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:319
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:318
 #: ../../Firmware/ultralcd.cpp:4984 ../../Firmware/ultralcd.cpp:5423
 msgid "Eject from MMU"
 msgstr "Vysunutí z MMU"
@@ -2548,6 +2541,9 @@ msgstr ""
 "Verze firmwaru jednotky MMU není kompatibilní s FW tiskárny. Aktualizujte na"
 " verzi 2.1.9."
 
+#~ msgid "⏬"
+#~ msgstr "⏬"
+
 #~ msgid "Eject filament"
 #~ msgstr "Vysunout fil."
 
diff --git a/lang/po/Firmware_de.po b/lang/po/Firmware_de.po
index 14dca3ba1..c0322b2f9 100644
--- a/lang/po/Firmware_de.po
+++ b/lang/po/Firmware_de.po
@@ -406,7 +406,7 @@ msgstr ""
 "genutzt werden"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:315
+#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:314
 #: ../../Firmware/ultralcd.cpp:5002 ../../Firmware/ultralcd.cpp:5426
 msgid "Cut filament"
 msgstr "Fil. schneiden"
@@ -1095,7 +1095,7 @@ msgstr "Lade Farbe"
 #. MSG_LOADING_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:3606 ../../Firmware/messages.cpp:57
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/mmu2_reporting.cpp:327 ../../Firmware/ultralcd.cpp:2205
+#: ../../Firmware/mmu2_reporting.cpp:326 ../../Firmware/ultralcd.cpp:2205
 #: ../../Firmware/ultralcd.cpp:3798
 msgid "Loading filament"
 msgstr "Filament lädt"
@@ -1133,7 +1133,7 @@ msgid "MMU NOT RESPONDING"
 msgstr "MMU REAGIERT NICHT"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2_reporting.cpp:331
+#: ../../Firmware/mmu2_reporting.cpp:330
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU-Neuversuch: Wiederherstelle die Temperatur..."
 
@@ -2158,7 +2158,7 @@ msgid "Temperatures"
 msgstr "Temperaturen"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:323
+#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:322
 msgid "Testing filament"
 msgstr "Teste filament"
 
@@ -2484,13 +2484,6 @@ msgstr "unbekannt"
 msgid "unknown state"
 msgstr "Status unbekannt"
 
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:335
-#: ../../Firmware/mmu2_error_converter.cpp:175
-msgid "⏬"
-msgstr "⏬"
-
 #. MSG_REFRESH c=18
 #: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:5938
 #: ../../Firmware/ultralcd.cpp:5941
@@ -2503,7 +2496,7 @@ msgid "MMU power fails"
 msgstr "MMU Netzfehler"
 
 #. MSG_EJECT_FROM_MMU c=16
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:319
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:318
 #: ../../Firmware/ultralcd.cpp:4984 ../../Firmware/ultralcd.cpp:5423
 msgid "Eject from MMU"
 msgstr "Aus MMU auswerf."
@@ -2576,6 +2569,9 @@ msgstr ""
 "Die Firmware-Version der MMU-Einheit ist mit der FW des Druckers nicht "
 "kompatibel. Update auf Version 2.1.9."
 
+#~ msgid "⏬"
+#~ msgstr "⏬"
+
 #~ msgid "Eject filament"
 #~ msgstr "Filamentauswurf"
 
diff --git a/lang/po/Firmware_es.po b/lang/po/Firmware_es.po
index 790ab7070..1ecf95c0d 100644
--- a/lang/po/Firmware_es.po
+++ b/lang/po/Firmware_es.po
@@ -403,7 +403,7 @@ msgstr ""
 "Modo normal"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:315
+#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:314
 #: ../../Firmware/ultralcd.cpp:5002 ../../Firmware/ultralcd.cpp:5426
 msgid "Cut filament"
 msgstr "Cortar filament"
@@ -500,7 +500,7 @@ msgid "ERROR:"
 msgstr "ERROR:"
 
 #. MSG_EJECT_FROM_MMU c=16
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:319
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:318
 #: ../../Firmware/ultralcd.cpp:4984 ../../Firmware/ultralcd.cpp:5423
 msgid "Eject from MMU"
 msgstr "Expulsar de MMU"
@@ -1096,7 +1096,7 @@ msgstr "Cambiando color"
 #. MSG_LOADING_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:3606 ../../Firmware/messages.cpp:57
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/mmu2_reporting.cpp:327 ../../Firmware/ultralcd.cpp:2205
+#: ../../Firmware/mmu2_reporting.cpp:326 ../../Firmware/ultralcd.cpp:2205
 #: ../../Firmware/ultralcd.cpp:3798
 msgid "Loading filament"
 msgstr "Introduciendo filam."
@@ -1134,7 +1134,7 @@ msgid "MMU NOT RESPONDING"
 msgstr "MMU NO RESPONDE"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2_reporting.cpp:331
+#: ../../Firmware/mmu2_reporting.cpp:330
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU Reintento: Restaurando temperatura..."
 
@@ -2165,7 +2165,7 @@ msgid "Temperatures"
 msgstr "Temperaturas"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:323
+#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:322
 msgid "Testing filament"
 msgstr "Probando filamento"
 
@@ -2487,13 +2487,6 @@ msgstr "desconocido"
 msgid "unknown state"
 msgstr "estado desconocido"
 
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:335
-#: ../../Firmware/mmu2_error_converter.cpp:175
-msgid "⏬"
-msgstr "⏬"
-
 #. MSG_REFRESH c=18
 #: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:5938
 #: ../../Firmware/ultralcd.cpp:5941
@@ -2573,6 +2566,9 @@ msgstr ""
 "La versión de firmware de la unidad MMU es incompatible con el FW de la "
 "impresora. Actualizar a la versión 2.1.9."
 
+#~ msgid "⏬"
+#~ msgstr "⏬"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"
 
diff --git a/lang/po/Firmware_fr.po b/lang/po/Firmware_fr.po
index b1bcdd562..605bdbba9 100644
--- a/lang/po/Firmware_fr.po
+++ b/lang/po/Firmware_fr.po
@@ -406,7 +406,7 @@ msgstr ""
 "mode Normal"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:315
+#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:314
 #: ../../Firmware/ultralcd.cpp:5002 ../../Firmware/ultralcd.cpp:5426
 msgid "Cut filament"
 msgstr "Coupe filament"
@@ -504,7 +504,7 @@ msgid "ERROR:"
 msgstr "ERREUR:"
 
 #. MSG_EJECT_FROM_MMU c=16
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:319
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:318
 #: ../../Firmware/ultralcd.cpp:4984 ../../Firmware/ultralcd.cpp:5423
 msgid "Eject from MMU"
 msgstr "Éjecter du MMU"
@@ -1102,7 +1102,7 @@ msgstr "Charg. de la couleur"
 #. MSG_LOADING_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:3606 ../../Firmware/messages.cpp:57
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/mmu2_reporting.cpp:327 ../../Firmware/ultralcd.cpp:2205
+#: ../../Firmware/mmu2_reporting.cpp:326 ../../Firmware/ultralcd.cpp:2205
 #: ../../Firmware/ultralcd.cpp:3798
 msgid "Loading filament"
 msgstr "Chargement du fil."
@@ -1140,7 +1140,7 @@ msgid "MMU NOT RESPONDING"
 msgstr "LE MMU NE REPOND PAS"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2_reporting.cpp:331
+#: ../../Firmware/mmu2_reporting.cpp:330
 msgid "MMU Retry: Restoring temperature..."
 msgstr "Nouvelle tentative MMU: Restauration de la temperature..."
 
@@ -2168,7 +2168,7 @@ msgid "Temperatures"
 msgstr "Temperatures"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:323
+#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:322
 msgid "Testing filament"
 msgstr "Test du filament"
 
@@ -2499,13 +2499,6 @@ msgstr "inconnu"
 msgid "unknown state"
 msgstr "Etat inconnu"
 
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:335
-#: ../../Firmware/mmu2_error_converter.cpp:175
-msgid "⏬"
-msgstr "⏬"
-
 #. MSG_REFRESH c=18
 #: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:5938
 #: ../../Firmware/ultralcd.cpp:5941
@@ -2584,6 +2577,9 @@ msgstr ""
 "La version du MMU est incompatible avec le FW de l'imprimante. Mise à jour "
 "vers la version 2.1.9."
 
+#~ msgid "⏬"
+#~ msgstr "⏬"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reini MMU"
 
diff --git a/lang/po/Firmware_hr.po b/lang/po/Firmware_hr.po
index 6c85efc79..8054e85c6 100644
--- a/lang/po/Firmware_hr.po
+++ b/lang/po/Firmware_hr.po
@@ -400,7 +400,7 @@ msgid ""
 msgstr "Detekcija udarca moze biti ukljuceno samo u Normalnom nacinu rada"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:315
+#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:314
 #: ../../Firmware/ultralcd.cpp:5002 ../../Firmware/ultralcd.cpp:5426
 msgid "Cut filament"
 msgstr "Odrezite fil."
@@ -499,7 +499,7 @@ msgid "ERROR:"
 msgstr "POGRESKA:"
 
 #. MSG_EJECT_FROM_MMU c=16
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:319
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:318
 #: ../../Firmware/ultralcd.cpp:4984 ../../Firmware/ultralcd.cpp:5423
 msgid "Eject from MMU"
 msgstr "Izbaci iz MMU"
@@ -1094,7 +1094,7 @@ msgstr "Ucitavanje boje"
 #. MSG_LOADING_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:3606 ../../Firmware/messages.cpp:57
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/mmu2_reporting.cpp:327 ../../Firmware/ultralcd.cpp:2205
+#: ../../Firmware/mmu2_reporting.cpp:326 ../../Firmware/ultralcd.cpp:2205
 #: ../../Firmware/ultralcd.cpp:3798
 msgid "Loading filament"
 msgstr "Punjenje filamenta"
@@ -1132,7 +1132,7 @@ msgid "MMU NOT RESPONDING"
 msgstr "MMU NE ODGOVARA"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2_reporting.cpp:331
+#: ../../Firmware/mmu2_reporting.cpp:330
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU Ponovni pokusaj: Vracanje temperature..."
 
@@ -2159,7 +2159,7 @@ msgid "Temperatures"
 msgstr "Temperature"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:323
+#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:322
 msgid "Testing filament"
 msgstr "Testiram filament"
 
@@ -2480,13 +2480,6 @@ msgstr "nepoznato"
 msgid "unknown state"
 msgstr "nepoznato stanje"
 
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:335
-#: ../../Firmware/mmu2_error_converter.cpp:175
-msgid "⏬"
-msgstr "⏬"
-
 #. MSG_REFRESH c=18
 #: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:5938
 #: ../../Firmware/ultralcd.cpp:5941
@@ -2565,6 +2558,9 @@ msgstr ""
 "Verzija firmware-a MMU jedinice nekompatibilna s FW-om pisača. Ažuriranje na"
 " verziju 2.1.9."
 
+#~ msgid "⏬"
+#~ msgstr "⏬"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"
 
diff --git a/lang/po/Firmware_hu.po b/lang/po/Firmware_hu.po
index 422461653..b27d4c136 100644
--- a/lang/po/Firmware_hu.po
+++ b/lang/po/Firmware_hu.po
@@ -403,7 +403,7 @@ msgstr ""
 "kapcsolhato be"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:315
+#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:314
 #: ../../Firmware/ultralcd.cpp:5002 ../../Firmware/ultralcd.cpp:5426
 msgid "Cut filament"
 msgstr "Filament vagasa"
@@ -502,7 +502,7 @@ msgid "ERROR:"
 msgstr "HIBA:"
 
 #. MSG_EJECT_FROM_MMU c=16
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:319
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:318
 #: ../../Firmware/ultralcd.cpp:4984 ../../Firmware/ultralcd.cpp:5423
 msgid "Eject from MMU"
 msgstr "Kiadás az MMUból"
@@ -1097,7 +1097,7 @@ msgstr "Szin tisztitasa"
 #. MSG_LOADING_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:3606 ../../Firmware/messages.cpp:57
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/mmu2_reporting.cpp:327 ../../Firmware/ultralcd.cpp:2205
+#: ../../Firmware/mmu2_reporting.cpp:326 ../../Firmware/ultralcd.cpp:2205
 #: ../../Firmware/ultralcd.cpp:3798
 msgid "Loading filament"
 msgstr "Filament betoltese"
@@ -1135,7 +1135,7 @@ msgid "MMU NOT RESPONDING"
 msgstr "MMU NEM VALASZOL"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2_reporting.cpp:331
+#: ../../Firmware/mmu2_reporting.cpp:330
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU Ujra: Homerseklet visszaallitasa"
 
@@ -2159,7 +2159,7 @@ msgid "Temperatures"
 msgstr "Homersekletek"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:323
+#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:322
 msgid "Testing filament"
 msgstr "Filament tesztelese"
 
@@ -2485,13 +2485,6 @@ msgstr "ismeretlen"
 msgid "unknown state"
 msgstr "ismeretlen allapot"
 
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:335
-#: ../../Firmware/mmu2_error_converter.cpp:175
-msgid "⏬"
-msgstr "⏬"
-
 #. MSG_REFRESH c=18
 #: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:5938
 #: ../../Firmware/ultralcd.cpp:5941
@@ -2570,6 +2563,9 @@ msgstr ""
 "Az MMU egység firmware-verziója nem kompatibilis a nyomtató FW-vel. "
 "Frissítés a 2.1.9-es verzióra."
 
+#~ msgid "⏬"
+#~ msgstr "⏬"
+
 #~ msgid "Reset MMU"
 #~ msgstr "MMUreszet"
 
diff --git a/lang/po/Firmware_it.po b/lang/po/Firmware_it.po
index deb8d11c7..98d9deef5 100644
--- a/lang/po/Firmware_it.po
+++ b/lang/po/Firmware_it.po
@@ -405,7 +405,7 @@ msgstr ""
 "in Modalita normale"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:315
+#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:314
 #: ../../Firmware/ultralcd.cpp:5002 ../../Firmware/ultralcd.cpp:5426
 msgid "Cut filament"
 msgstr "Taglia filamento"
@@ -503,7 +503,7 @@ msgid "ERROR:"
 msgstr "ERRORE:"
 
 #. MSG_EJECT_FROM_MMU c=16
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:319
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:318
 #: ../../Firmware/ultralcd.cpp:4984 ../../Firmware/ultralcd.cpp:5423
 msgid "Eject from MMU"
 msgstr "Espelli da MMU"
@@ -1098,7 +1098,7 @@ msgstr "Caricando colore"
 #. MSG_LOADING_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:3606 ../../Firmware/messages.cpp:57
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/mmu2_reporting.cpp:327 ../../Firmware/ultralcd.cpp:2205
+#: ../../Firmware/mmu2_reporting.cpp:326 ../../Firmware/ultralcd.cpp:2205
 #: ../../Firmware/ultralcd.cpp:3798
 msgid "Loading filament"
 msgstr "Caricando filamento"
@@ -1136,7 +1136,7 @@ msgid "MMU NOT RESPONDING"
 msgstr "MMU NON RISPONDE"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2_reporting.cpp:331
+#: ../../Firmware/mmu2_reporting.cpp:330
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU Riprova. Ripristino temperatura..."
 
@@ -2162,7 +2162,7 @@ msgid "Temperatures"
 msgstr "Temperature"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:323
+#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:322
 msgid "Testing filament"
 msgstr "Provo il filamento"
 
@@ -2486,13 +2486,6 @@ msgstr "sconosciuto"
 msgid "unknown state"
 msgstr "stato sconosciuto"
 
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:335
-#: ../../Firmware/mmu2_error_converter.cpp:175
-msgid "⏬"
-msgstr "⏬"
-
 #. MSG_REFRESH c=18
 #: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:5938
 #: ../../Firmware/ultralcd.cpp:5941
@@ -2571,6 +2564,9 @@ msgstr ""
 "La versione del firmware dell'unità MMU non è compatibile con il firmware "
 "della stampante. Aggiornamento alla versione 2.1.9."
 
+#~ msgid "⏬"
+#~ msgstr "⏬"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"
 
diff --git a/lang/po/Firmware_nl.po b/lang/po/Firmware_nl.po
index f8d2798c7..06517c3f6 100644
--- a/lang/po/Firmware_nl.po
+++ b/lang/po/Firmware_nl.po
@@ -405,7 +405,7 @@ msgstr ""
 "gebruikt worden"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:315
+#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:314
 #: ../../Firmware/ultralcd.cpp:5002 ../../Firmware/ultralcd.cpp:5426
 msgid "Cut filament"
 msgstr "Fil. knippen"
@@ -504,7 +504,7 @@ msgid "ERROR:"
 msgstr "FOUT:"
 
 #. MSG_EJECT_FROM_MMU c=16
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:319
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:318
 #: ../../Firmware/ultralcd.cpp:4984 ../../Firmware/ultralcd.cpp:5423
 msgid "Eject from MMU"
 msgstr "Uitwerp. van MMU"
@@ -1099,7 +1099,7 @@ msgstr "Laden kleur"
 #. MSG_LOADING_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:3606 ../../Firmware/messages.cpp:57
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/mmu2_reporting.cpp:327 ../../Firmware/ultralcd.cpp:2205
+#: ../../Firmware/mmu2_reporting.cpp:326 ../../Firmware/ultralcd.cpp:2205
 #: ../../Firmware/ultralcd.cpp:3798
 msgid "Loading filament"
 msgstr "Laden filament"
@@ -1137,7 +1137,7 @@ msgid "MMU NOT RESPONDING"
 msgstr "MMU REAGEERT NIET"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2_reporting.cpp:331
+#: ../../Firmware/mmu2_reporting.cpp:330
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU Retry: Temperatuur herstellen..."
 
@@ -2168,7 +2168,7 @@ msgid "Temperatures"
 msgstr "Temperaturen"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:323
+#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:322
 msgid "Testing filament"
 msgstr "Teste filament"
 
@@ -2489,13 +2489,6 @@ msgstr "onbekend"
 msgid "unknown state"
 msgstr "Status onbekend"
 
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:335
-#: ../../Firmware/mmu2_error_converter.cpp:175
-msgid "⏬"
-msgstr "⏬"
-
 #. MSG_REFRESH c=18
 #: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:5938
 #: ../../Firmware/ultralcd.cpp:5941
@@ -2575,6 +2568,9 @@ msgstr ""
 "De firmwareversie van de MMU-eenheid is niet compatibel met de firmware van "
 "de printer. Update naar versie 2.1.9."
 
+#~ msgid "⏬"
+#~ msgstr "⏬"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"
 
diff --git a/lang/po/Firmware_no.po b/lang/po/Firmware_no.po
index 0d5961e32..a7545a20b 100644
--- a/lang/po/Firmware_no.po
+++ b/lang/po/Firmware_no.po
@@ -404,7 +404,7 @@ msgstr ""
 "Normal modus"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:315
+#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:314
 #: ../../Firmware/ultralcd.cpp:5002 ../../Firmware/ultralcd.cpp:5426
 msgid "Cut filament"
 msgstr "Kutt filament"
@@ -502,7 +502,7 @@ msgid "ERROR:"
 msgstr "FEIL:"
 
 #. MSG_EJECT_FROM_MMU c=16
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:319
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:318
 #: ../../Firmware/ultralcd.cpp:4984 ../../Firmware/ultralcd.cpp:5423
 msgid "Eject from MMU"
 msgstr "Løs ut fra MMU"
@@ -1090,7 +1090,7 @@ msgstr "Laster farge"
 #. MSG_LOADING_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:3606 ../../Firmware/messages.cpp:57
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/mmu2_reporting.cpp:327 ../../Firmware/ultralcd.cpp:2205
+#: ../../Firmware/mmu2_reporting.cpp:326 ../../Firmware/ultralcd.cpp:2205
 #: ../../Firmware/ultralcd.cpp:3798
 msgid "Loading filament"
 msgstr "Laster filament"
@@ -1128,7 +1128,7 @@ msgid "MMU NOT RESPONDING"
 msgstr "MMU SVARER IKKE"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2_reporting.cpp:331
+#: ../../Firmware/mmu2_reporting.cpp:330
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU Retry: gjenoppretter temperatur..."
 
@@ -2144,7 +2144,7 @@ msgid "Temperatures"
 msgstr "Temperaturer"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:323
+#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:322
 msgid "Testing filament"
 msgstr "Tester filament"
 
@@ -2462,13 +2462,6 @@ msgstr "ukjent"
 msgid "unknown state"
 msgstr "ukjent tilstand"
 
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:335
-#: ../../Firmware/mmu2_error_converter.cpp:175
-msgid "⏬"
-msgstr "⏬"
-
 #. MSG_REFRESH c=18
 #: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:5938
 #: ../../Firmware/ultralcd.cpp:5941
@@ -2547,6 +2540,9 @@ msgstr ""
 "MMU-enhetens fastvareversjon er inkompatibel med skriverens FW. Oppdatering "
 "til versjon 2.1.9."
 
+#~ msgid "⏬"
+#~ msgstr "⏬"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"
 
diff --git a/lang/po/Firmware_pl.po b/lang/po/Firmware_pl.po
index 1007ad1bf..2f72f9d26 100644
--- a/lang/po/Firmware_pl.po
+++ b/lang/po/Firmware_pl.po
@@ -405,7 +405,7 @@ msgstr ""
 "trybie Normalnym"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:315
+#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:314
 #: ../../Firmware/ultralcd.cpp:5002 ../../Firmware/ultralcd.cpp:5426
 msgid "Cut filament"
 msgstr "Ciecie filamentu"
@@ -503,7 +503,7 @@ msgid "ERROR:"
 msgstr "BLAD:"
 
 #. MSG_EJECT_FROM_MMU c=16
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:319
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:318
 #: ../../Firmware/ultralcd.cpp:4984 ../../Firmware/ultralcd.cpp:5423
 msgid "Eject from MMU"
 msgstr "Wysun z MMU"
@@ -1096,7 +1096,7 @@ msgstr "Czyszcz. koloru"
 #. MSG_LOADING_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:3606 ../../Firmware/messages.cpp:57
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/mmu2_reporting.cpp:327 ../../Firmware/ultralcd.cpp:2205
+#: ../../Firmware/mmu2_reporting.cpp:326 ../../Firmware/ultralcd.cpp:2205
 #: ../../Firmware/ultralcd.cpp:3798
 msgid "Loading filament"
 msgstr "Laduje filament"
@@ -1134,7 +1134,7 @@ msgid "MMU NOT RESPONDING"
 msgstr "MMU NIE ODPOWIADA"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2_reporting.cpp:331
+#: ../../Firmware/mmu2_reporting.cpp:330
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU wznaw. Nagrzewanie..."
 
@@ -2157,7 +2157,7 @@ msgid "Temperatures"
 msgstr "Temperatury"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:323
+#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:322
 msgid "Testing filament"
 msgstr "Test filamentu"
 
@@ -2481,13 +2481,6 @@ msgstr "nieznane"
 msgid "unknown state"
 msgstr "Stan nieznany"
 
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:335
-#: ../../Firmware/mmu2_error_converter.cpp:175
-msgid "⏬"
-msgstr "⏬"
-
 #. MSG_REFRESH c=18
 #: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:5938
 #: ../../Firmware/ultralcd.cpp:5941
@@ -2566,6 +2559,9 @@ msgstr ""
 "Wersja oprogramowania układowego modułu MMU jest niezgodna z oprogramowaniem"
 " sprzętowym drukarki. Zaktualizuj do wersji 2.1.9."
 
+#~ msgid "⏬"
+#~ msgstr "⏬"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"
 
diff --git a/lang/po/Firmware_ro.po b/lang/po/Firmware_ro.po
index a9dac07ce..6d1a9d5b7 100644
--- a/lang/po/Firmware_ro.po
+++ b/lang/po/Firmware_ro.po
@@ -406,7 +406,7 @@ msgstr ""
 "doar in modul normal"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:315
+#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:314
 #: ../../Firmware/ultralcd.cpp:5002 ../../Firmware/ultralcd.cpp:5426
 msgid "Cut filament"
 msgstr "Taie filamentul"
@@ -504,7 +504,7 @@ msgid "ERROR:"
 msgstr "EROARE:"
 
 #. MSG_EJECT_FROM_MMU c=16
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:319
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:318
 #: ../../Firmware/ultralcd.cpp:4984 ../../Firmware/ultralcd.cpp:5423
 msgid "Eject from MMU"
 msgstr "Scoateți din MMU"
@@ -1097,7 +1097,7 @@ msgstr "Incarcare culoare"
 #. MSG_LOADING_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:3606 ../../Firmware/messages.cpp:57
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/mmu2_reporting.cpp:327 ../../Firmware/ultralcd.cpp:2205
+#: ../../Firmware/mmu2_reporting.cpp:326 ../../Firmware/ultralcd.cpp:2205
 #: ../../Firmware/ultralcd.cpp:3798
 msgid "Loading filament"
 msgstr "Incarcare filament"
@@ -1135,7 +1135,7 @@ msgid "MMU NOT RESPONDING"
 msgstr "MMU NU RASPUNDE"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2_reporting.cpp:331
+#: ../../Firmware/mmu2_reporting.cpp:330
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU: Restabilirea temperaturii..."
 
@@ -2160,7 +2160,7 @@ msgid "Temperatures"
 msgstr "Temperaturi"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:323
+#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:322
 msgid "Testing filament"
 msgstr "Testare filament"
 
@@ -2485,13 +2485,6 @@ msgstr "necunoscut"
 msgid "unknown state"
 msgstr "vers. necunoscuta"
 
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:335
-#: ../../Firmware/mmu2_error_converter.cpp:175
-msgid "⏬"
-msgstr "⏬"
-
 #. MSG_REFRESH c=18
 #: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:5938
 #: ../../Firmware/ultralcd.cpp:5941
@@ -2571,6 +2564,9 @@ msgstr ""
 "Versiunea de firmware a unității MMU este incompatibilă cu FW-ul "
 "imprimantei. Actualizați la versiunea 2.1.9."
 
+#~ msgid "⏬"
+#~ msgstr "⏬"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"
 
diff --git a/lang/po/Firmware_sk.po b/lang/po/Firmware_sk.po
index 13800d4c7..37cbe1636 100644
--- a/lang/po/Firmware_sk.po
+++ b/lang/po/Firmware_sk.po
@@ -403,7 +403,7 @@ msgstr ""
 "Normalnom rezime"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:315
+#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:314
 #: ../../Firmware/ultralcd.cpp:5002 ../../Firmware/ultralcd.cpp:5426
 msgid "Cut filament"
 msgstr "Odstrihnut filam."
@@ -501,7 +501,7 @@ msgid "ERROR:"
 msgstr "ERROR:"
 
 #. MSG_EJECT_FROM_MMU c=16
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:319
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:318
 #: ../../Firmware/ultralcd.cpp:4984 ../../Firmware/ultralcd.cpp:5423
 msgid "Eject from MMU"
 msgstr "Vysunúť z MMU"
@@ -1092,7 +1092,7 @@ msgstr "Cistenie farby"
 #. MSG_LOADING_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:3606 ../../Firmware/messages.cpp:57
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/mmu2_reporting.cpp:327 ../../Firmware/ultralcd.cpp:2205
+#: ../../Firmware/mmu2_reporting.cpp:326 ../../Firmware/ultralcd.cpp:2205
 #: ../../Firmware/ultralcd.cpp:3798
 msgid "Loading filament"
 msgstr "Zavedenie filamentu"
@@ -1130,7 +1130,7 @@ msgid "MMU NOT RESPONDING"
 msgstr "MMU NOT RESPONDING"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2_reporting.cpp:331
+#: ../../Firmware/mmu2_reporting.cpp:330
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU: Obnovenie teploty..."
 
@@ -2150,7 +2150,7 @@ msgid "Temperatures"
 msgstr "Teploty"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:323
+#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:322
 msgid "Testing filament"
 msgstr "Kontrola filamentu"
 
@@ -2469,13 +2469,6 @@ msgstr "neznamy"
 msgid "unknown state"
 msgstr "neznamy stav"
 
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:335
-#: ../../Firmware/mmu2_error_converter.cpp:175
-msgid "⏬"
-msgstr "⏬"
-
 #. MSG_REFRESH c=18
 #: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:5938
 #: ../../Firmware/ultralcd.cpp:5941
@@ -2554,6 +2547,9 @@ msgstr ""
 "Verzia firmvéru jednotky MMU nekompatibilná s FW tlačiarne. Aktualizácia na "
 "verziu 2.1.9."
 
+#~ msgid "⏬"
+#~ msgstr "⏬"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"
 
diff --git a/lang/po/Firmware_sv.po b/lang/po/Firmware_sv.po
index 6b75e97a1..fbf222498 100644
--- a/lang/po/Firmware_sv.po
+++ b/lang/po/Firmware_sv.po
@@ -404,7 +404,7 @@ msgstr ""
 "normalt läge"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:315
+#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:314
 #: ../../Firmware/ultralcd.cpp:5002 ../../Firmware/ultralcd.cpp:5426
 msgid "Cut filament"
 msgstr "Skär filament"
@@ -502,7 +502,7 @@ msgid "ERROR:"
 msgstr "FEL:"
 
 #. MSG_EJECT_FROM_MMU c=16
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:319
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:318
 #: ../../Firmware/ultralcd.cpp:4984 ../../Firmware/ultralcd.cpp:5423
 msgid "Eject from MMU"
 msgstr "Utmat från MMU"
@@ -1095,7 +1095,7 @@ msgstr "Laddar färg"
 #. MSG_LOADING_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:3606 ../../Firmware/messages.cpp:57
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/mmu2_reporting.cpp:327 ../../Firmware/ultralcd.cpp:2205
+#: ../../Firmware/mmu2_reporting.cpp:326 ../../Firmware/ultralcd.cpp:2205
 #: ../../Firmware/ultralcd.cpp:3798
 msgid "Loading filament"
 msgstr "Laddar filament"
@@ -1133,7 +1133,7 @@ msgid "MMU NOT RESPONDING"
 msgstr "MMU SVARAR INTE"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2_reporting.cpp:331
+#: ../../Firmware/mmu2_reporting.cpp:330
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU försök igen: Återställer temperatur..."
 
@@ -2157,7 +2157,7 @@ msgid "Temperatures"
 msgstr "Temperaturer"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:323
+#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:322
 msgid "Testing filament"
 msgstr "Testar filament"
 
@@ -2475,13 +2475,6 @@ msgstr "okänd"
 msgid "unknown state"
 msgstr "okänt stat"
 
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:335
-#: ../../Firmware/mmu2_error_converter.cpp:175
-msgid "⏬"
-msgstr "⏬"
-
 #. MSG_REFRESH c=18
 #: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:5938
 #: ../../Firmware/ultralcd.cpp:5941
@@ -2560,6 +2553,9 @@ msgstr ""
 "MMU-enhetens firmwareversion är inkompatibel med skrivarens FW. Uppdatering "
 "till version 2.1.9."
 
+#~ msgid "⏬"
+#~ msgstr "⏬"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"