diff --git a/Firmware/messages.cpp b/Firmware/messages.cpp
index 52c657386..a1647d329 100644
--- a/Firmware/messages.cpp
+++ b/Firmware/messages.cpp
@@ -53,12 +53,12 @@ const char MSG_SELECT_FILAMENT[] PROGMEM_I1 = ISTR("Select filament:"); ////MSG_
 const char MSG_LAST_PRINT[] PROGMEM_I1 = ISTR("Last print"); ////MSG_LAST_PRINT c=18
 const char MSG_LAST_PRINT_FAILURES[] PROGMEM_I1 = ISTR("Last print failures"); ////MSG_LAST_PRINT_FAILURES c=20
 const char MSG_PRELOAD_TO_MMU[] PROGMEM_I1 = ISTR("Preload to MMU"); ////MSG_PRELOAD_TO_MMU c=17
-const char MSG_LOAD_FILAMENT[] PROGMEM_I1 = ISTR("Load filament"); ////MSG_LOAD_FILAMENT c=17
+const char MSG_LOAD_FILAMENT[] PROGMEM_I1 = ISTR("Load filament"); ////MSG_LOAD_FILAMENT c=16
 const char MSG_LOADING_TEST[] PROGMEM_I1 = ISTR("Loading Test"); ////MSG_LOADING_TEST c=18
 const char MSG_LOADING_FILAMENT[] PROGMEM_I1 = ISTR("Loading filament"); ////MSG_LOADING_FILAMENT c=20
 const char MSG_TESTING_FILAMENT[] PROGMEM_I1 = ISTR("Testing filament"); ////MSG_TESTING_FILAMENT c=20
 const char MSG_EJECT_FROM_MMU[] PROGMEM_I1 = ISTR("Eject from MMU"); ////MSG_EJECT_FROM_MMU c=16
-const char MSG_CUT_FILAMENT[] PROGMEM_I1 = ISTR("Cut filament"); ////MSG_CUT_FILAMENT c=17
+const char MSG_CUT_FILAMENT[] PROGMEM_I1 = ISTR("Cut filament"); ////MSG_CUT_FILAMENT c=16
 const char MSG_MAIN[] PROGMEM_I1 = ISTR("Main"); ////MSG_MAIN c=18
 const char MSG_BACK[] PROGMEM_I1 = ISTR("Back"); ////MSG_BACK c=18
 const char MSG_SHEET[] PROGMEM_I1 = ISTR("Sheet"); ////MSG_SHEET c=10
diff --git a/Firmware/ultralcd.cpp b/Firmware/ultralcd.cpp
index f10651c46..04b232c21 100644
--- a/Firmware/ultralcd.cpp
+++ b/Firmware/ultralcd.cpp
@@ -4765,7 +4765,7 @@ static void mmu_preload_filament_menu() {
     MENU_ITEM_BACK_P(_T(MSG_MAIN));
     MENU_ITEM_FUNCTION_P(_T(MSG_LOAD_ALL), load_all_wrapper);
     for (uint8_t i = 0; i < MMU_FILAMENT_COUNT; i++)
-        MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), i + '1', load_filament_wrapper, i); ////MSG_PRELOAD_TO_MMU c=16
+        MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), i + '1', load_filament_wrapper, i);
     MENU_END();
 }
 
@@ -4788,7 +4788,7 @@ static void mmu_load_to_nozzle_menu() {
     MENU_BEGIN();
     MENU_ITEM_BACK_P(_T(MSG_MAIN));
     for (uint8_t i = 0; i < MMU_FILAMENT_COUNT; i++)
-        MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), i + '1', lcd_mmu_load_to_nozzle_wrapper, i); ////MSG_LOAD_FILAMENT c=16
+        MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), i + '1', lcd_mmu_load_to_nozzle_wrapper, i);
     MENU_END();
 }
 
@@ -4801,7 +4801,7 @@ static void mmu_fil_eject_menu() {
     MENU_BEGIN();
     MENU_ITEM_BACK_P(_T(MSG_MAIN));
     for (uint8_t i = 0; i < MMU_FILAMENT_COUNT; i++)
-        MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FROM_MMU), i + '1', mmu_eject_filament, i); ////MSG_EJECT_FROM_MMU c=16
+        MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FROM_MMU), i + '1', mmu_eject_filament, i);
     MENU_END();
 }
 
@@ -4814,7 +4814,7 @@ static void mmu_cut_filament_menu() {
     MENU_BEGIN();
     MENU_ITEM_BACK_P(_T(MSG_MAIN));
     for (uint8_t i = 0; i < MMU_FILAMENT_COUNT; i++)
-        MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), i + '1', mmu_cut_filament_wrapper, i); ////MSG_CUT_FILAMENT c=16
+        MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), i + '1', mmu_cut_filament_wrapper, i);
     MENU_END();
 }
 #endif //MMU_HAS_CUTTER
@@ -4834,7 +4834,7 @@ static void mmu_loading_test_menu() {
     MENU_ITEM_BACK_P(_T(MSG_MAIN));
     MENU_ITEM_FUNCTION_P(_T(MSG_LOAD_ALL), loading_test_all_wrapper);
     for (uint8_t i = 0; i < MMU_FILAMENT_COUNT; i++)
-        MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), i + '1', loading_test_wrapper, i); ////MSG_LOAD_FILAMENT c=16
+        MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), i + '1', loading_test_wrapper, i);
     MENU_END();
 }
 
diff --git a/lang/po/Firmware.pot b/lang/po/Firmware.pot
index b76992fbc..011591d47 100644
--- a/lang/po/Firmware.pot
+++ b/lang/po/Firmware.pot
@@ -383,7 +383,7 @@ msgid ""
 "Normal mode"
 msgstr ""
 
-#. MSG_CUT_FILAMENT c=17
+#. MSG_CUT_FILAMENT c=16
 #: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:327
 #: ../../Firmware/ultralcd.cpp:5007 ../../Firmware/ultralcd.cpp:5431
 msgid "Cut filament"
@@ -1033,7 +1033,7 @@ msgstr ""
 msgid "Load All"
 msgstr ""
 
-#. MSG_LOAD_FILAMENT c=17
+#. MSG_LOAD_FILAMENT c=16
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:4952
 #: ../../Firmware/ultralcd.cpp:4971 ../../Firmware/ultralcd.cpp:5032
 #: ../../Firmware/ultralcd.cpp:5425 ../../Firmware/ultralcd.cpp:5442
@@ -1636,6 +1636,11 @@ msgstr ""
 msgid "Preheating to unload"
 msgstr ""
 
+#. MSG_PRELOAD_TO_MMU c=17
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5227
+msgid "Preload to MMU"
+msgstr ""
+
 #. MSG_PROGRESS_PREPARE_BLADE c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:22
 #: ../../Firmware/mmu2_progress_converter.cpp:53
diff --git a/lang/po/Firmware_cs.po b/lang/po/Firmware_cs.po
index 057eba849..cf10b606b 100644
--- a/lang/po/Firmware_cs.po
+++ b/lang/po/Firmware_cs.po
@@ -402,7 +402,7 @@ msgstr ""
 "funguje pouze v\n"
 "Normal modu"
 
-#. MSG_CUT_FILAMENT c=17
+#. MSG_CUT_FILAMENT c=16
 #: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:327
 #: ../../Firmware/ultralcd.cpp:5007 ../../Firmware/ultralcd.cpp:5431
 msgid "Cut filament"
@@ -1056,7 +1056,7 @@ msgstr "Doladeni osy Z"
 msgid "Load All"
 msgstr "Nacist vse"
 
-#. MSG_LOAD_FILAMENT c=17
+#. MSG_LOAD_FILAMENT c=16
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:4952
 #: ../../Firmware/ultralcd.cpp:4971 ../../Firmware/ultralcd.cpp:5032
 #: ../../Firmware/ultralcd.cpp:5425 ../../Firmware/ultralcd.cpp:5442
@@ -2530,6 +2530,11 @@ msgstr ""
 "Verze firmwaru MMU není kompatibilní s FW tiskárny. Aktualizujte na verzi "
 "2.1.9."
 
+#. MSG_PRELOAD_TO_MMU c=17
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5227
+msgid "Preload to MMU"
+msgstr "Zavést do MMU"
+
 #~ msgid "Eject filament"
 #~ msgstr "Vysunout fil."
 
diff --git a/lang/po/Firmware_de.po b/lang/po/Firmware_de.po
index b876a46f6..7e960fddd 100644
--- a/lang/po/Firmware_de.po
+++ b/lang/po/Firmware_de.po
@@ -405,7 +405,7 @@ msgstr ""
 "nur im Modus Normal\n"
 "genutzt werden"
 
-#. MSG_CUT_FILAMENT c=17
+#. MSG_CUT_FILAMENT c=16
 #: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:327
 #: ../../Firmware/ultralcd.cpp:5007 ../../Firmware/ultralcd.cpp:5431
 msgid "Cut filament"
@@ -1068,7 +1068,7 @@ msgstr "Z einstellen"
 msgid "Load All"
 msgstr "Alle laden"
 
-#. MSG_LOAD_FILAMENT c=17
+#. MSG_LOAD_FILAMENT c=16
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:4952
 #: ../../Firmware/ultralcd.cpp:4971 ../../Firmware/ultralcd.cpp:5032
 #: ../../Firmware/ultralcd.cpp:5425 ../../Firmware/ultralcd.cpp:5442
@@ -2558,6 +2558,11 @@ msgstr ""
 "Die Firmware-Version der MMU ist mit der FW des Druckers nicht kompatibel. "
 "Update auf Version 2.1.9."
 
+#. MSG_PRELOAD_TO_MMU c=17
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5227
+msgid "Preload to MMU"
+msgstr "In MMU laden"
+
 #~ msgid "Eject filament"
 #~ msgstr "Filamentauswurf"
 
diff --git a/lang/po/Firmware_es.po b/lang/po/Firmware_es.po
index 5401d8b6d..13edf460a 100644
--- a/lang/po/Firmware_es.po
+++ b/lang/po/Firmware_es.po
@@ -402,7 +402,7 @@ msgstr ""
 "ser activada solo en\n"
 "Modo normal"
 
-#. MSG_CUT_FILAMENT c=17
+#. MSG_CUT_FILAMENT c=16
 #: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:327
 #: ../../Firmware/ultralcd.cpp:5007 ../../Firmware/ultralcd.cpp:5431
 msgid "Cut filament"
@@ -1069,12 +1069,12 @@ msgstr "Micropaso Eje Z"
 msgid "Load All"
 msgstr "Intr. todos fil."
 
-#. MSG_LOAD_FILAMENT c=17
+#. MSG_LOAD_FILAMENT c=16
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:4952
 #: ../../Firmware/ultralcd.cpp:4971 ../../Firmware/ultralcd.cpp:5032
 #: ../../Firmware/ultralcd.cpp:5425 ../../Firmware/ultralcd.cpp:5442
 msgid "Load filament"
-msgstr "Introducir filam."
+msgstr "Introducir fil."
 
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5426
@@ -2554,6 +2554,11 @@ msgstr ""
 "La versión de firmware de la MMU es incompatible con el FW de la impresora. "
 "Actualizar a la versión 2.1.9."
 
+#. MSG_PRELOAD_TO_MMU c=17
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5227
+msgid "Preload to MMU"
+msgstr "Precarga a MMU"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"
 
diff --git a/lang/po/Firmware_fr.po b/lang/po/Firmware_fr.po
index 470a80aad..5375ef7e0 100644
--- a/lang/po/Firmware_fr.po
+++ b/lang/po/Firmware_fr.po
@@ -405,7 +405,7 @@ msgstr ""
 "active seulement en\n"
 "mode Normal"
 
-#. MSG_CUT_FILAMENT c=17
+#. MSG_CUT_FILAMENT c=16
 #: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:327
 #: ../../Firmware/ultralcd.cpp:5007 ../../Firmware/ultralcd.cpp:5431
 msgid "Cut filament"
@@ -1076,7 +1076,7 @@ msgstr "Ajuster Z en dir."
 msgid "Load All"
 msgstr "Tout Charger"
 
-#. MSG_LOAD_FILAMENT c=17
+#. MSG_LOAD_FILAMENT c=16
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:4952
 #: ../../Firmware/ultralcd.cpp:4971 ../../Firmware/ultralcd.cpp:5032
 #: ../../Firmware/ultralcd.cpp:5425 ../../Firmware/ultralcd.cpp:5442
@@ -2568,6 +2568,11 @@ msgstr ""
 "La version du MMU est incompatible avec le FW de l'imprimante. Mise à jour "
 "vers la version 2.1.9."
 
+#. MSG_PRELOAD_TO_MMU c=17
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5227
+msgid "Preload to MMU"
+msgstr "Précharge à MMU"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reini MMU"
 
diff --git a/lang/po/Firmware_hr.po b/lang/po/Firmware_hr.po
index ea0d7c593..e6406ee05 100644
--- a/lang/po/Firmware_hr.po
+++ b/lang/po/Firmware_hr.po
@@ -399,7 +399,7 @@ msgid ""
 "Normal mode"
 msgstr "Detekcija udarca moze biti ukljuceno samo u Normalnom nacinu rada"
 
-#. MSG_CUT_FILAMENT c=17
+#. MSG_CUT_FILAMENT c=16
 #: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:327
 #: ../../Firmware/ultralcd.cpp:5007 ../../Firmware/ultralcd.cpp:5431
 msgid "Cut filament"
@@ -1068,12 +1068,12 @@ msgstr "Live podesavanje Z"
 msgid "Load All"
 msgstr "Puni sve"
 
-#. MSG_LOAD_FILAMENT c=17
+#. MSG_LOAD_FILAMENT c=16
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:4952
 #: ../../Firmware/ultralcd.cpp:4971 ../../Firmware/ultralcd.cpp:5032
 #: ../../Firmware/ultralcd.cpp:5425 ../../Firmware/ultralcd.cpp:5442
 msgid "Load filament"
-msgstr "Napunite filament"
+msgstr "Napunite fil."
 
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5426
@@ -2547,6 +2547,11 @@ msgstr ""
 "Verzija firmware-a MMU nekompatibilna s FW-om pisača. Ažuriranje na verziju "
 "2.1.9."
 
+#. MSG_PRELOAD_TO_MMU c=17
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5227
+msgid "Preload to MMU"
+msgstr "Predpunjenje MMU"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"
 
diff --git a/lang/po/Firmware_hu.po b/lang/po/Firmware_hu.po
index 63e3970e8..43756b906 100644
--- a/lang/po/Firmware_hu.po
+++ b/lang/po/Firmware_hu.po
@@ -402,7 +402,7 @@ msgstr ""
 "normal modban\n"
 "kapcsolhato be"
 
-#. MSG_CUT_FILAMENT c=17
+#. MSG_CUT_FILAMENT c=16
 #: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:327
 #: ../../Firmware/ultralcd.cpp:5007 ../../Firmware/ultralcd.cpp:5431
 msgid "Cut filament"
@@ -1069,7 +1069,7 @@ msgstr "Z magassag beall."
 msgid "Load All"
 msgstr "Ossz.bet"
 
-#. MSG_LOAD_FILAMENT c=17
+#. MSG_LOAD_FILAMENT c=16
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:4952
 #: ../../Firmware/ultralcd.cpp:4971 ../../Firmware/ultralcd.cpp:5032
 #: ../../Firmware/ultralcd.cpp:5425 ../../Firmware/ultralcd.cpp:5442
@@ -2551,6 +2551,11 @@ msgstr ""
 "Az MMU firmware-verziója nem kompatibilis a nyomtató FW-vel. Frissíts a "
 "2.1.9-es verzióra."
 
+#. MSG_PRELOAD_TO_MMU c=17
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5227
+msgid "Preload to MMU"
+msgstr "Betöltés az MMUba"
+
 #~ msgid "Reset MMU"
 #~ msgstr "MMUreszet"
 
diff --git a/lang/po/Firmware_it.po b/lang/po/Firmware_it.po
index ef615e540..f95d64b53 100644
--- a/lang/po/Firmware_it.po
+++ b/lang/po/Firmware_it.po
@@ -404,7 +404,7 @@ msgstr ""
 "attivabile solo\n"
 "in Modalita normale"
 
-#. MSG_CUT_FILAMENT c=17
+#. MSG_CUT_FILAMENT c=16
 #: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:327
 #: ../../Firmware/ultralcd.cpp:5007 ../../Firmware/ultralcd.cpp:5431
 msgid "Cut filament"
@@ -1071,7 +1071,7 @@ msgstr "Compensazione Z"
 msgid "Load All"
 msgstr "Carica tutti"
 
-#. MSG_LOAD_FILAMENT c=17
+#. MSG_LOAD_FILAMENT c=16
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:4952
 #: ../../Firmware/ultralcd.cpp:4971 ../../Firmware/ultralcd.cpp:5032
 #: ../../Firmware/ultralcd.cpp:5425 ../../Firmware/ultralcd.cpp:5442
@@ -2552,6 +2552,11 @@ msgstr ""
 "La versione del firmware dell MMU non è compatibile con il firmware della "
 "stampante. Aggiornamento alla versione 2.1.9."
 
+#. MSG_PRELOAD_TO_MMU c=17
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5227
+msgid "Preload to MMU"
+msgstr "Precarica MMU"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"
 
diff --git a/lang/po/Firmware_nl.po b/lang/po/Firmware_nl.po
index 423118134..c52b95d68 100644
--- a/lang/po/Firmware_nl.po
+++ b/lang/po/Firmware_nl.po
@@ -404,7 +404,7 @@ msgstr ""
 "alleen in normaal\n"
 "gebruikt worden"
 
-#. MSG_CUT_FILAMENT c=17
+#. MSG_CUT_FILAMENT c=16
 #: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:327
 #: ../../Firmware/ultralcd.cpp:5007 ../../Firmware/ultralcd.cpp:5431
 msgid "Cut filament"
@@ -1072,7 +1072,7 @@ msgstr "Live Z aanpassen"
 msgid "Load All"
 msgstr "Laad alle"
 
-#. MSG_LOAD_FILAMENT c=17
+#. MSG_LOAD_FILAMENT c=16
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:4952
 #: ../../Firmware/ultralcd.cpp:4971 ../../Firmware/ultralcd.cpp:5032
 #: ../../Firmware/ultralcd.cpp:5425 ../../Firmware/ultralcd.cpp:5442
@@ -2556,6 +2556,11 @@ msgstr ""
 "De firmwareversie van de MMU is niet compatibel met de firmware van de "
 "printer. Update naar versie 2.1.9."
 
+#. MSG_PRELOAD_TO_MMU c=17
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5227
+msgid "Preload to MMU"
+msgstr "Voorladen in MMU"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"
 
diff --git a/lang/po/Firmware_no.po b/lang/po/Firmware_no.po
index 791faf8df..63c539a69 100644
--- a/lang/po/Firmware_no.po
+++ b/lang/po/Firmware_no.po
@@ -403,7 +403,7 @@ msgstr ""
 "bare skrus på i\n"
 "Normal modus"
 
-#. MSG_CUT_FILAMENT c=17
+#. MSG_CUT_FILAMENT c=16
 #: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:327
 #: ../../Firmware/ultralcd.cpp:5007 ../../Firmware/ultralcd.cpp:5431
 msgid "Cut filament"
@@ -1062,12 +1062,12 @@ msgstr "Juster Live-Z"
 msgid "Load All"
 msgstr "Last Alle"
 
-#. MSG_LOAD_FILAMENT c=17
+#. MSG_LOAD_FILAMENT c=16
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:4952
 #: ../../Firmware/ultralcd.cpp:4971 ../../Firmware/ultralcd.cpp:5032
 #: ../../Firmware/ultralcd.cpp:5425 ../../Firmware/ultralcd.cpp:5442
 msgid "Load filament"
-msgstr "Last inn filament"
+msgstr "Last inn filam."
 
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5426
@@ -2529,6 +2529,11 @@ msgstr ""
 "MMU fastvareversjon er inkompatibel med skriverens FW. Oppdatering til "
 "versjon 2.1.9."
 
+#. MSG_PRELOAD_TO_MMU c=17
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5227
+msgid "Preload to MMU"
+msgstr "Forlast til MMU"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"
 
diff --git a/lang/po/Firmware_pl.po b/lang/po/Firmware_pl.po
index 318593691..dfbae3322 100644
--- a/lang/po/Firmware_pl.po
+++ b/lang/po/Firmware_pl.po
@@ -404,7 +404,7 @@ msgstr ""
 "tylko w\n"
 "trybie Normalnym"
 
-#. MSG_CUT_FILAMENT c=17
+#. MSG_CUT_FILAMENT c=16
 #: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:327
 #: ../../Firmware/ultralcd.cpp:5007 ../../Firmware/ultralcd.cpp:5431
 msgid "Cut filament"
@@ -1068,7 +1068,7 @@ msgstr "Ustaw. Live Z"
 msgid "Load All"
 msgstr "Zalad. wszystkie"
 
-#. MSG_LOAD_FILAMENT c=17
+#. MSG_LOAD_FILAMENT c=16
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:4952
 #: ../../Firmware/ultralcd.cpp:4971 ../../Firmware/ultralcd.cpp:5032
 #: ../../Firmware/ultralcd.cpp:5425 ../../Firmware/ultralcd.cpp:5442
@@ -2548,6 +2548,11 @@ msgstr ""
 "Wersja oprogramowania układowego MMU jest niezgodna z oprogramowaniem "
 "sprzętowym drukarki. Zaktualizuj do wersji 2.1.9."
 
+#. MSG_PRELOAD_TO_MMU c=17
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5227
+msgid "Preload to MMU"
+msgstr "Załaduj do MMU"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"
 
diff --git a/lang/po/Firmware_ro.po b/lang/po/Firmware_ro.po
index 775d92fc0..95ada7ee6 100644
--- a/lang/po/Firmware_ro.po
+++ b/lang/po/Firmware_ro.po
@@ -405,7 +405,7 @@ msgstr ""
 "poate fi pornita\n"
 "doar in modul normal"
 
-#. MSG_CUT_FILAMENT c=17
+#. MSG_CUT_FILAMENT c=16
 #: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:327
 #: ../../Firmware/ultralcd.cpp:5007 ../../Firmware/ultralcd.cpp:5431
 msgid "Cut filament"
@@ -1070,7 +1070,7 @@ msgstr "Reglare Z live"
 msgid "Load All"
 msgstr "Incarca toate"
 
-#. MSG_LOAD_FILAMENT c=17
+#. MSG_LOAD_FILAMENT c=16
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:4952
 #: ../../Firmware/ultralcd.cpp:4971 ../../Firmware/ultralcd.cpp:5032
 #: ../../Firmware/ultralcd.cpp:5425 ../../Firmware/ultralcd.cpp:5442
@@ -2552,6 +2552,11 @@ msgstr ""
 "Versiunea de firmware a MMU este incompatibilă cu FW-ul imprimantei. "
 "Actualizați la versiunea 2.1.9."
 
+#. MSG_PRELOAD_TO_MMU c=17
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5227
+msgid "Preload to MMU"
+msgstr "Preîncărcare MMU"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"
 
diff --git a/lang/po/Firmware_sk.po b/lang/po/Firmware_sk.po
index f95abaf83..2ff9248a3 100644
--- a/lang/po/Firmware_sk.po
+++ b/lang/po/Firmware_sk.po
@@ -402,11 +402,11 @@ msgstr ""
 "byt zapnuta len v\n"
 "Normalnom rezime"
 
-#. MSG_CUT_FILAMENT c=17
+#. MSG_CUT_FILAMENT c=16
 #: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:327
 #: ../../Firmware/ultralcd.cpp:5007 ../../Firmware/ultralcd.cpp:5431
 msgid "Cut filament"
-msgstr "Odstrihnut filam."
+msgstr "Odstrihnut fil."
 
 #. MSG_CUTTER c=9
 #: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4182
@@ -1064,7 +1064,7 @@ msgstr "Doladenie osi Z"
 msgid "Load All"
 msgstr "Zaviest vsetko"
 
-#. MSG_LOAD_FILAMENT c=17
+#. MSG_LOAD_FILAMENT c=16
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:4952
 #: ../../Firmware/ultralcd.cpp:4971 ../../Firmware/ultralcd.cpp:5032
 #: ../../Firmware/ultralcd.cpp:5425 ../../Firmware/ultralcd.cpp:5442
@@ -2535,6 +2535,11 @@ msgstr ""
 "Verzia firmvéru MMU nie je kompatibilná s FW tlačiarne. Aktualizácia na "
 "verziu 2.1.9."
 
+#. MSG_PRELOAD_TO_MMU c=17
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5227
+msgid "Preload to MMU"
+msgstr "Predzásobenie MMU"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"
 
diff --git a/lang/po/Firmware_sv.po b/lang/po/Firmware_sv.po
index f0d8e1d21..781d6d903 100644
--- a/lang/po/Firmware_sv.po
+++ b/lang/po/Firmware_sv.po
@@ -403,7 +403,7 @@ msgstr ""
 "endast aktiveras i\n"
 "normalt läge"
 
-#. MSG_CUT_FILAMENT c=17
+#. MSG_CUT_FILAMENT c=16
 #: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:327
 #: ../../Firmware/ultralcd.cpp:5007 ../../Firmware/ultralcd.cpp:5431
 msgid "Cut filament"
@@ -1069,7 +1069,7 @@ msgstr "Live justera Z"
 msgid "Load All"
 msgstr "Ladda alla"
 
-#. MSG_LOAD_FILAMENT c=17
+#. MSG_LOAD_FILAMENT c=16
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:4952
 #: ../../Firmware/ultralcd.cpp:4971 ../../Firmware/ultralcd.cpp:5032
 #: ../../Firmware/ultralcd.cpp:5425 ../../Firmware/ultralcd.cpp:5442
@@ -2542,6 +2542,11 @@ msgstr ""
 "MMU firmwareversion är inkompatibel med skrivarens FW. Uppdatering till "
 "version 2.1.9."
 
+#. MSG_PRELOAD_TO_MMU c=17
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5227
+msgid "Preload to MMU"
+msgstr "Förladdning MMU"
+
 #~ msgid "Reset MMU"
 #~ msgstr "Reset MMU"