Merge pull request #1128 from PavelSindler/MK3_for_merging

translations

Firmware/messages.c

@@ -32,6 +32,7 @@ const char MSG_Enqueing[] PROGMEM_I1 = ISTR("enqueing \""); ////c=0 r=0
 const char MSG_ERR_STOPPED[] PROGMEM_I1 = ISTR("Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"); ////c=0 r=0
 const char MSG_ERROR[] PROGMEM_I1 = ISTR("ERROR:"); ////c=0 r=0
 const char MSG_EXTRUDER[] PROGMEM_I1 = ISTR("Extruder"); ////c=17 r=1
+const char MSG_FILAMENT[] PROGMEM_I1 = ISTR("Filament"); ////c=17 r=1
 const char MSG_FAN_SPEED[] PROGMEM_I1 = ISTR("Fan speed"); ////c=14 r=0
 const char MSG_FILAMENT_CLEAN[] PROGMEM_I1 = ISTR("Filament extruding & with correct color?"); ////c=20 r=2
 const char MSG_FILAMENT_LOADING_T0[] PROGMEM_I1 = ISTR("Insert filament into extruder 1. Click when done."); ////c=20 r=4
@@ -51,6 +52,7 @@ const char MSG_HEATING[] PROGMEM_I1 = ISTR("Heating"); ////c=0 r=0
 const char MSG_HEATING_COMPLETE[] PROGMEM_I1 = ISTR("Heating done."); ////c=20 r=0
 const char MSG_HOMEYZ[] PROGMEM_I1 = ISTR("Calibrate Z"); ////c=0 r=0
 const char MSG_CHOOSE_EXTRUDER[] PROGMEM_I1 = ISTR("Choose extruder:"); ////c=20 r=1
+const char MSG_CHOOSE_FILAMENT[] PROGMEM_I1 = ISTR("Choose filament:"); ////c=20 r=1
 const char MSG_LOAD_FILAMENT[] PROGMEM_I1 = ISTR("Load filament"); ////c=17 r=0
 const char MSG_LOADING_FILAMENT[] PROGMEM_I1 = ISTR("Loading filament"); ////c=20 r=0
 const char MSG_M117_V2_CALIBRATION[] PROGMEM_I1 = ISTR("M117 First layer cal."); ////c=25 r=1

lang/lang_en.txt

@@ -361,6 +361,12 @@
 #MSG_CHOOSE_EXTRUDER c=20 r=1
 "Choose extruder:"
 
+#MSG_CHOOSE_FILAMENT c=20 r=1
+"Choose filament:"
+
+#MSG_FILAMENT c=17 r=1
+"Filament"
+
 #MSG_WIZARD_XYZ_CAL c=20 r=8
 "I will run xyz calibration now. It will take approx. 12 mins."
 

lang/lang_en_cz.txt

@@ -482,6 +482,14 @@
 "Choose extruder:"
 "Vyberte extruder:"
 
+#MSG_CHOOSE_FILAMENT c=20 r=1
+"Choose filament:"
+"Vyberte filament:"
+
+#MSG_FILAMENT c=17 r=1
+"Filament"
+"Filament"
+
 #MSG_WIZARD_XYZ_CAL c=20 r=8
 "I will run xyz calibration now. It will take approx. 12 mins."
 "Nyni provedu xyz kalibraci. Zabere to priblizne 12 min."

lang/lang_en_de.txt

@@ -482,6 +482,14 @@
 "Choose extruder:"
 "Extruder waehlen:"
 
+#MSG_CHOOSE_FILAMENT c=20 r=1
+"Choose filament:"
+"Filament waehlen:"
+
+#MSG_FILAMENT c=17 r=1
+"Filament"
+"Filament"
+
 #MSG_WIZARD_XYZ_CAL c=20 r=8
 "I will run xyz calibration now. It will take approx. 12 mins."
 "Ich werde jetzt die XYZ-Kalibrierung durchfuehren. Es wird ca. 12 Minuten dauern."

lang/lang_en_es.txt

@@ -482,6 +482,14 @@
 "Choose extruder:"
 "Elegir extrusor:"
 
+#MSG_CHOOSE_FILAMENT c=20 r=1
+"Choose filament:"
+"Elegir filamento:"
+
+#MSG_FILAMENT c=17 r=1
+"Filament"
+"Filamento"
+
 #MSG_WIZARD_XYZ_CAL c=20 r=8
 "I will run xyz calibration now. It will take approx. 12 mins."
 "Hare la calibracion XYZ. Tardara 12 min. aproximadamente."

lang/lang_en_fr.txt

@@ -480,7 +480,15 @@
 
 #MSG_CHOOSE_EXTRUDER c=20 r=1
 "Choose extruder:"
-"Choisir extrudeur :"
+"Choisir extrudeur:"
+
+#MSG_CHOOSE_FILAMENT c=20 r=1
+"Choose filament:"
+"Choisir filament:"
+
+#MSG_FILAMENT c=17 r=1
+"Filament"
+"Filament"
 
 #MSG_WIZARD_XYZ_CAL c=20 r=8
 "I will run xyz calibration now. It will take approx. 12 mins."

lang/lang_en_it.txt

@@ -482,6 +482,14 @@
 "Choose extruder:"
 "Seleziona estrusore:"
 
+#MSG_CHOOSE_FILAMENT c=20 r=1
+"Choose filament:"
+"Seleziona filamento:"
+
+#MSG_FILAMENT c=17 r=1
+"Filament"
+"Filamento"
+
 #MSG_WIZARD_XYZ_CAL c=20 r=8
 "I will run xyz calibration now. It will take approx. 12 mins."
 "Adesso avviero una Calibrazione XYZ. Puo durare circa 12 min."

lang/lang_en_pl.txt

@@ -482,6 +482,14 @@
 "Choose extruder:"
 "Wybierz ekstruder:"
 
+#MSG_CHOOSE_FILAMENT c=20 r=1
+"Choose filament:"
+"Wybierz filament:"
+
+#MSG_FILAMENT c=17 r=1
+"Filament"
+"Filament"
+
 #MSG_WIZARD_XYZ_CAL c=20 r=8
 "I will run xyz calibration now. It will take approx. 12 mins."
 "Przeprowadze teraz kalibracje XYZ. Zajmie ok. 12 min."