diff --git a/Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h
index c7e9e59e2..6ca8b213c 100644
--- a/Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h
@@ -420,7 +420,7 @@ THERMISTORS SETTINGS
 #define DEFAULT_RETRACTION 1 //used for PINDA temp calibration and pause print
 #endif
 
-#define END_FILE_SECTION 10000 //number of bytes from end of file used for checking if file is complete
+#define END_FILE_SECTION 20000 //number of bytes from end of file used for checking if file is complete
 
 // Safety timer
 #define SAFETYTIMER
diff --git a/Firmware/variants/1_75mm_MK2-RAMBo13a-E3Dv6full.h b/Firmware/variants/1_75mm_MK2-RAMBo13a-E3Dv6full.h
index 022c32937..d6352ae56 100644
--- a/Firmware/variants/1_75mm_MK2-RAMBo13a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK2-RAMBo13a-E3Dv6full.h
@@ -420,7 +420,7 @@ THERMISTORS SETTINGS
 #define DEFAULT_RETRACTION 1 //used for PINDA temp calibration and pause print
 #endif
 
-#define END_FILE_SECTION 10000 //number of bytes from end of file used for checking if file is complete
+#define END_FILE_SECTION 20000 //number of bytes from end of file used for checking if file is complete
 
 // Safety timer
 #define SAFETYTIMER
diff --git a/Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h
index abd9ab7bd..309ad57ad 100644
--- a/Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h
@@ -95,7 +95,7 @@
 #define MANUAL_FEEDRATE {2700, 2700, 1000, 100}   // set the speeds for manual moves (mm/min)
 
 //number of bytes from end of the file to start check
-#define END_FILE_SECTION 10000
+#define END_FILE_SECTION 20000
 
 #define Z_AXIS_ALWAYS_ON 1
 
diff --git a/Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h b/Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h
index 99609cf56..ad9d4a5bf 100644
--- a/Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h
@@ -96,7 +96,7 @@
 #define MANUAL_FEEDRATE {2700, 2700, 1000, 100}   // set the speeds for manual moves (mm/min)
 
 //number of bytes from end of the file to start check
-#define END_FILE_SECTION 10000
+#define END_FILE_SECTION 20000
 
 #define Z_AXIS_ALWAYS_ON 1
 
diff --git a/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
index e87915c7f..06fe8cbde 100644
--- a/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
@@ -107,7 +107,7 @@
 #define NORMAL_MAX_FEEDRATE_XY   200  // max feedrate in mm/s
 
 //number of bytes from end of the file to start check
-#define END_FILE_SECTION 10000
+#define END_FILE_SECTION 20000
 
 #define Z_AXIS_ALWAYS_ON 1
 
diff --git a/Firmware/variants/1_75mm_MK3-MMU-EINSy10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK3-MMU-EINSy10a-E3Dv6full.h
index 877a7d1b2..ce94e3d8c 100644
--- a/Firmware/variants/1_75mm_MK3-MMU-EINSy10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK3-MMU-EINSy10a-E3Dv6full.h
@@ -108,7 +108,7 @@
 #define NORMAL_MAX_FEEDRATE_XY   200  // max feedrate in mm/s
 
 //number of bytes from end of the file to start check
-#define END_FILE_SECTION 10000
+#define END_FILE_SECTION 20000
 
 #define Z_AXIS_ALWAYS_ON 1