diff --git a/Firmware/mmu.cpp b/Firmware/mmu.cpp
index 2bb2afa76..92d537076 100755
--- a/Firmware/mmu.cpp
+++ b/Firmware/mmu.cpp
@@ -1547,7 +1547,7 @@ void mmu_continue_loading(bool blocking)
     };
     Ls state = Ls::Enter;
 
-    const uint_least8_t max_retry = 2;
+    const uint_least8_t max_retry = 3;
     uint_least8_t retry = 0;
 
     while (!success)
diff --git a/Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h
index 6b918c0ce..36a9b5214 100644
--- a/Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h
@@ -504,7 +504,7 @@
 #define MMU_REQUIRED_FW_BUILDNR 132
 #define MMU_FORCE_STEALTH_MODE
 #define MMU_DEBUG //print communication between MMU2 and printer on serial
-//#define MMU_HAS_CUTTER
+#define MMU_HAS_CUTTER
 
 #define MMU_IDLER_SENSOR_ATTEMPTS_NR 21 //max. number of attempts to load filament if first load failed; value for max bowden length and case when loading fails right at the beginning
 
diff --git a/Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h b/Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h
index f37a00db2..ff13a7c61 100644
--- a/Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h
@@ -505,7 +505,7 @@
 #define MMU_REQUIRED_FW_BUILDNR 132
 #define MMU_FORCE_STEALTH_MODE
 #define MMU_DEBUG //print communication between MMU2 and printer on serial
-//#define MMU_HAS_CUTTER
+#define MMU_HAS_CUTTER
 
 #define MMU_IDLER_SENSOR_ATTEMPTS_NR 21 //max. number of attempts to load filament if first load failed; value for max bowden length and case when loading fails right at the beginning
 
diff --git a/Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h
index 935066d2a..71a23a1a6 100644
--- a/Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h
@@ -504,7 +504,7 @@
 #define MMU_REQUIRED_FW_BUILDNR 132
 #define MMU_FORCE_STEALTH_MODE
 #define MMU_DEBUG //print communication between MMU2 and printer on serial
-//#define MMU_HAS_CUTTER
+#define MMU_HAS_CUTTER
 
 // This is experimental feature requested by our test department.
 // There is no known use for ordinary user. If enabled by this macro
diff --git a/Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h b/Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h
index d5d0b7916..8d22a6cc9 100644
--- a/Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h
@@ -505,7 +505,7 @@
 #define MMU_REQUIRED_FW_BUILDNR 132
 #define MMU_FORCE_STEALTH_MODE
 #define MMU_DEBUG //print communication between MMU2 and printer on serial
-//#define MMU_HAS_CUTTER
+#define MMU_HAS_CUTTER
 
 // This is experimental feature requested by our test department.
 // There is no known use for ordinary user. If enabled by this macro
diff --git a/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
index 685d77c6b..400d098ff 100644
--- a/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
@@ -630,7 +630,7 @@
 #define MMU_REQUIRED_FW_BUILDNR 83
 #define MMU_HWRESET
 #define MMU_DEBUG //print communication between MMU2 and printer on serial
-//#define MMU_HAS_CUTTER
+#define MMU_HAS_CUTTER
 #define MMU_IDLER_SENSOR_ATTEMPTS_NR 21 //max. number of attempts to load filament if first load failed; value for max bowden length and case when loading fails right at the beginning
 
 #endif //__CONFIGURATION_PRUSA_H
diff --git a/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h
index 5ee149e75..48ed91392 100644
--- a/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h
@@ -632,7 +632,7 @@
 #define MMU_REQUIRED_FW_BUILDNR 83
 #define MMU_HWRESET
 #define MMU_DEBUG //print communication between MMU2 and printer on serial
-//#define MMU_HAS_CUTTER
+#define MMU_HAS_CUTTER
 
 // This is experimental feature requested by our test department.
 // There is no known use for ordinary user. If enabled by this macro