josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Properly check for Z crashes while lowering/raising Z for Z calibration

This commit is contained in:
Alex Voinea 2024-02-23 17:01:31 +01:00
parent 8d1c3531c9
commit 59bb30291a
No known key found for this signature in database
GPG Key ID: 37EDFD565CB33BAD
3 changed files with 13 additions and 23 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Firmware/Marlin.h
View File

@ -262,6 +262,7 @@ uint16_t restore_interrupted_gcode();
float __attribute__((noinline)) get_feedrate_mm_s(const float feedrate_mm_min);
#ifdef TMC2130
void check_Z_crash(void);
void homeaxis(uint8_t axis, uint8_t cnt = 1, uint8_t* pstep = 0);
#else
void homeaxis(uint8_t axis, uint8_t cnt = 1);

2
Firmware/Marlin_main.cpp
View File

@ -2192,7 +2192,7 @@ bool calibrate_z_auto()
#endif //TMC2130
#ifdef TMC2130
static void check_Z_crash(void)
void check_Z_crash(void)
{
if (!READ(Z_TMC2130_DIAG)) { //Z crash
FORCE_HIGH_POWER_END;

33
Firmware/mesh_bed_calibration.cpp
View File

@ -2838,6 +2838,7 @@ void go_home_with_z_lift()
// Returns false if the reference values are more than 3mm far away.
bool sample_mesh_and_store_reference()
{
bool result = false;
#ifdef TMC2130
tmc2130_home_enter(Z_AXIS_MASK);
#endif
@ -2856,30 +2857,23 @@ bool sample_mesh_and_store_reference()
// Sample Z heights for the mesh bed leveling.
// In addition, store the results into an eeprom, to be used later for verification of the bed leveling process.
{
// The first point defines the reference.
// Lower Z to the mesh search height with stall detection
enable_endstops(true);
current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
go_to_current(homing_feedrate[Z_AXIS]/60);
check_Z_crash();
enable_endstops(false);
// Move XY to first point
current_position[X_AXIS] = BED_X0;
current_position[Y_AXIS] = BED_Y0;
world2machine_clamp(current_position[X_AXIS], current_position[Y_AXIS]);
go_to_current(homing_feedrate[X_AXIS]/60);
set_destination_to_current();
enable_endstops(true);
homeaxis(Z_AXIS);
#ifdef TMC2130
if (!axis_known_position[Z_AXIS] && (!READ(Z_TMC2130_DIAG))) //Z crash
{
kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
goto fail;
}
#endif //TMC2130
enable_endstops(false);
if (!find_bed_induction_sensor_point_z()) //Z crash or deviation > 50um
{
kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
goto fail;
}
mbl.set_z(0, 0, current_position[Z_AXIS]);
}
@ -2905,7 +2899,6 @@ bool sample_mesh_and_store_reference()
if (!find_bed_induction_sensor_point_z()) //Z crash or deviation > 50um
{
kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
goto fail;
}
// Get cords of measuring point
@ -2924,7 +2917,7 @@ bool sample_mesh_and_store_reference()
// The span of the Z offsets is extreme. Give up.
// Homing failed on some of the points.
SERIAL_PROTOCOLLNPGM("Exreme span of the Z values!");
goto fail;
goto end;
}
}
@ -2965,18 +2958,14 @@ bool sample_mesh_and_store_reference()
go_home_with_z_lift();
result = true;
end:
enable_endstops(endstops_enabled);
enable_z_endstop(endstop_z_enabled);
#ifdef TMC2130
tmc2130_home_exit();
#endif
return true;
fail:
#ifdef TMC2130
tmc2130_home_exit();
#endif
return false;
return result;
}
#ifndef NEW_XYZCAL