Lang - manualy corrected dictionaries (menu alignment)

lang/lang_en_cz.txt

@@ -1388,4 +1388,4 @@
 
 #MSG_OFF c=0 r=0
 " [off]"
-"\x00"
+" [vyp]"

lang/lang_en_de.txt

@@ -60,7 +60,7 @@
 
 #
 "Auto deplete[N/A]"
-"Restemodus[N/V]"
+"Restemodus  [N/V]"
 
 # MSG_AUTO_DEPLETE_OFF c=17 r=1
 "Auto deplete[off]"
@@ -336,7 +336,7 @@
 
 #MSG_FSENS_AUTOLOAD_ON c=17 r=1
 "F. autoload  [on]"
-"F.Autoladen[an]"
+"F.Autoladen  [an]"
 
 #MSG_FSENS_AUTOLOAD_NA c=17 r=1
 "F. autoload [N/A]"
@@ -356,11 +356,11 @@
 
 #MSG_FANS_CHECK_ON c=17 r=1
 "Fans check   [on]"
-"Luefter Chk.[an]"
+"Luefter Chk. [an]"
 
 #MSG_FANS_CHECK_OFF c=17 r=1
 "Fans check  [off]"
-"Luefter Chk. [aus]"
+"Luefter Chk.[aus]"
 
 #MSG_FSENSOR_ON c=0 r=0
 "Fil. sensor  [on]"
@@ -708,11 +708,11 @@
 
 #MSG_AUTO_MODE_ON c=0 r=0
 "Mode [auto power]"
-"Modus [Auto Power]"
+"Modus[Auto Power]"
 
 #MSG_SILENT_MODE_OFF c=0 r=0
 "Mode [high power]"
-"Modus[Hohe Leistung]"
+"Modus[Hohe Leist]"
 
 #MSG_SELFTEST_MOTOR c=0 r=0
 "Motor"
@@ -1020,7 +1020,7 @@
 
 #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
 "SD card [flshAir]"
-"SD Karte [flshAir]"
+"SD Karte[flshAir]"
 
 #MSG_SD_CARD_OK c=0 r=0
 "SD card ok"
@@ -1388,4 +1388,4 @@
 
 #MSG_OFF c=0 r=0
 " [off]"
-"\x00"
+" [AUS]"

lang/lang_en_es.txt

@@ -56,15 +56,15 @@
 
 #MSG_AUTO_DEPLETE_ON c=17 r=1
 "Auto deplete [on]"
-"Auto desplegar[on]"
+"Auto despleg.[on]"
 
 #
 "Auto deplete[N/A]"
-"Auto desplegar[N/A]"
+"Auto despleg[N/A]"
 
 # MSG_AUTO_DEPLETE_OFF c=17 r=1
 "Auto deplete[off]"
-"Auto desplegar[off]"
+"Auto despleg[off]"
 
 #MSG_AUTO_HOME c=0 r=0
 "Auto home"
@@ -192,7 +192,7 @@
 
 #MSG_CRASHDETECT_ON c=0 r=0
 "Crash det.   [on]"
-"Det. choque [activo]"
+"Det. choque [act]"
 
 #MSG_CRASHDETECT_NA c=0 r=0
 "Crash det.  [N/A]"
@@ -200,7 +200,7 @@
 
 #MSG_CRASHDETECT_OFF c=0 r=0
 "Crash det.  [off]"
-"Det. choque [inactivo]"
+"Det. choque [ina]"
 
 #MSG_CRASH_DETECTED c=20 r=1
 "Crash detected."
@@ -336,15 +336,15 @@
 
 #MSG_FSENS_AUTOLOAD_ON c=17 r=1
 "F. autoload  [on]"
-"Autocarga Fil. [activo]"
+"Autocarg.Fil[act]"
 
 #MSG_FSENS_AUTOLOAD_NA c=17 r=1
 "F. autoload [N/A]"
-"Autocarga Fil. [N/D]"
+"Autocarg.Fil[N/D]"
 
 #MSG_FSENS_AUTOLOAD_OFF c=17 r=1
 "F. autoload [off]"
-"Autocarga f. [inactiva]"
+"Autocarg.Fil[ina]"
 
 #MSG_FAN_SPEED c=14 r=0
 "Fan speed"
@@ -356,15 +356,15 @@
 
 #MSG_FANS_CHECK_ON c=17 r=1
 "Fans check   [on]"
-"Comprobacion de ventiladores [activo]"
+"Comprob.vent[act]"
 
 #MSG_FANS_CHECK_OFF c=17 r=1
 "Fans check  [off]"
-"Comprobacion de ventiladores [inactiva]"
+"Comprob.vent[ina]"
 
 #MSG_FSENSOR_ON c=0 r=0
 "Fil. sensor  [on]"
-"Sensor Fil. [activo]"
+"Sensor Fil. [act]"
 
 #MSG_RESPONSE_POOR c=20 r=2
 "Fil. sensor response is poor, disable it?"
@@ -376,7 +376,7 @@
 
 #MSG_FSENSOR_OFF c=0 r=0
 "Fil. sensor [off]"
-"Sensor de Fil. [inactivo]"
+"Sensor Fil. [ina]"
 
 #MSG_FILAMENT_CLEAN c=20 r=2
 "Filament extruding & with correct color?"
@@ -708,7 +708,7 @@
 
 #MSG_AUTO_MODE_ON c=0 r=0
 "Mode [auto power]"
-"Modo [fuerza auto]"
+"Modo[fuerza auto]"
 
 #MSG_SILENT_MODE_OFF c=0 r=0
 "Mode [high power]"
@@ -1000,7 +1000,7 @@
 
 #MSG_SECOND_SERIAL_ON c=17 r=1
 "RPi port     [on]"
-"Puerto RPi [activo]"
+"Puerto RPi  [act]"
 
 #
 "Resend"
@@ -1008,7 +1008,7 @@
 
 #MSG_SECOND_SERIAL_OFF c=17 r=1
 "RPi port    [off]"
-"Puerto RPi [inactivo]"
+"Puerto RPi  [ina]"
 
 #MSG_WIZARD_RERUN c=20 r=7
 "Running Wizard will delete current calibration results and start from the beginning. Continue?"
@@ -1020,7 +1020,7 @@
 
 #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
 "SD card [flshAir]"
-"Tarj. SD [FlshAir]"
+"Tarj. SD[FlshAir]"
 
 #MSG_SD_CARD_OK c=0 r=0
 "SD card ok"
@@ -1112,7 +1112,7 @@
 
 #MSG_SORT_ALPHA c=17 r=1
 "Sort:  [alphabet]"
-"Ordenar: [alfabeto]"
+"Ordenar:[alfabet]"
 
 #MSG_SORTING c=20 r=1
 "Sorting files"
@@ -1128,7 +1128,7 @@
 
 #MSG_SOUND_MUTE c=17 r=1
 "Sound      [mute]"
-"Sonido [silenciado]"
+"Sonido[silenciad]"
 
 #
 "Some problem encountered, Z-leveling enforced ..."
@@ -1140,7 +1140,7 @@
 
 #MSG_SOUND_SILENT c=17 r=1
 "Sound    [silent]"
-"Sonido [silencioso]"
+"Sonido[silencios]"
 
 #MSG_SPEED c=0 r=0
 "Speed"
@@ -1252,7 +1252,7 @@
 
 #MSG_SD_VOL_INIT_FAIL c=0 r=0
 "volume.init failed"
-"fallo volume.init "
+"fallo volume.init"
 
 #MSG_USERWAIT c=0 r=0
 "Wait for user..."
@@ -1388,4 +1388,4 @@
 
 #MSG_OFF c=0 r=0
 " [off]"
-"\x00"
+" [OFF]"

lang/lang_en_fr.txt

@@ -60,7 +60,7 @@
 
 #
 "Auto deplete[N/A]"
-"Vidage auto[N/A]"
+"Vidage auto [N/A]"
 
 # MSG_AUTO_DEPLETE_OFF c=17 r=1
 "Auto deplete[off]"
@@ -192,15 +192,15 @@
 
 #MSG_CRASHDETECT_ON c=0 r=0
 "Crash det.   [on]"
-"Detect. crash [on]"
+"Detect. crash[on]"
 
 #MSG_CRASHDETECT_NA c=0 r=0
 "Crash det.  [N/A]"
-"Detect. crash [N/A]"
+"Detect.crash[N/A]"
 
 #MSG_CRASHDETECT_OFF c=0 r=0
 "Crash det.  [off]"
-"Detect. crash [off]"
+"Detect.crash[off]"
 
 #MSG_CRASH_DETECTED c=20 r=1
 "Crash detected."
@@ -372,11 +372,11 @@
 
 #MSG_FSENSOR_NA c=0 r=0
 "Fil. sensor [N/A]"
-"Capteur Fil. [N/A]"
+"Capteur Fil.[N/A]"
 
 #MSG_FSENSOR_OFF c=0 r=0
 "Fil. sensor [off]"
-"Capteur Fil. [off]"
+"Capteur Fil.[off]"
 
 #MSG_FILAMENT_CLEAN c=20 r=2
 "Filament extruding & with correct color?"
@@ -708,11 +708,11 @@
 
 #MSG_AUTO_MODE_ON c=0 r=0
 "Mode [auto power]"
-"Mode [puissance auto]"
+"Mode[puissan.aut]"
 
 #MSG_SILENT_MODE_OFF c=0 r=0
 "Mode [high power]"
-"Mode [haute puissance]"
+"Mode[haute puiss]"
 
 #MSG_SELFTEST_MOTOR c=0 r=0
 "Motor"
@@ -1020,7 +1020,7 @@
 
 #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
 "SD card [flshAir]"
-"Carte SD [flashAir]"
+"Carte SD[flshAir]"
 
 #MSG_SD_CARD_OK c=0 r=0
 "SD card ok"
@@ -1184,7 +1184,7 @@
 
 #MSG_TEMP_CALIBRATION_OFF c=20 r=1
 "Temp. cal.  [off]"
-"Calib. Temp. [off]"
+"Calib. Temp.[off]"
 
 #MSG_CALIBRATION_PINDA_MENU c=17 r=1
 "Temp. calibration"

lang/lang_en_it.txt

@@ -28,11 +28,11 @@
 
 #MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
 "\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode"
-"[2JRilev. impatto [1;0Hattivabile solo[2;0Hin Modalita normale"
+"\x1b[2JRilev. impatto\x1b[1;0Hattivabile solo\x1b[2;0Hin Modalita normale"
 
 #MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
 "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
-"[2JATTENZIONE:[1;0HRilev. impatto [2;0Hdisattivato in[3;0HModalita silenziosa"
+"\x1b[2JATTENZIONE:\x1b[1;0HRilev. impatto\x1b[2;0Hdisattivato in\x1b[3;0HModalita silenziosa"
 
 #MSG_BABYSTEPPING_Z c=20 r=0
 "Adjusting Z"
@@ -56,15 +56,15 @@
 
 #MSG_AUTO_DEPLETE_ON c=17 r=1
 "Auto deplete [on]"
-"Esaurimento automatico [on]"
+"Auto svuotam [on]"
 
 #
 "Auto deplete[N/A]"
-"Auto svuotamento[N/A]"
+"Auto svuotam[N/A]"
 
 # MSG_AUTO_DEPLETE_OFF c=17 r=1
 "Auto deplete[off]"
-"Esaurimento automatico [off]"
+"Auto svuotam[off]"
 
 #MSG_AUTO_HOME c=0 r=0
 "Auto home"
@@ -192,15 +192,15 @@
 
 #MSG_CRASHDETECT_ON c=0 r=0
 "Crash det.   [on]"
-"Rilevamento imp. [on]"
+"Rilevam.imp. [on]"
 
 #MSG_CRASHDETECT_NA c=0 r=0
 "Crash det.  [N/A]"
-"Rilevamento imp. [N/A]"
+"Rilevam.imp.[N/A]"
 
 #MSG_CRASHDETECT_OFF c=0 r=0
 "Crash det.  [off]"
-"Rilevamento imp. [off]"
+"Rilevam.imp.[off]"
 
 #MSG_CRASH_DETECTED c=20 r=1
 "Crash detected."
@@ -296,7 +296,7 @@
 
 #MSG_FSENS_NOT_RESPONDING c=20 r=4
 "ERROR: Filament sensor is not responding, please check connection."
-"ERRORE: il sensore filam. non risponde, Controllare conness."
+"ERRORE: il sensore filam. non risponde,Controllare conness."
 
 #MSG_ERROR c=0 r=0
 "ERROR:"
@@ -336,15 +336,15 @@
 
 #MSG_FSENS_AUTOLOAD_ON c=17 r=1
 "F. autoload  [on]"
-"Autocaric. filam. [on]"
+"Autocar.filam[on]"
 
 #MSG_FSENS_AUTOLOAD_NA c=17 r=1
 "F. autoload [N/A]"
-"Autocaric. filam.[N/A]"
+"Autocar.fil.[N/A]"
 
 #MSG_FSENS_AUTOLOAD_OFF c=17 r=1
 "F. autoload [off]"
-"Autocaric. filam. [off]"
+"Autocar.fil.[off]"
 
 #MSG_FAN_SPEED c=14 r=0
 "Fan speed"
@@ -360,11 +360,11 @@
 
 #MSG_FANS_CHECK_OFF c=17 r=1
 "Fans check  [off]"
-"Controllo ventole [off]"
+"Control.vent[off]"
 
 #MSG_FSENSOR_ON c=0 r=0
 "Fil. sensor  [on]"
-"Sensore filam. [On]"
+"Sensor filam.[On]"
 
 #MSG_RESPONSE_POOR c=20 r=2
 "Fil. sensor response is poor, disable it?"
@@ -372,11 +372,11 @@
 
 #MSG_FSENSOR_NA c=0 r=0
 "Fil. sensor [N/A]"
-"Sensore filam. [N/A]"
+"Sensor filam[N/A]"
 
 #MSG_FSENSOR_OFF c=0 r=0
 "Fil. sensor [off]"
-"Sensore filam. [off]"
+"Sensor filam[off]"
 
 #MSG_FILAMENT_CLEAN c=20 r=2
 "Filament extruding & with correct color?"
@@ -1020,7 +1020,7 @@
 
 #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
 "SD card [flshAir]"
-"scheda SD [flshAir]"
+"Mem. SD [flshAir]"
 
 #MSG_SD_CARD_OK c=0 r=0
 "SD card ok"
@@ -1112,7 +1112,7 @@
 
 #MSG_SORT_ALPHA c=17 r=1
 "Sort:  [alphabet]"
-"Ordine:[alfabetico]"
+"Ordine: [alfabet]"
 
 #MSG_SORTING c=20 r=1
 "Sorting files"
@@ -1140,7 +1140,7 @@
 
 #MSG_SOUND_SILENT c=17 r=1
 "Sound    [silent]"
-"Suono [silenzioso]"
+"Suono[silenzioso]"
 
 #MSG_SPEED c=0 r=0
 "Speed"
@@ -1184,7 +1184,7 @@
 
 #MSG_TEMP_CALIBRATION_OFF c=20 r=1
 "Temp. cal.  [off]"
-"Calib. temp. [OFF]"
+"Calib. temp.[OFF]"
 
 #MSG_CALIBRATION_PINDA_MENU c=17 r=1
 "Temp. calibration"
@@ -1388,4 +1388,4 @@
 
 #MSG_OFF c=0 r=0
 " [off]"
-"\x00"
+" [OFF]"

lang/lang_en_pl.txt

@@ -28,11 +28,11 @@
 
 #MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
 "\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode"
-"[2JWykrywanie zderzen moze [1;0Hbyc wlaczone tylko w [2;0Htrybie Normalnym"
+"\x1b[2JWykrywanie zderzen moze\x1b[1;0Hbyc wlaczone tylko w\x1b[2;0Htrybie Normalnym"
 
 #MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
 "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
-"[2JUWAGA:[1;0HWykrywanie zderzen[2;0Hwylaczone w[3;0Htrybie Stealth"
+"\x1b[2JUWAGA:\x1b[1;0HWykrywanie zderzen\x1b[2;0Hwylaczone w\x1b[3;0Htrybie Stealth"
 
 #MSG_BABYSTEPPING_Z c=20 r=0
 "Adjusting Z"
@@ -56,11 +56,11 @@
 
 #MSG_AUTO_DEPLETE_ON c=17 r=1
 "Auto deplete [on]"
-"Dok. resztek[wl]"
+"Dok. resztek [wl]"
 
 #
 "Auto deplete[N/A]"
-"Wykorzyst. reszt.[nd]"
+"Dok. resztek [nd]"
 
 # MSG_AUTO_DEPLETE_OFF c=17 r=1
 "Auto deplete[off]"
@@ -192,15 +192,15 @@
 
 #MSG_CRASHDETECT_ON c=0 r=0
 "Crash det.   [on]"
-"Wykr. zderzen [wl]"
+"Wykr.zderzen [wl]"
 
 #MSG_CRASHDETECT_NA c=0 r=0
 "Crash det.  [N/A]"
-"Wykr. zderzen [n/d]"
+"Wykr.zderzen[n/d]"
 
 #MSG_CRASHDETECT_OFF c=0 r=0
 "Crash det.  [off]"
-"Wykr. zderzen [wyl]"
+"Wykr.zderzen[wyl]"
 
 #MSG_CRASH_DETECTED c=20 r=1
 "Crash detected."
@@ -336,15 +336,15 @@
 
 #MSG_FSENS_AUTOLOAD_ON c=17 r=1
 "F. autoload  [on]"
-"Autolad. fil[wl]"
+"Autolad. fil [wl]"
 
 #MSG_FSENS_AUTOLOAD_NA c=17 r=1
 "F. autoload [N/A]"
-"Autoladowanie fil. [N/D]"
+"Autolad.fil.[N/D]"
 
 #MSG_FSENS_AUTOLOAD_OFF c=17 r=1
 "F. autoload [off]"
-"Autolad. fil[wyl]"
+"Autolad.fil.[wyl]"
 
 #MSG_FAN_SPEED c=14 r=0
 "Fan speed"
@@ -356,15 +356,15 @@
 
 #MSG_FANS_CHECK_ON c=17 r=1
 "Fans check   [on]"
-"Sprawdzanie wentylatorow [wl]"
+"Sprawd.went. [wl]"
 
 #MSG_FANS_CHECK_OFF c=17 r=1
 "Fans check  [off]"
-"Sprawdzanie wentylatorow [wyl]"
+"Sprawd.went.[wyl]"
 
 #MSG_FSENSOR_ON c=0 r=0
 "Fil. sensor  [on]"
-"Czuj. filamentu. [wl]"
+"Czuj. filam. [wl]"
 
 #MSG_RESPONSE_POOR c=20 r=2
 "Fil. sensor response is poor, disable it?"
@@ -372,11 +372,11 @@
 
 #MSG_FSENSOR_NA c=0 r=0
 "Fil. sensor [N/A]"
-"Czuj. filamentu [N/D]"
+"Czuj. filam.[N/D]"
 
 #MSG_FSENSOR_OFF c=0 r=0
 "Fil. sensor [off]"
-"Czuj. fil. [wyl]"
+"Czuj. filam.[wyl]"
 
 #MSG_FILAMENT_CLEAN c=20 r=2
 "Filament extruding & with correct color?"
@@ -708,11 +708,11 @@
 
 #MSG_AUTO_MODE_ON c=0 r=0
 "Mode [auto power]"
-"Tryb [automatyczny]"
+"Tryb [automatycz]"
 
 #MSG_SILENT_MODE_OFF c=0 r=0
 "Mode [high power]"
-"Tryb [wysoka wydajnosc]"
+"Tryb[wysoka wyd.]"
 
 #MSG_SELFTEST_MOTOR c=0 r=0
 "Motor"
@@ -1016,11 +1016,11 @@
 
 #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1
 "SD card  [normal]"
-"Karta SD [normalna]"
+"Karta SD [normal]"
 
 #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
 "SD card [flshAir]"
-"Karta SD [FlashAir]"
+"Karta SD[FlshAir]"
 
 #MSG_SD_CARD_OK c=0 r=0
 "SD card ok"
@@ -1112,7 +1112,7 @@
 
 #MSG_SORT_ALPHA c=17 r=1
 "Sort:  [alphabet]"
-"Sortuj:[alfabet]"
+"Sortuj: [alfabet]"
 
 #MSG_SORTING c=20 r=1
 "Sorting files"
@@ -1128,7 +1128,7 @@
 
 #MSG_SOUND_MUTE c=17 r=1
 "Sound      [mute]"
-"Dzwiek [Wylaczony]"
+"Dzwiek[Wylaczony]"
 
 #
 "Some problem encountered, Z-leveling enforced ..."
@@ -1180,11 +1180,11 @@
 
 #MSG_TEMP_CALIBRATION_ON c=20 r=1
 "Temp. cal.   [on]"
-"Kalibr. temp. [wl]"
+"Kalibr. temp.[wl]"
 
 #MSG_TEMP_CALIBRATION_OFF c=20 r=1
 "Temp. cal.  [off]"
-"Kalibr. temp. [wyl]"
+"Kalibr.temp.[wyl]"
 
 #MSG_CALIBRATION_PINDA_MENU c=17 r=1
 "Temp. calibration"
@@ -1388,4 +1388,4 @@
 
 #MSG_OFF c=0 r=0
 " [off]"
-"\x00"
+" [wyl]"