josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

optimisation: M105 doesn't have a T parameter 

Remove parameter from gcode_M105() extruder is always 0.

Change in memory:
Flash: -64 bytes
SRAM: 0 bytes
This commit is contained in:
Guðni Már Gilbert 2023-01-13 16:59:56 +00:00
parent 11f56bf900
commit 44660f668a
1 changed files with 40 additions and 55 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

95
Firmware/Marlin_main.cpp
View File

@ -402,7 +402,7 @@ static bool setTargetedHotend(int code, uint8_t &extruder);
static void print_time_remaining_init(); static void print_time_remaining_init();
static void wait_for_heater(long codenum, uint8_t extruder); static void wait_for_heater(long codenum, uint8_t extruder);
static void gcode_G28(bool home_x_axis, bool home_y_axis, bool home_z_axis); static void gcode_G28(bool home_x_axis, bool home_y_axis, bool home_z_axis);
static void gcode_M105(uint8_t extruder); static void gcode_M105();
#ifndef PINDA_THERMISTOR #ifndef PINDA_THERMISTOR
static void temp_compensation_start(); static void temp_compensation_start();
@ -1676,7 +1676,7 @@ void host_autoreport()
if (autoReportFeatures.TimerExpired()) if (autoReportFeatures.TimerExpired())
{ {
if(autoReportFeatures.Temp()){ if(autoReportFeatures.Temp()){
gcode_M105(active_extruder); gcode_M105();
} }
if(autoReportFeatures.Pos()){ if(autoReportFeatures.Pos()){
gcode_M114(); gcode_M114();
@ -2441,27 +2441,23 @@ void force_high_power_mode(bool start_high_power_section) {
} }
#endif //TMC2130 #endif //TMC2130
void gcode_M105(uint8_t extruder) void gcode_M105()
{ {
#if defined(TEMP_0_PIN) && TEMP_0_PIN > -1 #if defined(TEMP_0_PIN) && TEMP_0_PIN > -1
SERIAL_PROTOCOLPGM("T:"); SERIAL_PROTOCOLPGM("T:");
SERIAL_PROTOCOL_F(degHotend(extruder),1); SERIAL_PROTOCOL_F(degHotend(active_extruder),1);
SERIAL_PROTOCOLPGM(" /"); SERIAL_PROTOCOLPGM(" /");
SERIAL_PROTOCOL_F(degTargetHotend(extruder),1); SERIAL_PROTOCOL_F(degTargetHotend(active_extruder),1);
#if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1 #if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1
SERIAL_PROTOCOLPGM(" B:"); SERIAL_PROTOCOLPGM(" B:");
SERIAL_PROTOCOL_F(degBed(),1); SERIAL_PROTOCOL_F(degBed(),1);
SERIAL_PROTOCOLPGM(" /"); SERIAL_PROTOCOLPGM(" /");
SERIAL_PROTOCOL_F(degTargetBed(),1); SERIAL_PROTOCOL_F(degTargetBed(),1);
#endif //TEMP_BED_PIN #endif //TEMP_BED_PIN
for (int8_t cur_extruder = 0; cur_extruder < EXTRUDERS; ++cur_extruder) { SERIAL_PROTOCOLPGM(" T0:");
SERIAL_PROTOCOLPGM(" T"); SERIAL_PROTOCOL_F(degHotend(active_extruder),1);
SERIAL_PROTOCOL(cur_extruder); SERIAL_PROTOCOLPGM(" /");
SERIAL_PROTOCOL(':'); SERIAL_PROTOCOL_F(degTargetHotend(active_extruder),1);
SERIAL_PROTOCOL_F(degHotend(cur_extruder),1);
SERIAL_PROTOCOLPGM(" /");
SERIAL_PROTOCOL_F(degTargetHotend(cur_extruder),1);
}
#else #else
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(_n("No thermistors - no temperature"));////MSG_ERR_NO_THERMISTORS SERIAL_ERRORLNRPGM(_n("No thermistors - no temperature"));////MSG_ERR_NO_THERMISTORS
@ -2469,10 +2465,10 @@ void gcode_M105(uint8_t extruder)
SERIAL_PROTOCOLPGM(" @:"); SERIAL_PROTOCOLPGM(" @:");
#ifdef EXTRUDER_WATTS #ifdef EXTRUDER_WATTS
SERIAL_PROTOCOL((EXTRUDER_WATTS * getHeaterPower(tmp_extruder))/127); SERIAL_PROTOCOL((EXTRUDER_WATTS * getHeaterPower(active_extruder))/127);
SERIAL_PROTOCOLPGM("W"); SERIAL_PROTOCOLPGM("W");
#else #else
SERIAL_PROTOCOL(getHeaterPower(extruder)); SERIAL_PROTOCOL(getHeaterPower(active_extruder));
#endif #endif
SERIAL_PROTOCOLPGM(" B@:"); SERIAL_PROTOCOLPGM(" B@:");
@ -2508,23 +2504,19 @@ void gcode_M105(uint8_t extruder)
SERIAL_PROTOCOLPGM(" Rxb->"); SERIAL_PROTOCOLPGM(" Rxb->");
SERIAL_PROTOCOL_F(raw, 5); SERIAL_PROTOCOL_F(raw, 5);
#endif #endif
for (int8_t cur_extruder = 0; cur_extruder < EXTRUDERS; ++cur_extruder) { SERIAL_PROTOCOLPGM(" T0:");
SERIAL_PROTOCOLPGM(" T"); SERIAL_PROTOCOL_F(degHotend(active_extruder),1);
SERIAL_PROTOCOL(cur_extruder); SERIAL_PROTOCOLPGM("C->");
SERIAL_PROTOCOLPGM(":"); raw = rawHotendTemp(active_extruder);
SERIAL_PROTOCOL_F(degHotend(cur_extruder),1); SERIAL_PROTOCOL_F(raw/OVERSAMPLENR,5);
SERIAL_PROTOCOLPGM("C->"); SERIAL_PROTOCOLPGM(" Rt");
raw = rawHotendTemp(cur_extruder); SERIAL_PROTOCOL(active_extruder);
SERIAL_PROTOCOL_F(raw/OVERSAMPLENR,5); SERIAL_PROTOCOLPGM("->");
SERIAL_PROTOCOLPGM(" Rt"); SERIAL_PROTOCOL_F(100 * (1 + (PtA * (raw/OVERSAMPLENR)) + (PtB * sq((raw/OVERSAMPLENR)))), 5);
SERIAL_PROTOCOL(cur_extruder); SERIAL_PROTOCOLPGM(" Rx");
SERIAL_PROTOCOLPGM("->"); SERIAL_PROTOCOL(active_extruder);
SERIAL_PROTOCOL_F(100 * (1 + (PtA * (raw/OVERSAMPLENR)) + (PtB * sq((raw/OVERSAMPLENR)))), 5); SERIAL_PROTOCOLPGM("->");
SERIAL_PROTOCOLPGM(" Rx"); SERIAL_PROTOCOL_F(raw, 5);
SERIAL_PROTOCOL(cur_extruder);
SERIAL_PROTOCOLPGM("->");
SERIAL_PROTOCOL_F(raw, 5);
}
} }
#endif #endif
SERIAL_PROTOCOLLN(); SERIAL_PROTOCOLLN();
@ -6038,35 +6030,28 @@ Sigma_Exit:
break; break;
/*! /*!
### M105 - Report temperatures <a href="https://reprap.org/wiki/G-code#M105:_Get_Extruder_Temperature">M105: Get Extruder Temperature</a> ### M105 - Report temperatures <a href="https://reprap.org/wiki/G-code#M105:_Get_Extruder_Temperature">M105: Get Extruder Temperature</a>
Prints temperatures: Prints temperatures:
- `T:` - Hotend (actual / target) - `T:` - Hotend (actual / target)
- `B:` - Bed (actual / target) - `B:` - Bed (actual / target)
- `Tx:` - x Tool (actual / target) - `Tx:` - x Tool (actual / target)
- `@:` - Hotend power - `@:` - Hotend power
- `B@:` - Bed power - `B@:` - Bed power
- `P:` - PINDAv2 actual (only MK2.5/s and MK3/s) - `P:` - PINDAv2 actual (only MK2.5/s and MK3/s)
- `A:` - Ambient actual (only MK3/s) - `A:` - Ambient actual (only MK3/s)
_Example:_ _Example:_
ok T:20.2 /0.0 B:19.1 /0.0 T0:20.2 /0.0 @:0 B@:0 P:19.8 A:26.4 ok T:20.2 /0.0 B:19.1 /0.0 T0:20.2 /0.0 @:0 B@:0 P:19.8 A:26.4
*/ */
case 105: case 105:
{ {
uint8_t extruder;
if(setTargetedHotend(105, extruder)){
break;
}
SERIAL_PROTOCOLPGM("ok "); SERIAL_PROTOCOLPGM("ok ");
gcode_M105(extruder); gcode_M105();
cmdqueue_pop_front(); //prevent an ok after the command since this command uses an ok at the beginning. cmdqueue_pop_front(); //prevent an ok after the command since this command uses an ok at the beginning.
cmdbuffer_front_already_processed = true; cmdbuffer_front_already_processed = true;
break; break;
} }