josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #37 from PavelSindler/MK2 

Added flag for printer reset detection for SNMM, improved loading and unloading filament, corrected messages in Italian language, changed load filament sequence
This commit is contained in:
PavelSindler 2017-01-25 19:20:27 +01:00 committed by GitHub
parent 649928e994 cc30f910eb
commit 2f885290e2
13 changed files with 196 additions and 148 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Firmware/Configuration.h
View File

@ -43,7 +43,7 @@
#define EEPROM_BED_CORRECTION_FRONT (EEPROM_BED_CORRECTION_RIGHT-1) #define EEPROM_BED_CORRECTION_FRONT (EEPROM_BED_CORRECTION_RIGHT-1)
#define EEPROM_BED_CORRECTION_REAR (EEPROM_BED_CORRECTION_FRONT-1) #define EEPROM_BED_CORRECTION_REAR (EEPROM_BED_CORRECTION_FRONT-1)
#define EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY (EEPROM_BED_CORRECTION_REAR-1) #define EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY (EEPROM_BED_CORRECTION_REAR-1)
#define EEPROM_STEPS_PER_UNIT_E (EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY-4) #define EEPROM_PRINT_FLAG (EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY-1)
// Currently running firmware, each digit stored as uint16_t. // Currently running firmware, each digit stored as uint16_t.
// The flavor differentiates a dev, alpha, beta, release candidate or a release version. // The flavor differentiates a dev, alpha, beta, release candidate or a release version.

8
Firmware/ConfigurationStore.cpp
View File

@ -120,6 +120,10 @@ void Config_StoreSettings()
#endif #endif
#endif #endif
/*MYSERIAL.print("Top address used:\n");
MYSERIAL.print(i);
MYSERIAL.print("\n");
*/
char ver2[4]=EEPROM_VERSION; char ver2[4]=EEPROM_VERSION;
i=EEPROM_OFFSET; i=EEPROM_OFFSET;
EEPROM_WRITE_VAR(i,ver2); // validate data EEPROM_WRITE_VAR(i,ver2); // validate data
@ -271,8 +275,8 @@ void Config_RetrieveSettings()
EEPROM_READ_VAR(i,minsegmenttime); EEPROM_READ_VAR(i,minsegmenttime);
EEPROM_READ_VAR(i,max_jerk[X_AXIS]); EEPROM_READ_VAR(i,max_jerk[X_AXIS]);
EEPROM_READ_VAR(i,max_jerk[Y_AXIS]); EEPROM_READ_VAR(i,max_jerk[Y_AXIS]);
EEPROM_READ_VAR(i,max_jerk[Z_AXIS]); EEPROM_READ_VAR(i,max_jerk[Z_AXIS]);
EEPROM_READ_VAR(i,max_jerk[E_AXIS]); EEPROM_READ_VAR(i,max_jerk[E_AXIS]);
EEPROM_READ_VAR(i,add_homing); EEPROM_READ_VAR(i,add_homing);
#ifndef ULTIPANEL #ifndef ULTIPANEL
int plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed; int plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed;

1
Firmware/Marlin.h
View File

@ -284,6 +284,7 @@ extern unsigned long starttime;
extern unsigned long stoptime; extern unsigned long stoptime;
extern bool is_usb_printing; extern bool is_usb_printing;
extern bool homing_flag; extern bool homing_flag;
extern bool loading_flag;
extern unsigned int usb_printing_counter; extern unsigned int usb_printing_counter;
extern unsigned long kicktime; extern unsigned long kicktime;

64
Firmware/Marlin_main.cpp
View File

@ -272,6 +272,7 @@ unsigned long total_filament_used;
unsigned int heating_status; unsigned int heating_status;
unsigned int heating_status_counter; unsigned int heating_status_counter;
bool custom_message; bool custom_message;
bool loading_flag = false;
unsigned int custom_message_type; unsigned int custom_message_type;
unsigned int custom_message_state; unsigned int custom_message_state;
@ -2051,6 +2052,18 @@ void process_commands()
#endif #endif
} }
else if (code_seen("SetF")) {
#ifdef SNMM
bool not_finished = (eeprom_read_byte((unsigned char*)EEPROM_PRINT_FLAG) != PRINT_FINISHED);
eeprom_update_byte((unsigned char*)EEPROM_PRINT_FLAG, PRINT_STARTED);
if (not_finished) enquecommand_front_P(PSTR("PRUSA Y"));
#endif
}
else if (code_seen("ResF")) {
#ifdef SNMM
eeprom_update_byte((unsigned char*)EEPROM_PRINT_FLAG, PRINT_FINISHED);
#endif
}
//else if (code_seen('Cal')) { //else if (code_seen('Cal')) {
// lcd_calibration(); // lcd_calibration();
// } // }
@ -5050,6 +5063,57 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
#endif #endif
} }
break; break;
case 701: //M701: load filament
{
enable_z();
custom_message = true;
custom_message_type = 2;
lcd_setstatuspgm(MSG_LOADING_FILAMENT);
current_position[E_AXIS] += 65;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 400 / 60, active_extruder); //fast sequence
current_position[E_AXIS] += 40;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 100 / 60, active_extruder); //slow sequence
st_synchronize();
if (!farm_mode && loading_flag) {
bool clean = lcd_show_fullscreen_message_yes_no_and_wait_P(MSG_FILAMENT_CLEAN, false, true);
while (!clean) {
lcd_update_enable(true);
lcd_update(2);
current_position[E_AXIS] += 40;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 100 / 60, active_extruder); //slow sequence
st_synchronize();
clean = lcd_show_fullscreen_message_yes_no_and_wait_P(MSG_FILAMENT_CLEAN, false, true);
}
}
lcd_update_enable(true);
lcd_update(2);
lcd_setstatuspgm(WELCOME_MSG);
disable_z();
loading_flag = false;
custom_message = false;
custom_message_type = 0;
}
break;
case 702:
{
custom_message = true;
custom_message_type = 2;
lcd_setstatuspgm(MSG_UNLOADING_FILAMENT); //need to be tranlated to spanish language
current_position[E_AXIS] -= 80;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 7000 / 60, active_extruder);
st_synchronize();
lcd_setstatuspgm(WELCOME_MSG);
custom_message = false;
custom_message_type = 0;
}
break;
case 999: // M999: Restart after being stopped case 999: // M999: Restart after being stopped
Stopped = false; Stopped = false;
lcd_reset_alert_level(); lcd_reset_alert_level();

44
Firmware/language_all.cpp
View File

@ -197,7 +197,7 @@ const char * const MSG_BED_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_BED_HEATING_EN[] PROGMEM = "Bed Heating"; const char MSG_BED_HEATING_EN[] PROGMEM = "Bed Heating";
const char MSG_BED_HEATING_CZ[] PROGMEM = "Zahrivani bed"; const char MSG_BED_HEATING_CZ[] PROGMEM = "Zahrivani bed";
const char MSG_BED_HEATING_IT[] PROGMEM = "Piatto riscaldam."; const char MSG_BED_HEATING_IT[] PROGMEM = "Riscald. letto";
const char MSG_BED_HEATING_ES[] PROGMEM = "Base Calentando"; const char MSG_BED_HEATING_ES[] PROGMEM = "Base Calentando";
const char MSG_BED_HEATING_PL[] PROGMEM = "Grzanie stolika.."; const char MSG_BED_HEATING_PL[] PROGMEM = "Grzanie stolika..";
const char * const MSG_BED_HEATING_LANG_TABLE[LANG_NUM] PROGMEM = { const char * const MSG_BED_HEATING_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -465,7 +465,7 @@ const char * const MSG_CHANGE_EXTR_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_CHANGE_SUCCESS_EN[] PROGMEM = "Change success!"; const char MSG_CHANGE_SUCCESS_EN[] PROGMEM = "Change success!";
const char MSG_CHANGE_SUCCESS_CZ[] PROGMEM = "Zmena uspesna!"; const char MSG_CHANGE_SUCCESS_CZ[] PROGMEM = "Zmena uspesna!";
const char MSG_CHANGE_SUCCESS_IT[] PROGMEM = "Cambia. riuscito!"; const char MSG_CHANGE_SUCCESS_IT[] PROGMEM = "Cambio riuscito!";
const char MSG_CHANGE_SUCCESS_ES[] PROGMEM = "Cambiar bien!"; const char MSG_CHANGE_SUCCESS_ES[] PROGMEM = "Cambiar bien!";
const char MSG_CHANGE_SUCCESS_PL[] PROGMEM = "Wymiana ok!"; const char MSG_CHANGE_SUCCESS_PL[] PROGMEM = "Wymiana ok!";
const char * const MSG_CHANGE_SUCCESS_LANG_TABLE[LANG_NUM] PROGMEM = { const char * const MSG_CHANGE_SUCCESS_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -478,7 +478,7 @@ const char * const MSG_CHANGE_SUCCESS_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_CHANGING_FILAMENT_EN[] PROGMEM = "Changing filament!"; const char MSG_CHANGING_FILAMENT_EN[] PROGMEM = "Changing filament!";
const char MSG_CHANGING_FILAMENT_CZ[] PROGMEM = "Vymena filamentu!"; const char MSG_CHANGING_FILAMENT_CZ[] PROGMEM = "Vymena filamentu!";
const char MSG_CHANGING_FILAMENT_IT[] PROGMEM = "Mutevole fil.!"; const char MSG_CHANGING_FILAMENT_IT[] PROGMEM = "Cambiando filam.";
const char MSG_CHANGING_FILAMENT_ES[] PROGMEM = "Cambiando fil.!"; const char MSG_CHANGING_FILAMENT_ES[] PROGMEM = "Cambiando fil.!";
const char MSG_CHANGING_FILAMENT_PL[] PROGMEM = "Wymiana filamentu"; const char MSG_CHANGING_FILAMENT_PL[] PROGMEM = "Wymiana filamentu";
const char * const MSG_CHANGING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = { const char * const MSG_CHANGING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -633,11 +633,12 @@ const char * const MSG_END_FILE_LIST_LANG_TABLE[1] PROGMEM = {
const char MSG_ERROR_EN[] PROGMEM = "ERROR:"; const char MSG_ERROR_EN[] PROGMEM = "ERROR:";
const char MSG_ERROR_CZ[] PROGMEM = "CHYBA:"; const char MSG_ERROR_CZ[] PROGMEM = "CHYBA:";
const char MSG_ERROR_IT[] PROGMEM = "ERRORE:";
const char MSG_ERROR_PL[] PROGMEM = "BLAD:"; const char MSG_ERROR_PL[] PROGMEM = "BLAD:";
const char * const MSG_ERROR_LANG_TABLE[LANG_NUM] PROGMEM = { const char * const MSG_ERROR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_ERROR_EN, MSG_ERROR_EN,
MSG_ERROR_CZ, MSG_ERROR_CZ,
MSG_ERROR_EN, MSG_ERROR_IT,
MSG_ERROR_EN, MSG_ERROR_EN,
MSG_ERROR_PL MSG_ERROR_PL
}; };
@ -947,7 +948,7 @@ const char * const MSG_HEATING_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_HEATING_COMPLETE_EN[] PROGMEM = "Heating done."; const char MSG_HEATING_COMPLETE_EN[] PROGMEM = "Heating done.";
const char MSG_HEATING_COMPLETE_CZ[] PROGMEM = "Zahrivani OK."; const char MSG_HEATING_COMPLETE_CZ[] PROGMEM = "Zahrivani OK.";
const char MSG_HEATING_COMPLETE_IT[] PROGMEM = "Riscaldamento fatto."; const char MSG_HEATING_COMPLETE_IT[] PROGMEM = "Riscald. completo";
const char MSG_HEATING_COMPLETE_ES[] PROGMEM = "Calentando listo."; const char MSG_HEATING_COMPLETE_ES[] PROGMEM = "Calentando listo.";
const char MSG_HEATING_COMPLETE_PL[] PROGMEM = "Grzanie OK."; const char MSG_HEATING_COMPLETE_PL[] PROGMEM = "Grzanie OK.";
const char * const MSG_HEATING_COMPLETE_LANG_TABLE[LANG_NUM] PROGMEM = { const char * const MSG_HEATING_COMPLETE_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1090,7 +1091,7 @@ const char * const MSG_LANGUAGE_SELECT_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_LOADING_COLOR_EN[] PROGMEM = "Loading color"; const char MSG_LOADING_COLOR_EN[] PROGMEM = "Loading color";
const char MSG_LOADING_COLOR_CZ[] PROGMEM = "Cisteni barvy"; const char MSG_LOADING_COLOR_CZ[] PROGMEM = "Cisteni barvy";
const char MSG_LOADING_COLOR_IT[] PROGMEM = "Cargando color"; const char MSG_LOADING_COLOR_IT[] PROGMEM = "Caricando colore";
const char MSG_LOADING_COLOR_ES[] PROGMEM = "Cargando color"; const char MSG_LOADING_COLOR_ES[] PROGMEM = "Cargando color";
const char MSG_LOADING_COLOR_PL[] PROGMEM = "Czyszcz. koloru"; const char MSG_LOADING_COLOR_PL[] PROGMEM = "Czyszcz. koloru";
const char * const MSG_LOADING_COLOR_LANG_TABLE[LANG_NUM] PROGMEM = { const char * const MSG_LOADING_COLOR_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1103,7 +1104,7 @@ const char * const MSG_LOADING_COLOR_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_LOADING_FILAMENT_EN[] PROGMEM = "Loading filament"; const char MSG_LOADING_FILAMENT_EN[] PROGMEM = "Loading filament";
const char MSG_LOADING_FILAMENT_CZ[] PROGMEM = "Zavadeni filamentu"; const char MSG_LOADING_FILAMENT_CZ[] PROGMEM = "Zavadeni filamentu";
const char MSG_LOADING_FILAMENT_IT[] PROGMEM = "Cargando fil."; const char MSG_LOADING_FILAMENT_IT[] PROGMEM = "Caricando filam.";
const char MSG_LOADING_FILAMENT_ES[] PROGMEM = "Cargando fil."; const char MSG_LOADING_FILAMENT_ES[] PROGMEM = "Cargando fil.";
const char MSG_LOADING_FILAMENT_PL[] PROGMEM = "Wprow. filamentu"; const char MSG_LOADING_FILAMENT_PL[] PROGMEM = "Wprow. filamentu";
const char * const MSG_LOADING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = { const char * const MSG_LOADING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1199,7 +1200,7 @@ const char * const MSG_MAIN_LANG_TABLE[LANG_NUM] PROGMEM = {
}; };
const char MSG_MARK_FIL_EN[] PROGMEM = "Mark filament 100mm from extruder body. Click when done."; const char MSG_MARK_FIL_EN[] PROGMEM = "Mark filament 100mm from extruder body. Click when done.";
const char MSG_MARK_FIL_CZ[] PROGMEM = "Oznacte filament 100 mm od tela extruderu. Potvrdte tlacitkem."; const char MSG_MARK_FIL_CZ[] PROGMEM = "Oznacte filament 100 mm od tela extruderu a po te potvrdte tlacitkem.";
const char MSG_MARK_FIL_IT[] PROGMEM = "Segnare il filamento a 100 mm di distanza dal corpo dell'estrusore. Click per continuare."; const char MSG_MARK_FIL_IT[] PROGMEM = "Segnare il filamento a 100 mm di distanza dal corpo dell'estrusore. Click per continuare.";
const char MSG_MARK_FIL_ES[] PROGMEM = "Marque el filamento 100 mm por encima del final del extrusor. Hacer clic una vez terminado."; const char MSG_MARK_FIL_ES[] PROGMEM = "Marque el filamento 100 mm por encima del final del extrusor. Hacer clic una vez terminado.";
const char MSG_MARK_FIL_PL[] PROGMEM = "Prosze oznaczyc filament 100 mm od ciala ekstrudera. Potwierdzic przyciskiem."; const char MSG_MARK_FIL_PL[] PROGMEM = "Prosze oznaczyc filament 100 mm od ciala ekstrudera. Potwierdzic przyciskiem.";
@ -1418,7 +1419,7 @@ const char * const MSG_NO_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_NOT_COLOR_EN[] PROGMEM = "Color not clear"; const char MSG_NOT_COLOR_EN[] PROGMEM = "Color not clear";
const char MSG_NOT_COLOR_CZ[] PROGMEM = "Barva neni cista"; const char MSG_NOT_COLOR_CZ[] PROGMEM = "Barva neni cista";
const char MSG_NOT_COLOR_IT[] PROGMEM = "Color no claro"; const char MSG_NOT_COLOR_IT[] PROGMEM = "Colore non puro";
const char MSG_NOT_COLOR_ES[] PROGMEM = "Color no claro"; const char MSG_NOT_COLOR_ES[] PROGMEM = "Color no claro";
const char MSG_NOT_COLOR_PL[] PROGMEM = "Kolor zanieczysz."; const char MSG_NOT_COLOR_PL[] PROGMEM = "Kolor zanieczysz.";
const char * const MSG_NOT_COLOR_LANG_TABLE[LANG_NUM] PROGMEM = { const char * const MSG_NOT_COLOR_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1431,7 +1432,7 @@ const char * const MSG_NOT_COLOR_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_NOT_LOADED_EN[] PROGMEM = "Filament not loaded"; const char MSG_NOT_LOADED_EN[] PROGMEM = "Filament not loaded";
const char MSG_NOT_LOADED_CZ[] PROGMEM = "Filament nezaveden"; const char MSG_NOT_LOADED_CZ[] PROGMEM = "Filament nezaveden";
const char MSG_NOT_LOADED_IT[] PROGMEM = "Fil. no cargado"; const char MSG_NOT_LOADED_IT[] PROGMEM = "Fil. non caricato";
const char MSG_NOT_LOADED_ES[] PROGMEM = "Fil. no cargado"; const char MSG_NOT_LOADED_ES[] PROGMEM = "Fil. no cargado";
const char MSG_NOT_LOADED_PL[] PROGMEM = "Brak filamentu"; const char MSG_NOT_LOADED_PL[] PROGMEM = "Brak filamentu";
const char * const MSG_NOT_LOADED_LANG_TABLE[LANG_NUM] PROGMEM = { const char * const MSG_NOT_LOADED_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1583,10 +1584,10 @@ const char * const MSG_PREHEAT_NOZZLE_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PREHEAT_NOZZLE_PL MSG_PREHEAT_NOZZLE_PL
}; };
const char MSG_PRESS_EN[] PROGMEM = "And press the knob"; const char MSG_PRESS_EN[] PROGMEM = "and press the knob";
const char MSG_PRESS_CZ[] PROGMEM = "A stisknete tlacitko"; const char MSG_PRESS_CZ[] PROGMEM = "a stisknete tlacitko";
const char MSG_PRESS_IT[] PROGMEM = "Y pulse el mando"; const char MSG_PRESS_IT[] PROGMEM = "e cliccare manopola";
const char MSG_PRESS_ES[] PROGMEM = "Y pulse el mando"; const char MSG_PRESS_ES[] PROGMEM = "y pulse el mando";
const char MSG_PRESS_PL[] PROGMEM = "Nacisnij przycisk"; const char MSG_PRESS_PL[] PROGMEM = "Nacisnij przycisk";
const char * const MSG_PRESS_LANG_TABLE[LANG_NUM] PROGMEM = { const char * const MSG_PRESS_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PRESS_EN, MSG_PRESS_EN,
@ -2161,7 +2162,7 @@ const char * const MSG_SHOW_END_STOPS_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_SILENT_MODE_OFF_EN[] PROGMEM = "Mode [high power]"; const char MSG_SILENT_MODE_OFF_EN[] PROGMEM = "Mode [high power]";
const char MSG_SILENT_MODE_OFF_CZ[] PROGMEM = "Mod [vys. vykon]"; const char MSG_SILENT_MODE_OFF_CZ[] PROGMEM = "Mod [vys. vykon]";
const char MSG_SILENT_MODE_OFF_IT[] PROGMEM = "Mode [prestante]"; const char MSG_SILENT_MODE_OFF_IT[] PROGMEM = "Mode [forte]";
const char MSG_SILENT_MODE_OFF_ES[] PROGMEM = "Modo [mas fuerza]"; const char MSG_SILENT_MODE_OFF_ES[] PROGMEM = "Modo [mas fuerza]";
const char MSG_SILENT_MODE_OFF_PL[] PROGMEM = "Mod [w wydajnosc]"; const char MSG_SILENT_MODE_OFF_PL[] PROGMEM = "Mod [w wydajnosc]";
const char * const MSG_SILENT_MODE_OFF_LANG_TABLE[LANG_NUM] PROGMEM = { const char * const MSG_SILENT_MODE_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -2404,6 +2405,19 @@ const char * const MSG_UNKNOWN_COMMAND_LANG_TABLE[1] PROGMEM = {
MSG_UNKNOWN_COMMAND_EN MSG_UNKNOWN_COMMAND_EN
}; };
const char MSG_UNLOADING_FILAMENT_EN[] PROGMEM = "Unloading filament";
const char MSG_UNLOADING_FILAMENT_CZ[] PROGMEM = "Vysouvam filament";
const char MSG_UNLOADING_FILAMENT_IT[] PROGMEM = "Rilasc. filamento";
const char MSG_UNLOADING_FILAMENT_ES[] PROGMEM = "Soltando filamento";
const char MSG_UNLOADING_FILAMENT_PL[] PROGMEM = "Wysuwam filament";
const char * const MSG_UNLOADING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_UNLOADING_FILAMENT_EN,
MSG_UNLOADING_FILAMENT_CZ,
MSG_UNLOADING_FILAMENT_IT,
MSG_UNLOADING_FILAMENT_ES,
MSG_UNLOADING_FILAMENT_PL
};
const char MSG_UNLOAD_FILAMENT_EN[] PROGMEM = "Unload filament"; const char MSG_UNLOAD_FILAMENT_EN[] PROGMEM = "Unload filament";
const char MSG_UNLOAD_FILAMENT_CZ[] PROGMEM = "Vyjmout filament"; const char MSG_UNLOAD_FILAMENT_CZ[] PROGMEM = "Vyjmout filament";
const char MSG_UNLOAD_FILAMENT_IT[] PROGMEM = "Scarica filamento"; const char MSG_UNLOAD_FILAMENT_IT[] PROGMEM = "Scarica filamento";

2
Firmware/language_all.h
View File

@ -518,6 +518,8 @@ extern const char* const MSG_TUNE_LANG_TABLE[LANG_NUM];
#define MSG_TUNE LANG_TABLE_SELECT(MSG_TUNE_LANG_TABLE) #define MSG_TUNE LANG_TABLE_SELECT(MSG_TUNE_LANG_TABLE)
extern const char* const MSG_UNKNOWN_COMMAND_LANG_TABLE[1]; extern const char* const MSG_UNKNOWN_COMMAND_LANG_TABLE[1];
#define MSG_UNKNOWN_COMMAND LANG_TABLE_SELECT_EXPLICIT(MSG_UNKNOWN_COMMAND_LANG_TABLE, 0) #define MSG_UNKNOWN_COMMAND LANG_TABLE_SELECT_EXPLICIT(MSG_UNKNOWN_COMMAND_LANG_TABLE, 0)
extern const char* const MSG_UNLOADING_FILAMENT_LANG_TABLE[LANG_NUM];
#define MSG_UNLOADING_FILAMENT LANG_TABLE_SELECT(MSG_UNLOADING_FILAMENT_LANG_TABLE)
extern const char* const MSG_UNLOAD_FILAMENT_LANG_TABLE[LANG_NUM]; extern const char* const MSG_UNLOAD_FILAMENT_LANG_TABLE[LANG_NUM];
#define MSG_UNLOAD_FILAMENT LANG_TABLE_SELECT(MSG_UNLOAD_FILAMENT_LANG_TABLE) #define MSG_UNLOAD_FILAMENT LANG_TABLE_SELECT(MSG_UNLOAD_FILAMENT_LANG_TABLE)
extern const char* const MSG_USB_PRINTING_LANG_TABLE[LANG_NUM]; extern const char* const MSG_USB_PRINTING_LANG_TABLE[LANG_NUM];

5
Firmware/language_cz.h
View File

@ -88,7 +88,7 @@
#define MSG_PLEASE_WAIT "Prosim cekejte" #define MSG_PLEASE_WAIT "Prosim cekejte"
#define MSG_LOADING_COLOR "Cisteni barvy" #define MSG_LOADING_COLOR "Cisteni barvy"
#define MSG_CHANGE_SUCCESS "Zmena uspesna!" #define MSG_CHANGE_SUCCESS "Zmena uspesna!"
#define MSG_PRESS "A stisknete tlacitko" #define MSG_PRESS "a stisknete tlacitko"
#define MSG_INSERT_FILAMENT "Vlozte filament" #define MSG_INSERT_FILAMENT "Vlozte filament"
#define MSG_CHANGING_FILAMENT "Vymena filamentu!" #define MSG_CHANGING_FILAMENT "Vymena filamentu!"
@ -258,7 +258,8 @@
#define MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filamenty jsou srovnany. Pro uspesnou kalibraci prosim ocistete trysku. Po te potvrdte tlacitkem." #define MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filamenty jsou srovnany. Pro uspesnou kalibraci prosim ocistete trysku. Po te potvrdte tlacitkem."
#define MSG_CALIBRATE_E "Kalibrovat E" #define MSG_CALIBRATE_E "Kalibrovat E"
#define MSG_E_CAL_KNOB "Otacejte tlacitkem dokud znacka nedosahne tela extruderu. Potvrdte tlacitkem." #define MSG_E_CAL_KNOB "Otacejte tlacitkem dokud znacka nedosahne tela extruderu. Potvrdte tlacitkem."
#define MSG_MARK_FIL "Oznacte filament 100 mm od tela extruderu. Potvrdte tlacitkem." #define MSG_MARK_FIL "Oznacte filament 100 mm od tela extruderu a po te potvrdte tlacitkem."
#define MSG_CLEAN_NOZZLE_E "E kalibrace ukoncena. Prosim ocistete trysku. Po te potvrdte tlacitkem." #define MSG_CLEAN_NOZZLE_E "E kalibrace ukoncena. Prosim ocistete trysku. Po te potvrdte tlacitkem."
#define MSG_WAITING_TEMP "Cekani na zchladnuti trysky a podlozky." #define MSG_WAITING_TEMP "Cekani na zchladnuti trysky a podlozky."
#define MSG_FILAMENT_CLEAN "Je barva cista?" #define MSG_FILAMENT_CLEAN "Je barva cista?"
#define MSG_UNLOADING_FILAMENT "Vysouvam filament"

3
Firmware/language_en.h
View File

@ -85,7 +85,7 @@
#define(length=20) MSG_PLEASE_WAIT "Please wait" #define(length=20) MSG_PLEASE_WAIT "Please wait"
#define MSG_LOADING_COLOR "Loading color" #define MSG_LOADING_COLOR "Loading color"
#define MSG_CHANGE_SUCCESS "Change success!" #define MSG_CHANGE_SUCCESS "Change success!"
#define(length=20) MSG_PRESS "And press the knob" #define(length=20) MSG_PRESS "and press the knob"
#define(length=20) MSG_INSERT_FILAMENT "Insert filament" #define(length=20) MSG_INSERT_FILAMENT "Insert filament"
#define(length=20) MSG_CHANGING_FILAMENT "Changing filament!" #define(length=20) MSG_CHANGING_FILAMENT "Changing filament!"
@ -250,6 +250,7 @@
#define(length=20, lines=8) MSG_CLEAN_NOZZLE_E "E calibration finished. Please clean the nozzle. Click when done." #define(length=20, lines=8) MSG_CLEAN_NOZZLE_E "E calibration finished. Please clean the nozzle. Click when done."
#define(length=20, lines=3) MSG_WAITING_TEMP "Waiting for heater and bed cooling" #define(length=20, lines=3) MSG_WAITING_TEMP "Waiting for heater and bed cooling"
#define(length=20, lines=2) MSG_FILAMENT_CLEAN "Is color clear?" #define(length=20, lines=2) MSG_FILAMENT_CLEAN "Is color clear?"
#define(lenght=20, lines=1) MSG_UNLOADING_FILAMENT "Unloading filament"
#define MSG_BED_CORRECTION_MENU "Bed level correct" #define MSG_BED_CORRECTION_MENU "Bed level correct"
#define MSG_BED_CORRECTION_LEFT "Left side um" #define MSG_BED_CORRECTION_LEFT "Left side um"

3
Firmware/language_es.h
View File

@ -59,7 +59,7 @@
#define MSG_PLEASE_WAIT "Espera" #define MSG_PLEASE_WAIT "Espera"
#define MSG_LOADING_COLOR "Cargando color" #define MSG_LOADING_COLOR "Cargando color"
#define MSG_CHANGE_SUCCESS "Cambiar bien!" #define MSG_CHANGE_SUCCESS "Cambiar bien!"
#define MSG_PRESS "Y pulse el mando" #define MSG_PRESS "y pulse el mando"
#define MSG_INSERT_FILAMENT "Inserta filamento" #define MSG_INSERT_FILAMENT "Inserta filamento"
#define MSG_CHANGING_FILAMENT "Cambiando fil.!" #define MSG_CHANGING_FILAMENT "Cambiando fil.!"
#define MSG_SILENT_MODE_ON "Modo [silencio]" #define MSG_SILENT_MODE_ON "Modo [silencio]"
@ -252,3 +252,4 @@
#define MSG_CLEAN_NOZZLE_E "E calibrado. Limpiar la boquilla. Haga clic una vez terminado." #define MSG_CLEAN_NOZZLE_E "E calibrado. Limpiar la boquilla. Haga clic una vez terminado."
#define MSG_WAITING_TEMP "Esperando enfriamiento de la cama y del extrusor." #define MSG_WAITING_TEMP "Esperando enfriamiento de la cama y del extrusor."
#define MSG_FILAMENT_CLEAN "Es el nuevo color nitido?" #define MSG_FILAMENT_CLEAN "Es el nuevo color nitido?"
#define MSG_UNLOADING_FILAMENT "Soltando filamento"

23
Firmware/language_it.h
View File

@ -64,27 +64,27 @@
#define MSG_SUPPORT "Support" #define MSG_SUPPORT "Support"
#define MSG_YES "Si" #define MSG_YES "Si"
#define MSG_NO "No" #define MSG_NO "No"
#define MSG_NOT_LOADED "Fil. no cargado" #define MSG_NOT_LOADED "Fil. non caricato"
#define MSG_NOT_COLOR "Color no claro" #define MSG_NOT_COLOR "Colore non puro"
#define MSG_LOADING_COLOR "Cargando color" #define MSG_LOADING_COLOR "Caricando colore"
#define MSG_CHANGE_SUCCESS "Cambia. riuscito!" #define MSG_CHANGE_SUCCESS "Cambio riuscito!"
#define MSG_PRESS "Y pulse el mando" #define MSG_PRESS "e cliccare manopola"
#define MSG_INSERT_FILAMENT "Inserire filamento" #define MSG_INSERT_FILAMENT "Inserire filamento"
#define MSG_CHANGING_FILAMENT "Mutevole fil.!" #define MSG_CHANGING_FILAMENT "Cambiando filam."
#define MSG_PLEASE_WAIT "Aspetta" #define MSG_PLEASE_WAIT "Aspetta"
#define MSG_PREHEAT_NOZZLE "Preris. ugello!" #define MSG_PREHEAT_NOZZLE "Preris. ugello!"
#define MSG_HEATING_COMPLETE "Riscaldamento fatto." #define MSG_HEATING_COMPLETE "Riscald. completo"
#define MSG_BED_HEATING "Piatto riscaldam." #define MSG_BED_HEATING "Riscald. letto"
#define MSG_BED_DONE "Piatto fatto." #define MSG_BED_DONE "Piatto fatto."
#define MSG_ERROR "ERROR:" #define MSG_ERROR "ERRORE:"
#define MSG_CORRECTLY "Cambiato corr.?" #define MSG_CORRECTLY "Cambiato corr.?"
#define MSG_LOADING_FILAMENT "Cargando fil." #define MSG_LOADING_FILAMENT "Caricando filam."
#define MSG_UNLOAD_FILAMENT "Scarica filamento" #define MSG_UNLOAD_FILAMENT "Scarica filamento"
#define MSG_LOAD_FILAMENT "Carica filamento" #define MSG_LOAD_FILAMENT "Carica filamento"
#define MSG_SILENT_MODE_ON "Modo [silenzioso]" #define MSG_SILENT_MODE_ON "Modo [silenzioso]"
#define MSG_SILENT_MODE_OFF "Mode [prestante]" #define MSG_SILENT_MODE_OFF "Mode [forte]"
#define MSG_REBOOT "Riavvia stampante" #define MSG_REBOOT "Riavvia stampante"
#define MSG_TAKE_EFFECT " per attualizzare" #define MSG_TAKE_EFFECT " per attualizzare"
@ -247,3 +247,4 @@
#define MSG_CLEAN_NOZZLE_E "Calibrazione E terminata. Si prega di pulire l'ugello. Click per continuare." #define MSG_CLEAN_NOZZLE_E "Calibrazione E terminata. Si prega di pulire l'ugello. Click per continuare."
#define MSG_WAITING_TEMP "In attesa del raffreddamento della testina e del piatto." #define MSG_WAITING_TEMP "In attesa del raffreddamento della testina e del piatto."
#define MSG_FILAMENT_CLEAN "Il colore e' nitido?" #define MSG_FILAMENT_CLEAN "Il colore e' nitido?"
#define MSG_UNLOADING_FILAMENT "Rilasc. filamento"

1
Firmware/language_pl.h
View File

@ -258,3 +258,4 @@
#define MSG_CLEAN_NOZZLE_E "Kalibracja E skonczona. Prosze oczyscic dysze. Potem potwierdzic przyciskiem. " #define MSG_CLEAN_NOZZLE_E "Kalibracja E skonczona. Prosze oczyscic dysze. Potem potwierdzic przyciskiem. "
#define MSG_WAITING_TEMP "Oczekiwanie na wychlodzenie dyszy i podkladki." #define MSG_WAITING_TEMP "Oczekiwanie na wychlodzenie dyszy i podkladki."
#define MSG_FILAMENT_CLEAN "Czy kolor jest czysty?" #define MSG_FILAMENT_CLEAN "Czy kolor jest czysty?"
#define MSG_UNLOADING_FILAMENT "Wysuwam filament"

172
Firmware/ultralcd.cpp
View File

@ -497,62 +497,6 @@ static void lcd_status_screen()
void lcd_commands() void lcd_commands()
{ {
if (lcd_commands_type == LCD_COMMAND_LOAD_FILAMENT) //// load filament sequence
{
if (lcd_commands_step == 0) { lcd_commands_step = 7; custom_message = true;}
if (lcd_commands_step == 1 && !blocks_queued())
{
lcd_commands_step = 0;
lcd_commands_type = 0;
lcd_setstatuspgm(WELCOME_MSG);
disable_z();
custom_message = false;
custom_message_type = 0;
}
if (lcd_commands_step == 2 && !blocks_queued())
{
lcd_commands_step = lcd_show_fullscreen_message_yes_no_and_wait_P(MSG_FILAMENT_CLEAN) ? 1 : 4;
lcd_update_enable(true);
lcdDrawUpdate = 2;
}
if (lcd_commands_step == 3 && !blocks_queued()) {
lcd_commands_step = farm_mode ? 1:2; //don't show question about clear color if we are in farm mode
}
if (lcd_commands_step == 4 && !blocks_queued())
{
//lcd_setstatuspgm(MSG_LOADING_FILAMENT);
enquecommand_P(PSTR(LOAD_FILAMENT_2)); //slow_sequence
lcd_commands_step = 3;
}
if (lcd_commands_step == 5 && !blocks_queued())
{
enquecommand_P(PSTR(LOAD_FILAMENT_1)); //fast sequence
lcd_setstatuspgm(MSG_LOADING_FILAMENT);
//enquecommand_P(PSTR("G4")); //dwell
lcd_commands_step = 4;
}
if (lcd_commands_step == 6 && !blocks_queued())
{
lcd_setstatuspgm(MSG_INSERT_FILAMENT);
enquecommand_P(PSTR(LOAD_FILAMENT_0)); //set E relative
enquecommand_P(PSTR("G1 E0.1 F400"));
lcd_commands_step = 5;
}
if (lcd_commands_step == 7 && !blocks_queued())
{
lcd_setstatuspgm(MSG_PLEASE_WAIT);
enable_z();
custom_message = true;
custom_message_type = 2;
lcd_commands_step = 6;
}
}
if (lcd_commands_type == LCD_COMMAND_STOP_PRINT) /// stop print if (lcd_commands_type == LCD_COMMAND_STOP_PRINT) /// stop print
{ {
@ -582,6 +526,9 @@ void lcd_commands()
{ {
// M84: Disable steppers. // M84: Disable steppers.
enquecommand_P(PSTR("M84")); enquecommand_P(PSTR("M84"));
#ifdef SNMM
enquecommand_P(PSTR("PRUSA ResF")); //resets flag at the end of the print (used for SNMM)
#endif
autotempShutdown(); autotempShutdown();
lcd_commands_step = 2; lcd_commands_step = 2;
} }
@ -913,8 +860,7 @@ void lcd_unLoadFilament()
if (degHotend0() > EXTRUDE_MINTEMP) { if (degHotend0() > EXTRUDE_MINTEMP) {
enquecommand_P(PSTR(UNLOAD_FILAMENT_0)); enquecommand_P(PSTR("M702")); //unload filament
enquecommand_P(PSTR(UNLOAD_FILAMENT_1));
} else { } else {
@ -1122,10 +1068,9 @@ void lcd_LoadFilament()
if (degHotend0() > EXTRUDE_MINTEMP) if (degHotend0() > EXTRUDE_MINTEMP)
{ {
custom_message = true; custom_message = true;
lcd_commands_type = LCD_COMMAND_LOAD_FILAMENT; loading_flag = true;
enquecommand_P(PSTR("M701")); //load filament
SERIAL_ECHOLN("Loading filament"); SERIAL_ECHOLN("Loading filament");
// commands() will handle the rest
} }
else else
{ {
@ -1767,49 +1712,58 @@ void lcd_wait_for_click()
} }
} }
int8_t lcd_show_fullscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting) int8_t lcd_show_fullscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting, bool default_yes)
{ {
lcd_display_message_fullscreen_P(msg);
lcd.setCursor(1, 2); lcd_display_message_fullscreen_P(msg);
lcd_printPGM(MSG_YES);
lcd.setCursor(0, 3);
lcd_printPGM(PSTR(">"));
lcd_printPGM(MSG_NO);
bool yes = false;
// Wait for user confirmation or a timeout. if (default_yes) {
unsigned long previous_millis_cmd = millis(); lcd.setCursor(0, 2);
int8_t enc_dif = encoderDiff; lcd_printPGM(PSTR(">"));
for (;;) { lcd_printPGM(MSG_YES);
if (allow_timeouting && millis() - previous_millis_cmd > LCD_TIMEOUT_TO_STATUS) lcd.setCursor(1, 3);
return -1; lcd_printPGM(MSG_NO);
manage_heater(); }
manage_inactivity(true); else {
if (abs((enc_dif - encoderDiff)) > 4) { lcd.setCursor(1, 2);
if (abs(enc_dif - encoderDiff) > 1) { lcd_printPGM(MSG_YES);
lcd.setCursor(0, 2); lcd.setCursor(0, 3);
if (enc_dif > encoderDiff && yes) { lcd_printPGM(PSTR(">"));
lcd_printPGM((PSTR(" "))); lcd_printPGM(MSG_NO);
lcd.setCursor(0, 3); }
lcd_printPGM((PSTR(">"))); bool yes = default_yes ? true : false;
yes = false;
} else if (enc_dif < encoderDiff && ! yes) { // Wait for user confirmation or a timeout.
lcd_printPGM((PSTR(">"))); unsigned long previous_millis_cmd = millis();
lcd.setCursor(0, 3); int8_t enc_dif = encoderDiff;
lcd_printPGM((PSTR(" "))); for (;;) {
yes = true; if (allow_timeouting && millis() - previous_millis_cmd > LCD_TIMEOUT_TO_STATUS)
} return -1;
enc_dif = encoderDiff; manage_heater();
} manage_inactivity(true);
} if (abs(enc_dif - encoderDiff) > 4) {
if (lcd_clicked()) { lcd.setCursor(0, 2);
while (lcd_clicked()) ; if (enc_dif > encoderDiff && yes) {
delay(10); lcd_printPGM((PSTR(" ")));
while (lcd_clicked()) ; lcd.setCursor(0, 3);
return yes; lcd_printPGM((PSTR(">")));
} yes = false;
} }
else if (enc_dif < encoderDiff && !yes) {
lcd_printPGM((PSTR(">")));
lcd.setCursor(0, 3);
lcd_printPGM((PSTR(" ")));
yes = true;
}
enc_dif = encoderDiff;
}
if (lcd_clicked()) {
while (lcd_clicked());
delay(10);
while (lcd_clicked());
return yes;
}
}
} }
void lcd_bed_calibration_show_result(BedSkewOffsetDetectionResultType result, uint8_t point_too_far_mask) void lcd_bed_calibration_show_result(BedSkewOffsetDetectionResultType result, uint8_t point_too_far_mask)
@ -2264,14 +2218,15 @@ void lcd_mesh_calibration_z()
void lcd_calibrate_extruder() { void lcd_calibrate_extruder() {
if (degHotend0() > EXTRUDE_MINTEMP) if (degHotend0() > EXTRUDE_MINTEMP)
{ {
current_position[E_AXIS] = 0; current_position[E_AXIS] = 0; //set initial position to zero
plan_set_e_position(current_position[E_AXIS]); plan_set_e_position(current_position[E_AXIS]);
long steps_start = current_position[E_AXIS]*axis_steps_per_unit[E_AXIS]; //long steps_start = st_get_position(E_AXIS);
long steps_final; long steps_final;
float e_steps_per_unit; float e_steps_per_unit;
float feedrate = (180 / axis_steps_per_unit[E_AXIS]) * 5; float feedrate = (180 / axis_steps_per_unit[E_AXIS]) * 3; //initial automatic extrusion feedrate (depends on current value of axis_steps_per_unit to avoid too fast extrusion)
float e_shift_calibration = (axis_steps_per_unit[E_AXIS] > 180 ) ? ((180 / axis_steps_per_unit[E_AXIS]) * 70): 70; float e_shift_calibration = (axis_steps_per_unit[E_AXIS] > 180 ) ? ((180 / axis_steps_per_unit[E_AXIS]) * 70): 70; //length of initial automatic extrusion sequence
const char *msg_e_cal_knob = MSG_E_CAL_KNOB; const char *msg_e_cal_knob = MSG_E_CAL_KNOB;
const char *msg_next_e_cal_knob = lcd_display_message_fullscreen_P(msg_e_cal_knob); const char *msg_next_e_cal_knob = lcd_display_message_fullscreen_P(msg_e_cal_knob);
const bool multi_screen = msg_next_e_cal_knob != NULL; const bool multi_screen = msg_next_e_cal_knob != NULL;
@ -2298,7 +2253,7 @@ void lcd_calibrate_extruder() {
//manage_inactivity(true); //manage_inactivity(true);
manage_heater(); manage_heater();
if (abs(encoderDiff) >= ENCODER_PULSES_PER_STEP) { if (abs(encoderDiff) >= ENCODER_PULSES_PER_STEP) { //adjusting mark by knob rotation
delay_keep_alive(50); delay_keep_alive(50);
//previous_millis_cmd = millis(); //previous_millis_cmd = millis();
encoderPosition += (encoderDiff / ENCODER_PULSES_PER_STEP); encoderPosition += (encoderDiff / ENCODER_PULSES_PER_STEP);
@ -2313,8 +2268,9 @@ void lcd_calibrate_extruder() {
} }
steps_final = current_position[E_AXIS] * axis_steps_per_unit[E_AXIS]; steps_final = current_position[E_AXIS] * axis_steps_per_unit[E_AXIS];
//steps_final = st_get_position(E_AXIS);
lcdDrawUpdate = 1; lcdDrawUpdate = 1;
e_steps_per_unit = ((float)(steps_final - steps_start)) / 100.f; e_steps_per_unit = ((float)(steps_final)) / 100.0f;
if (e_steps_per_unit < MIN_E_STEPS_PER_UNIT) e_steps_per_unit = MIN_E_STEPS_PER_UNIT; if (e_steps_per_unit < MIN_E_STEPS_PER_UNIT) e_steps_per_unit = MIN_E_STEPS_PER_UNIT;
if (e_steps_per_unit > MAX_E_STEPS_PER_UNIT) e_steps_per_unit = MAX_E_STEPS_PER_UNIT; if (e_steps_per_unit > MAX_E_STEPS_PER_UNIT) e_steps_per_unit = MAX_E_STEPS_PER_UNIT;
@ -4203,6 +4159,8 @@ static void menu_action_function(menuFunc_t data) {
} }
static void menu_action_sdfile(const char* filename, char* longFilename) static void menu_action_sdfile(const char* filename, char* longFilename)
{ {
loading_flag = false;
char cmd[30]; char cmd[30];
char* c; char* c;
sprintf_P(cmd, PSTR("M23 %s"), filename); sprintf_P(cmd, PSTR("M23 %s"), filename);

2
Firmware/ultralcd.h
View File

@ -49,7 +49,7 @@ void lcd_mylang();
extern void lcd_wait_for_click(); extern void lcd_wait_for_click();
extern void lcd_show_fullscreen_message_and_wait_P(const char *msg); extern void lcd_show_fullscreen_message_and_wait_P(const char *msg);
// 0: no, 1: yes, -1: timeouted // 0: no, 1: yes, -1: timeouted
extern int8_t lcd_show_fullscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting = true); extern int8_t lcd_show_fullscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting = true, bool default_yes = false);
// Ask the user to move the Z axis up to the end stoppers and let // Ask the user to move the Z axis up to the end stoppers and let
// the user confirm that it has been done. // the user confirm that it has been done.